Question about DVD & Blu-Ray Players

Open Question

Black and white pictuture only on my Pioneer XV-DV55

I have bought a new LCD Sony KD32P3020 TV and when I connected my Pioneer XV-D55 Cinema System using the Tech+Link interconnect S-VHS cable I can only get a Black and white picture.

The pioneer does not have any scart connections on it to connect sccart to scart, the cable worked fine on my old Panasonic flat screen tv.

Any suggestions?

Thanks Alan Patterson

Posted by on

  • XxMAPxX May 15, 2008

    Yo i have the same problem when i turn it on and when it gets to the main menu it is in black and white but it works and everythin. Also 2 days ago i turned it on and it had color and then when i turned it off to leave (like 10 min) and when i got back to my house it was black and white again.Please help me too.Please i beg

  • XxMAPxX May 15, 2008

    Yo i have the same problem like when i turn it on and it gets to the main menu it is in black and white but it works and everything. Also a 2 days ago i turned it on and it was in color then i had to leave to the store, and i was there for like 10 or 5 min and when i got back i turned it back on and it was in black and white again.Please tell me how to get the color back or how to prevent losing the color again.Please help.



×

4 Suggested Answers

SOURCE: I need a ac power

I need the ac charger for Audiovox portable DVD Player D1812

Posted on Nov 04, 2008

techjuli
  • 157 Answers

SOURCE: How to multi region my Pioneer XV-DV55

Most have "hack codes" but yours is in a select group of a few that simply cant be done with a couple pushes of a button.

As far as I am aware the only way to get thesemachines to play Region 1 discs is to have them chipped. A variety of solutionsare available, and it needn't be expensive (typically £30 to £70) but youshould be aware that any internal modifications to your players wouldinvalidate the warranty. Have a look at the following web sites for moreinformation:http://www.techtronics.com/uk/shop/50-000-dvd.html
http://www.maxking.co.uk/dvdmod.htm
http://www.dvdchips.co.uk/

I know you were looking for a free solution you could do in a matter of seconds and sorry it didnt work out that way. Regardless, I hope I pointed you in the right direction and feel free to ask if you have any more question.



Happy Holidays,
TJ




Posted on Dec 15, 2008

  • 4 Answers

SOURCE: for the pioneer dvd tuner system xv-dv55 what is

the dvd player, speakers etc take their power from the subwoofer.

Posted on Apr 19, 2010

  • 1 Answer

SOURCE: dvd player only plays in b&w, and connectors dont seem to match up with tv

SWICTH TO PALSECAM/NTSC

Posted on Jun 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No sound from front center and rear speakers on my xv-dv55


Hi
1st check your cables are inserted into the subwofer (which is the powersource)
however it sounds as though you have switched the player to mono mode to reset it try this
2. On your remote press the system button with the green ring around it 3. Then press the dts button (number 7) keep pressing it until the auto option appears (watch the little black display screen)
hope fully that should fix it
I am assuming that you no longer have the manual other wise you would have checked in there? But if you do and this does not work try read the first few pages on setting up the sound for your system.
Lou

Apr 05, 2010 | Pioneer DV-340 DVD Player

1 Answer

Hi!My name is Dan,I am from Romania.I have a dvd player Pioneer XV DV55 and I dont have power supply.Can I make my self one?


Yes no worries, you simply need to get the Voltage, Current & Polarity right, this should be marked somewhere usually though, it is Plus +, to Center Pin, with Negative -, on the outer. Mostly 9 - 12 VDC. The Current MUST be over an Amp. A switched Mode PSU would be best, transformer supplies my not provide "Clean" enough DC. Check it out carefully you should have no worries.

Feb 15, 2010 | DVD & Blu-Ray Players

1 Answer

For the pioneer dvd tuner system xv-dv55 what is its power source?


the dvd player, speakers etc take their power from the subwoofer.

Jan 14, 2010 | DVD & Blu-Ray Players

1 Answer

How to multi region my Pioneer XV-DV55


Most have "hack codes" but yours is in a select group of a few that simply cant be done with a couple pushes of a button.

As far as I am aware the only way to get thesemachines to play Region 1 discs is to have them chipped. A variety of solutionsare available, and it needn't be expensive (typically £30 to £70) but youshould be aware that any internal modifications to your players wouldinvalidate the warranty. Have a look at the following web sites for moreinformation:http://www.techtronics.com/uk/shop/50-000-dvd.html
http://www.maxking.co.uk/dvdmod.htm
http://www.dvdchips.co.uk/

I know you were looking for a free solution you could do in a matter of seconds and sorry it didnt work out that way. Regardless, I hope I pointed you in the right direction and feel free to ask if you have any more question.



Happy Holidays,
TJ




Dec 15, 2008 | Pioneer DV-340 DVD Player

1 Answer

I need a ac power supply cord for a pioneer xv-dv55


I need the ac charger for Audiovox portable DVD Player D1812

Jul 22, 2008 | DVD & Blu-Ray Players

2 Answers

Pioneer DV 266


To solve "progressive mode" or any other problem on DV-266, just reset all setting to default, as follows;
Using buttons in front panel (not from remote control); - Switch off your DVD Player. - Press & hold STOP button, and press STANDBY/ON (power) button.
Good Luck & enjoy your Pioneer again.....

Apr 23, 2008 | DVD & Blu-Ray Players

1 Answer

I bought a XV-N650 dvd. When I plug it in, I only see the picture in black and white. I think the connections I've made may be wrong, though they seem to follow the instructions in the manual. Any idea on...


I think ur system link was set up wrong which means that you have to click menu on ur dvd played click on setup and click color instead of black and white!!!

Apr 06, 2008 | DVD & Blu-Ray Players

2 Answers

Dvd player only plays in b&w, and connectors dont seem to match up with tv


I had this problem too. I had to use the cables that have red white and yellow and the back of the dvd player had red whit yellow but also had another set of red blue and green. I had to hook white to white,yellow to green and red to blue and it fixed it. Hope this helps

Sep 09, 2007 | DVD & Blu-Ray Players

2 Answers

No Colour


what is a jvc xv player? how about if u connect ur tv to a cable program, does it give u the same problem? if not, ur xv player is not compatible with ur tv or tv needs to configure setting and also that means ur tv is ok. if yes, there is a problem in the color circuit of ur tv. have it check by a serviceman. but if its not economical to do it, just buy a new one.

Jan 15, 2007 | JVC XV-N312

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96627 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...