Question about John Deere Garden

1 Answer

Trying to change the blade belt on my john deere gx75 lawn tractor and can't can someone help me through this?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

Get in touch with your common sense. You have the deck out from under the mower and you have cleaned it. By chance is there a belt install guide on a sticker on the deck? This is a very common sticker. If you can get on fixya you can Google "John Deere deck belt install" with your model number. Failing all that, look at all the pulleys and the belt itself. The belt is flat on one side and v shaped on the other. Now look at all the pulleys, some have a groove and some are flat. The groove tells you the v of the belt goes in there and the flat tells you it is to take up slack or absorbs shock and the flat of the belt runs touches it. There is but one way it will go. One of the pulleys moves in an arc on a spring loaded swivel, that is your tensioner and will be the last one as you will move the tensioner to get it installed.

Posted on Aug 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a blade belt on john deere 160 lawn tractor


http://manuals.deere.com/cceomview/OMM152793_H4/Output/Index.html
is the link to the manual, where you scroll down and look for replacing the drive belt
hope this helps

May 23, 2016 | John Deere Garden

1 Answer

Sx75 blades will not engage when running it stalls if try to engage blades


with the belt loose, and motor off check for free motion of your actual blades. Sounds like one of them may have bound up. Could be a bad bearing, or that something wedged under the deck. Otherwise, I'd recheck the drive belt to make sure it is routed properly and not binding anywhere at all. Also make sure that all the idle pulleys spin freely.

Oct 13, 2012 | John Deere Gx75 Rx75 Srx75 Sx75 130 9hp...

1 Answer

I have a John Deere rx75. The mower deck seems to be too low when I set it at the highest position. I have no idea how to do that or to level the deck. Please help. The lawn is cutting uneven and its...


find someone who can read and use the internet
go to www.google.com
search for john deere lawn tractors
go to the john deere website and click around under "support" until you find the manuals
download a manual for your model,l but they are all about the same
have the person who can read, read you the part in the manual about adjusting the deck height and how to level it.
there you go, bob's your uncle.

Sep 19, 2011 | John Deere Gx75 Rx75 Srx75 Sx75 130 9hp...

1 Answer

Need instructions for changing a drive belt on a john deere LT155 lawn tractor. When mowing up hill the forward motion is slipping even though i am not loosing traction. if i come off the pedal and start...


I have googled LT155 and came upon john deere LT155 lawn tractor(noncurrent). It took me to John Deere's site. I put in your model number and it had several catagories. I would try the alphabetical list, go to B and look for traction belt.
Good day.

Oct 14, 2009 | John Deere Garden

1 Answer

Have a john deere lawn tractor. Blade will not


Check both belts on deck. Check if the clutch is clicking in. If not it will most likely need a new pto switch.
Sam

Aug 10, 2009 | John Deere Mower Blade 5 each

Not finding what you are looking for?
Garden Logo

Related Topics:

432 people viewed this question

Ask a Question

Usually answered in minutes!

Top John Deere Garden Experts

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Tim Whalen

Level 3 Expert

3072 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Are you a John Deere Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...