Question about Microsoft Office Outlook 2003 for PC

1 Answer

Registered email does not work

Ive installed DVDFab 5 and when i go to register the key it says the email is not in there data base although ive had this same email address for 6years now? please help me solve this problem.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Have you registered and bought DVDFab 5 from DVDFab?

When it says the email isn't in their database, that doesn't mean that the email address doesn't exist, but rather that it hasn't been registered with DVDFab as a legitimate owner of the product. If you've bought DVDFab yourself, check to make sure that you're registering it with the same email address you used to purchase the product.

If you are, and it still isn't working, then it may just be a glitch in DVDFab's customer database. I'd suggest contacting DVDFab directly, making sure to include any information about your DVDFab order, so they can trace it back. Their contact page is at :

http://www.dvdfab.com/contact.htm

Posted on May 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i sync my panasonic phones cordless kx-tga810


335 is the magic code when you want to remove a previous handset or base station registration!
Handset:

1 " (middle soft key) i L i #

2 Enter "335".

3 "Cancel Handset" i #

LThe numbers of all handsets

registered to the base unit are

displayed.

4 Select the handset(s) you want to

cancel, by pressing the desired handset

number. i #
5 "Yes" i # i {ih}
Base Station:

A handset can be registered to a maximum

of 4 base units. A handset can cancel a base

unit that it is registered to. This allows the

handset to "forget" the base unit.

1 " (middle soft key) i N i #

2 "Registration" i #

3 Enter "335".

4 "Cancel Base" i #

5 Select the base unit(s) you want to

cancel, by pressing the desired base unit

number. i #
6 "Yes" i # i {ih}

Dec 23, 2013 | Panasonic KX TGA810 1Line Cordless...

Tip

How To Reset and Re-Register Your Uniden Handset and Base


<b>Clear the Handset's Base Data<br /></b>1.To remove the base data from a handset when out of range of the base, press and hold the 'end' button and the '#' button simultaneously until the phone beeps.<br />2.It will now be de-registered from the base.<br />Note: This requires that the base and handset can communicate with each other.<br /> <br /> <b>Clear the Base Handset Data</b><br />1.To de-register all handsets from the base, remove power to the base, and remove the handset from the base.<br />2.Press and hold the 'flash/find hs' button while applying power.<br />3.Wait for the beep and release the button.<br />4.The charge light will now flash.<br />5.Sit any handset in the cradle.<br />6.When the flashing stops, re-register the handsets to the base.<br /> <br /> <b>Re-Register a Handset to the Base<br /></b>1. Remove Handset Battery.<br />2. Reconnect battery while holding down "*" and "#" key.<br />3. Then press the right upper key under the LCD.<br />4. Press the "End" key.<br />5. Wait a few seconds and then the phone will be ready to register to the base.

on Feb 14, 2011 | Uniden DECT 6.0 Cordless Phone ID

2 Answers

Registration key for dvd fab 8.1.5.9


Download link http://downloadity.net/04lm84 for DVDFab Platinum 9.1.3.8 incl Crack by DAZ.
With this Activation file you will get full and registered DVDFab 9 latest version. All instructions are in the file, also in video DVDFab Platinum 9 1 3 8 Crack and Registration Key by DAZ 2014

Jan 23, 2012 | Computers & Internet

1 Answer

We replaced the base unit and can not register our existing handsets because they were registered to the previous base unit. Once registered the handset's menu doesn't offer a register or...


To un-register the SB67108 handset from a base unit, SB67118 or SB67138, you will need to do these steps in order:
1. Press menu
2. Key in this sequence *883247#
3. Select deregister
4. Unplug the battery for minimum 10 seconds
5. Plug battery back in and it will want to be registered.
6. Follow the directions in your base unit manual to reregister it.
That's it in a nut shell.

Jun 08, 2011 | AT&T SB67108 Phone

1 Answer

My uniden DSS7855 with 1 base station and 3 handsets wont connect when i dial a number and hit the talk button it tries to connect and then comes up "'out of range" much appreciated for any help...


Clear the Handset's Base Data
  1. To remove the base data from a handset when out of range of the base, press and hold the 'end' button and the '#' button simultaneously until the phone beeps.
  2. It will now be de-registered from the base.
Note: This requires that the base and handset can communicate with each other.


Clear the Base Handset Data
  1. To de-register all handsets from the base, remove power to the base, and remove the handset from the base.
  2. Press and hold the 'flash/find hs' button while applying power.
  3. Wait for the beep and release the button.
  4. The charge light will now flash.
  5. Sit any handset in the cradle.
  6. When the flashing stops, re-register the handsets to the base.
Re-Register a Handset to the Base
1. Remove Handset Battery.
2. Reconnect battery while holding down "*" and "#" key.
3. Then press the right upper key under the LCD.
4. Press the "End" key.
5. Wait a few seconds and then the phone will be ready to register to the base.

Nov 12, 2010 | Uniden Lands Phones

2 Answers

My phone says no link to base but I am right beside it.


Sounds like the antenna on the base station is not receiving, or the cordless handset is not transmitting -OR- the sets have never been registered to the base station (please look up registering to base station, if the set has never been registered)

Did the cordless set work before?

The base station or the handset may just have a hick up, I would un-plug the base station and leave it un-plugged... now get all the cordless set(s), and take out the batteries from the cordless set(s). Wait for about 15 seconds for all the power to drain out of the sets, then re-install the batteries.

Once all the cordless sets are back up and working, plug in the base station and wait for about 1 minute.
This forces the base station to re-establish and link between the base station and the cordless sets.

Good luck

May 11, 2009 | Panasonic KX-TGA101S Cordless Handset

2 Answers

NEED TO DEREGISTER LOST HANDSET


The "END" and "#" key combination can be used for several purposes:

1) If wanting to use an ALREADY REGISTERED HANDSET on an alternate base, and if if the INITIAL BASE isn't available to deregister the handset:

1a) Press "END" + "#" until it for 5+ seconds (wait for it to beep)
1b) Choose the "Base Unavailable" option
1c) That'll deregister the CURRENT HANDSET so that it can be re-registered on ANY base.

2) If a BASE has a handset registered to it which you no longer want registered but the registered handset is missing or broken:

2a) Grab another WORKING handset which is properly REGISTERED to the BASE in question
2b) Press and hold the "END" + "#" key for 5+ seconds (wait for it to beep)
2c) Choose the "Deregister HS" menu option
2d) Pick the REGISTERED HANDSET # to de-register. (Every other registered handset EXCEPT THE ONE YOU'RE ON will appear in the list!)

May 08, 2009 | Uniden TRU8866 Cordless Phone

5 Answers

How to deregister a handset without the base with which it orginally registered. The reason is that that based was destroyed in fire, only the handset survived. Can anything be done to make the HS become...


Uniden TRU 8888Handset Reset (De-Register): 1. Remove Battery. 2. Reconnect battery while holding down "*" and "#" key. 3. Then press the right upper soft key under the LCD. 4. Press the "End" key. 5. Phone will be ready to register to the base.

Dec 20, 2007 | Uniden Cordless Phone

4 Answers

TWX977 submersible unable to base register


push menu on base station - select register phone

push # sign on twx977 phone at the same time

phone will register on 9485 base station and unit

Sep 09, 2007 | Uniden TRU9485 Cordless Phone

Not finding what you are looking for?
Microsoft Office Outlook 2003 for PC Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...