Question about HP Computers & Internet

1 Answer

My monitor says "no input signal" every time I put it on. I have checked all the wires and connections and they seem fine. Any suggestions?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 4 Answers

Starting from the monitor and going to the video connection to your computer, make sure everything is connected and undamaged. If your video card has more than one output, try switching the cable to the other output. If neither is working, and the monitor works fine from a different computer, then its the video card, otherwise its the monitor. But again, before dropping any money on a new monitor, try a different cable, and try switching the cable to the second output if there is one. A video card is definitely cheaper than a monitor.

Posted on Aug 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No input signal on monitor-not connected to tv-computer works fine except for the no input signal


no input or signal means that the monitor is not receiving any signal from the CPU and if the power light is amber then and the cpu works fine then there could be a problem with the cable connecting the CPU and the monitor ...check the cable.

Mar 03, 2014 | Dell Computers & Internet

1 Answer

Loud buzzing when turn on, no input signal


put a song onto play using either tape, vinyl, cd or mp3.

once playing follow the wires from the speaker that doesn't work bending it until you hear it crack or become clear if it does either of those it is the wire between the head unit and the output.

if not you can try attaching the speakers to a different head unit if it doenst work it could be the driver (the cone doesn't have to go to blow a speaker)

Jan 02, 2014 | Mackie MR5-MK2 5" Powered 2 Way Reference...

1 Answer

I have a HP LP20265 monitor, and it seems have problem, with signal detection.


well why not test it on another system
DT or LT
desk top or laptop.

why connect 2 data cables at once, this is SO wrong.
only 1 at a time.

Mar 09, 2017 | HP LP2065 Monitor

1 Answer

I have a HP LP20265 monitor, and it seems have problem, with signal detection.


wow ,, why not test the monitor on any other PC or laptop.
see if its good or bad.?
this is the only way to find this, unless guessing works.

i got lost in your post.
try 2 machines
the post photos of what screen does bad, words never work for telling graphics./

Mar 08, 2017 | HP LP2065 Monitor

1 Answer

HP w2207 no vga input signal, no dvi input signal monitor goes to sleep


There is no signal coming from your PC.
excuse some of the solutions as sounding dumb, but we have to explore all possibilities.

Check the power cable going into the computer
Check the power input disconnect switch on the back of the power supply and make sure it is on
If the pc is plugged into a power bar, make sure it is turned on and the breaker isn't tripped
press power on the PC and make sure the lights are coming on.

now for the solutions that may actually help.

disconnect the power from the PC
if the video is on a card, remove and re-seat the video card
hook the power back up, connect the monitor and try again.

the CMOS on the computer may need to be reset.
I hate totally clearing the CMOS, so what I usually do is remove 1 stick of ram and power up. If the system is alive again, power down, put the RAM back in and power back up.
If that doesn't work, turn the system off, put the CMOS jumper to the CLEAR position for 15 seconds, put it back to the Normal position and then power back up.

Basically, if the monitor works on your friends system but not on yours, the the problem is your system, not the monitor (assuming it isn't working fine til it gets into windows...if that's the problem, you have a driver or configuration problem)

Jun 10, 2012 | HP Computers & Internet

1 Answer

Hello, I'm currently running dual monitors - my main being a samsung syncmaster 2433 and the other being a viewsonic vx2255wmb. I've recently switched the viewsonic over to DVI, it was fine then...


Have you tried changing the input on the monitor? I've seen many times where people go all through the troubleshooting steps on monitors but forget to check that. Look for a button on the monitor that says "Input" and/or go through the menu and find the input section and make sure to check all of them, just in case.

Sep 08, 2011 | ViewSonic Computers & Internet

1 Answer

The monitor is black with a error message :input signal out of range We are connected to a Mac Mini This problem seemed to happen after the monitor was accidently disconnected and then when it was...


Can you please get me the make and model of the monitor? Also did you check to see if the refresh rate of the monitor matches with that of the mac mini?

Nov 21, 2010 | Hannspree Computers & Internet

2 Answers

No input signal on monitor after changing resolution


Hi,

While booting press F8 , Go to safe mode and change the screen resolution and reboot the system.

Hope this helps
Siju.D

Nov 12, 2009 | Compaq Evo D500 PC Desktop

1 Answer

No Input Signal


Dont Panic it is Nothing...
Your Monitor is safe...
If it say "no Input signal" - "Check VGA cable"

it means that the Monitor is finding signals from the computer,and the cable is either not connected or unsecurely connected.

Jul 18, 2008 | Chi Mei Corporation 221A Monitor

1 Answer

Monitor Display Problem.


The first Polyview has a power supply problem (a short) and locks out the power until it is unplugged. You need to check the voltages inside the Monitor to determine which component/s are faulty. I hope you know electronics if not leave it to the repair shop because you have neither the skills or equipment to repair it. By the way I am not a monitor repair man but I do have 30 plus years in the electronics field.
The second monitor may have a broken wire in the cord that goes to your computer. Other internal components can cause the same simptoms your seeing. Good luck!

Mar 28, 2008 | Polyview V17E 17" LCD Flat Panel Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...