Question about NetGear WGR614 Wireless Router

1 Answer

Netgear614 to compac pc laptop

I tried running program cd through laptop and office comptor with earthnet with no luck .my pc says net gear is connected but the i isnt lit up.im trying to connect to a nfusion satellite iks reciever,ip address shows net gears on nfusion not pc and i is orange. need to correct this. thank you in advance!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 144 Answers

Hello!

-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this and see if this help solve your problem

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings Step 7: test the Internet connection.

Posted on May 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell inspirion 537 is locked asking for username and password


You can remove or change the Window's User or administrator's password. You need access to a computer with Internet access to download the Hiren's Boot CD and burn it onto a CD. Then insert this CD into the laptop/computer and boot up the laptop/computer with the Hiren's CD and follow the instructions. There are very useful utilities CD and it a Linux boot CD which contains quite a lot of Utility programs including a password removal program. Click on one of these links to download HIREN'S BOOTCD :- http://www.hirensbootcd.net/ http://67.20.82.163/

Nov 05, 2012 | Routers

1 Answer

Whats my password on my computer


You can remove or change the Windows User oradministrator's password. You need access to a computer with Internet access todownload the Hiren's Boot CD and burn it onto a CD. Then insert this CD into the laptop/computer and boot upthe laptop/computer with the Hiren's CD and follow the instructions. There are very useful utilities CD and it a Linux boot CDwhich contains quite a lot of Utility programs including a password removalprogram. Click on one of these links todownload HIREN'S BOOTCD :- http://www.hirensbootcd.net/ http://67.20.82.163/

Jun 17, 2011 | Routers

1 Answer

I purchased MS home office and student 2007 a few years back. It could be used on 3 pcs. All you needed was the product key code from the disc or from the UPC label on the cd case. I have lost both . I had...


Your somewhat out of luck on that you may have luck contacting Microsoft , but with out some why of knowing you own the product your chances are not the greatest.

It dosen't hurt to try. There phone support is accely quite good now.

800-642-7676 MS support number.

Jun 13, 2011 | Microsoft Routers

1 Answer

My computer is not taking my password


You can remove or change the Windows User oradministrator's password. You need access to a computer with Internet access todownload the Hiren's Boot CD and burn it onto a CD. Then insert this CD into the laptop/computer and boot upthe laptop/computer with the Hiren's CD and follow the instructions. There are very useful utilities CD and it a Linux boot CDwhich contains quite a lot of Utility programs including a password removalprogram. Click on one of these links todownload HIREN'S BOOTCD :- http://www.hirensbootcd.net/ http://67.20.82.163/

Jun 11, 2011 | Routers

1 Answer

I can not get computer to get wireless service from netgear wgr614v10--it says when try to set it up no earthnet cable connected--but it is


1.the prompt is telling you that you wireless isn't set up properly and is prompting you to connect physically via a Ethernet cable.
2. check your user manual for wireless setup ( found on the CD that came with the router).

Mar 16, 2011 | NetGear DG834G Router

1 Answer

Can Linksys WRT54G2 connect between HP desktop with XP and Compac laptop with microsoft 7. Router's program is insalled on desktop.


yes.. do the following:

Go to the control panel and un-install the program that the cd installed. then:
Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.


then restart both computers.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe




Dec 25, 2010 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

Unable to open internet browser from my laptop. Pops up with, "diagnose problem" or, "unable to display"? My router has done this before. But the customer support ran through it so quickly I can't remember...


If you have a flash drive or even a cd-burner, this problem is rather simple.

On your laptop, go to the C drive, Program Files, and the internet browser file. Delete that file.

Then, on your desktop, go to the C Drive, Program files, and the internet there. Copy all of the files under that browser into your flash drive or onto a blank CD. Then take the flash drive or cd out, and copy all the file you just loaded onto them onto the Program Files on your laptop. Then try and open the web browser.

Good Luck!

Jan 31, 2009 | D-Link DI-634M Wireless Router (DI634M)

1 Answer

Net work connections on laptop, it asks for "key" to activate conncection Where do I get this key?


one way is to re set the router and configure it again provided you know the settings..you can backup the router settings before you re set it just in case...

Oct 29, 2008 | NetGear WGR614 Router

3 Answers

I have belkin router f5d7230-4 , but I lost the installation cd... so how can I setup my router without that cd.... can I download the setup from net...


if u r using cable inter net then try this
modem to ur routers inter net or wan port run a ether net cable>and ether net 1 on the router to pc run another ether net cable>and reboot the router and modem automatically u can use it with wired
go to this link to download manual an dpdf
http://www.belkin.com/support/download/downloaddetails.asp?lang=1&download=994

Oct 31, 2007 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Connections


YES> If you will install a router into your network, it will share the internet conenction among the two computers. Both wireless and wired. So the connection will be from

Modem ----> Router (wireless/wired capable)   ------> PCs (two Pcs both the desktop and the laptop

 

and you can also add up another PC if you want to.

Oct 13, 2007 | ASUS WIRELESS ROUTER |WL-520G - RT...

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...