Question about Whirlpool Duet Sport HT WFW8400TE Washer

1 Answer

My washer will not start it says" F-01" and constantly blinks when I try to press start. HELP!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. Error F01 in your whirlpool duet sport indicates EEPROM error which means that a communication error between the Central Control Unit (CCU)
and the EEPROM onboard the CCU occurred. This error also occurs when the pump driver fails to activate and/or one of the main relays is not working. To resolve this issue leave the unit unplugged for 5-10 minutes so that if this was caused due to power surge it is cleared. Also check the CCU (central control unit), if bad you’ll have to replace it.
Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Posted on Aug 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dishwasher clean light blinks constantly, can't get washer to start up and wash. Buttons will light up but it wont start.


Hello, Thank You for using FixYa. I will be helping you today.Try pressing heated dry,Normal,Heated dry,Normal and all lights should come on if they do wait like 5 seconds and hit cancel and see if the unit will start. If this happens again it may be a heating issue.
Thank You and please rate my answer if it was helpful..

Jun 22, 2011 | KitchenAid Dishwashers

1 Answer

Washer will not start. Accidentally pressed 'off" button and now the start light is blinking and I can't change the settings or start the washer


try unplugging the washer for 5 mins. to reset the main control board, if that doesn't help check to see if both door latches are locking

Jun 03, 2011 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

I have an error code displayed on the copier as, H5-01 Please can you help/advice on the reset code which i could use.


When your copier heater unite thermostat is out of order then show H5-01 is blinking.
You can reset it Press # interrupt 0 Interrupt press 14 press print key or start button then machine is ready.If are not success you must change it.

Aug 03, 2010 | Sharp AR-M162 All-In-One Laser Printer

1 Answer

The error indicator is staying lit constantly on Toshiba e-studio


The drum counter reaches 25000 copies , it's time to change the drum and reset counter .
Enter the reset mode by pressing : # - * - c - * .
then press : 20 - start -01- start - CA - CA .
Hope this will help .

Feb 28, 2010 | Toshiba e-Studio162D Copier

1 Answer

Washer displays variable code F-01 press the off button once and the code # disappears unplug the washer for 2 hours and try to start washer and receive the same code F-01


Hi I purchased another machine "kitchen aid" I have been told by many repair techs that they have had nothing but problems with front load machines and one company won't even work on them and no the solutions that I received did not work and the ccu part costs around $300.00 so I have given up on whirlpool and sears for the no help I received from them and will never by another prod. of anykind from sears again. Thank you for your help.

Jan 08, 2010 | Washing Machines

1 Answer

Washer will not start on any cycle. Any position


It may be the lid switch? If the lid isn't shut, then on most models the machine won't start.

Anymore queries, please post and I will try to help you.

Jun 18, 2009 | Kenmore Oasis HE 27082 Top Load Washer

2 Answers

Whirlpool AWM8121-The Rinse and Door open light blinks constantly


This error code means there is an abnormality.
If the on-off door lock LED on a Whirlpool washer flashes rapidly at the same time as at least one other LED, then this means there is an abnormality.
Try first to reset the machine. You can press and hold the reset button for a couple of seconds, otherwise turn off the power completely (unplug it) for 5 mins.


reset-whirlpool-awm8121-4xbpm0x4xarp04nz1sgqugzl-2-0.jpg

Mar 01, 2018 | Whirlpool AWM8123 Front Load Washer

1 Answer

Clean light blinks constantly



press heated dry
press normal wash
press heated dry again
press normal wash again..........
.....wait a few seconds
all the lights should come on
press cancel (should hear pump)
hit cancel again

Hope this helps, it worked for me, but it may depend on your model.

Feb 05, 2009 | Kenmore Dishwashers

1 Answer

Lights on the Asko D1996 keep blinking


This depends on the blinking pattern. Of the eight lights on the panel, if the four on the left blink on and then the right four lights blink on as the left ones go off, and keep blinking back and forth, that just means the mode has been set and the Start button pressed. After closing the door it should just continue on wherever it is in the cycle. (This is normal operation).
If you hold down the Start button, this resets the dishwasher. If you then close the door, nothing will happen because it thinks it's done.
If the lights are blinking in a different pattern, such as they all blink on and off in unison, that indicates an error condition and needs to be diagnosed. If the pump is not running constantly, then at least it's not because water is leaking out somewhere.

Sep 23, 2008 | Asko D1996SS Built-in Dishwasher

1 Answer

Blinking lights


Press "end of cycle" to get machine to normal. Then plug off the wall. Check your exit hose spigot, it may be clogged. This is if your filter is all clean. There should be air for passage in the standpipe behind. Your hose should not fit airtight into the standpipe and neither too deep into it. Snaking out your standpipe would be good too.

Rate me pl.....if helped.

Jan 04, 2008 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Whirlpool Duet Sport HT WFW8400TE Washer Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

yadayada
yadayada

Level 3 Expert

80339 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...