posted by knitwit on May 04, 2008
I interrupted the final spin cycle(shut machine off) as it was walking across the floor. Now it seems to be stuck on the place where I stopped it. I unplugged it overnight and it didn't make any difference. Machine shows no error code. Just stuck with 8 minutes left on final spin and will not advance.
Comment by knitwit, posted on May 05, 2008
problem solved. I unplugged it again for 24 hours and it has corrected itself.
Solution #1
posted on May 24, 2008
Another computer generated flaw.The worst thing is alot of times that "flaw" can be a costly one
Was this solution helpful? Show your Appreciation by rating it:
Suggest a new solution for this problem
Post a New problem for Maytag Neptune MAH5500B Front Load
Email this problem
Post a New problem for Maytag Neptune MAH5500B Front Load
Email this problem
Can you Help with these Washing Machines problems?
Maytag Neptune MAH5500B Front Load Washer
not spinning, not drying
not spinning, not drying
washer is not drying
Washer... Answer This...
Maytag Neptune MAH5500B Front Load Washer
MAH8700AWW
MAH8700AWW
We were washing a load and the... Answer This...
Maytag Neptune MAH5500B Front Load Washer
can someone help me please,,,,,...
can someone help me please,,,,,...
the ccu board went bad, I put... Answer This...
Maytag Neptune MAH5500B Front Load Washer
Maytab Neptune FL washer
Maytab Neptune FL washer
the lights on the panel won't... Answer This...
Repair Service
Find Washing Machine Repairman Near You:
Find Parts
