Question about Washing Machines

1 Answer

Whirlpool Washing Machine. About 10 years old, was working good till a couple days ago,problem is that it wont start the washing cycle, spilled all the water ,don't know from where,water was spilled all over the floor, not from the drain hose, now if I set the washer on, it won't do anything,I just hear a little whissleing sound, (electric sound) but it won't sart filling water up or motor won't start. any ideas? Thank you.

Posted by on

  • dklmn66 Aug 23, 2010

    no, nothing, but it seems like power(electic) gets to it ok,

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

Is there any flashing LED lights in the control panel?

Posted on Aug 23, 2010

  • INDIRA KUMAR
    INDIRA KUMAR Aug 23, 2010

    Then using an continuity tester we need to check the power at the motor terminals.If there is power and still if it didnot run, then you can remove the motor and test the motor seperately.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won,t work just flashing blue light


Cycle light flashes, but machine wont start - Kenmore Elite ...

https://www.ifixit.com/.../Cycle+light+flashes,+but+machine+wont+...
iFixitThe Kenmore Elite HE3 is a washing machine by Kenmore. ... Whatever cycle I choose, the light just flashes and holding the start button ... I don't seem to have a black pin....the normal wash button just keeps flashing and won't let me start or .

The good ol' Whirlpool Lid Lock Flashing Light Problem - ApplianceBlog

www.applianceblog.com/.../42456-The-good-ol-Whirlpool-Lid-Lock-Fl...
Dec 11, 2013 - 10 posts - ‎3 authors Red Lid Lock light flashing intermittently when you try to start a cycle. ... Mode -- Lid Lock won't work, nor will anything that requires the lid to ... Once the lid has locked the second time, the washer ... shuts down with the lid lock blinking; go back into diagnostic codes and look for shifter or speed sensor errors ...

Nov 26, 2015 | Washing Machines

1 Answer

I have a Whirlpool Ultimate Care II washing machine, model number: LSQ9110PW3 that stopped working properly two days ago. At first it seemed to not be able to go into the spin cycle. However, I just...


You have one of the best washers ever made... It is called a "Direct Drive" by us technicians. You probably need this part, but NEVER get rid of this machine as NOTHING out there is this good- not for anyprice. https://www.repairclinic.com/PartDetail/Whirlpool-Washing-Machine-Motor-Coupling/285753A/1195967?modelNumber=LSQ9110PW3&ss=a11b5d654521&mr=1

Apr 07, 2017 | Whirlpool Washing Machines

1 Answer

Dishwasher won't wash


pump is likely gone ......without pressure from the pump .the arms will not turn and no water will shoot from the arm jets .....it's kinda like a whirlpool tub that way .....no pump no bubbles ..good luck

Jul 25, 2009 | Frigidaire 24 in. FDB1050RE Built-in...

2 Answers

Leaves white marks on coloured clothes


I'd try putting the machine on a hot fill wash, max water level put in half a cup of baking soda when the machine starts to washer turn it off and leave it to soak overnight, then let it finish the cycle the next day. Also make sure you tip some of the hot water down the beach dispenser and clean all around the top of the machine

Cheers

Mar 25, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Door locking is flashing so it wont start a cycle


Try pressing "end of cycle" button; wait a couple of minutes to open your door, do not force. Then shut door to restart your new cycle..........

Rate me pl. if helped. If not click 'thanks for trying', this prob will come up for others to solve.

Jan 13, 2008 | Washing Machines

2 Answers

Washer will fill but won't "wash"


what kind of click are you hearing like a timer advancing or a hum them a click about every 10 minutes and dont rate me yet till were done

Jan 11, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool Washing Machine is going to explode(shakes and shimmies)


put your level on the machine Adjust the legs so when you push down on any corner there is no rocking - easy

Nov 07, 2007 | Whirlpool LSQ9600L Top Load Washer

1 Answer

Drum filling with water


An obstruction in the water-inlet valve may mean that it's no longer able to shut off You can easily open the valve and clean it (from scale or other dirt). Be aware you should disconnect the power cable from machine before doing it !!!! Good luck !

Sep 09, 2007 | Whirlpool AWZ410 Front Load Washer/Dryer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...