Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool duet washer....will not start after pushing start button. door does not lock....like it is "dead". HELP!!!!!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your timer/main controller/CCU has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!$!$

Posted on Sep 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool duet washer, door locked light on door open no other lights on unable to set control


The control can be locked to keep the buttons from activating during external cleaning or to help from small children starting the machine.

To activate or deactivate press and hold the "end of cycle signal" button for 3 seconds.

Jun 21, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Washing Machine


Check the door lock. Whirlpool has had some problems with those in the past. If it is not locking the door lock assy may be bad

Sep 10, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool duet sport washer power button problem. I have to push power button a 10-15 times and the power will be on. Please help.


pushing the button that many time is not the problem on this type of unit you push the start and hold of about 5 sec's then you'll hear the unit start door lock and oper through a normal cyc a word of advice don't close the door very hard push into place these things are plastic and will break the latch assy then will cost $$$ for parts good luck

Aug 26, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Duet washer stopped during wash cycle.


take off the panel below the door three screws and look for the tech sheet located on the right side. It will coach yoou thru the codes and common problems. Sounds like it may be the door swithch does it lock when you push the start? If not the door switch my guess would be a machine control. 877-262-1479 parts.

May 30, 2009 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

When I push and hold start nothing happens


can also be an issue with t door lock/latch assy, if it doeesnt recognize the door closed it wont start

Feb 21, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool Duet front load washer won't start


The error codes it is showing don't even exist. Does the little round door latch plunger go in and out if you push it?If not, then replace the door latch. If so, you most likely have a bad machine control. Please contact me if you need further help or leave feedback if appropriate as that is how I get paid. Thanks for letting me help you!

Nov 30, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool Duet


try hitting pause cancel twice if that doesnt work turn the dial around all the way to off try to unplug the washer if all that fails the remove the three torx screws remove the lower panel and reach up where the latch is after unpluging the washer on the bottom of the latch is a tear shaped tab pull it down till it clicks that will unlock the door

Mar 30, 2008 | Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft....

2 Answers

Front Loading Duet Washer will not start


You have to set your programme FIRST, then put the "on" switch. Try.

Mar 26, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...