Question about Zanussi ZWF1430W Front Load Washer

2 Answers

Zanussi ZWF 1432 washing machine

Why should it take 2.1/4 hours on "normal" wash and 1.3/4 hours on "half wash" - it seems very excessive.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The previous solution posted is correct, but the answer is use a good powder/liquid and try washing at 30 degrees. Modern detergents work well at lower temperatures. You will be surprised how much faster it works. This problem occurs with modern machines that only have a cold water feed and no hot water feed, so everytime it empties and refills it has to wait on the water heating again.

Posted on Oct 02, 2008

Because theres more water it takes a lot longer to heat.

Posted on May 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zanussi progress 1200


check the filter for blockages

May 01, 2014 | Washing Machines

2 Answers

Zanussi washing machine ZWF 14581 error code 43 is showing up. How can I reset the machine so that it works normally?


Hi from retired Englishman in SW France,

Zanussi code 43 states 'problem with the door interlock triac', sorry- likely service call ;-0(
Good luck
John C.

Oct 08, 2011 | Zanussi ZWF1430W Front Load Washer

1 Answer

Noisey drum, can bearings be replaced on zanussi zwf 1421 w


Yes they can. Search for a service manual for instructions, on the net. Parts are not usually exspensive, Repairmen are. I did mine in less than an hour.
Andy

Nov 09, 2009 | Zanussi F1045W Front Load Washer

1 Answer

My problem is the machine makes a noise as if a piece of cardboard is rubbing at one particular point each revolution of the drum it has now become quite loud on my zanussi zwf 1632 w can anyone help ?


I may just be lucky or it might just be temporary but the fault has cleared on my zanussi zwf 1632 w. washing machine thanks for the offers of help if needed in future i will certainly contact FixYa."Bill 34"

Sep 19, 2009 | Washing Machines

3 Answers

Zanussi zwf 1432 front loader


check the filter down on the right and cleane it

May 28, 2008 | Zanussi ZWF1430W Front Load Washer

4 Answers

Zanussi zwf 1432 w washing machine


pcb as the signs were that the pcb was stuck in a programme and unable to change. Anyway, long story short, to fix it:
Take the lid off the washing machine (2 screws at the back) *unplug first
Locate the pcb, unscrew and lift above the washing machine with all wires in tact.
Locate the wires that are coming out of the back of the "program" board, it should be 2 blue wires.
Follow these back to the pcb and unplug
plug in washing machine
Turn on washing machine
Only the on/off light should come on
Whilst on, and being careful, plug back in the wires you unplugged
VOILA, fixed washing machine!!

Right, have to go, got a weeks worth of washing to do!!!!

Feb 24, 2008 | Zanussi ZWF1430W Front Load Washer

Not finding what you are looking for?
Zanussi ZWF1430W Front Load Washer Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...