Question about Mtd Garden
Sounds like you will need to re-clean your carburetor and reset your float level.
When setting your float level be sure to turn the carburetor upside down and make sure the float is level and not tiliting up or down. This will affect the fuel allowed into the carburetor.
Be sure to use compressed air to blow out all the fuel and air passages.
Sometimes you can get by with priming the carburetor a few times, and letting it run a few times like that and it will flush the gunk out of the jets,but most of the time you will need to rebuild the carburetor.
When you clean your carburetor and remove the jet screws, You will first seat the jet screws and count the number of turns it takes to seat the jets from their original position.
That way when you go to put the jets back in, you know how many turns they were in/out.
Please rate me
Posted on Aug 23, 2010
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 15, 2012 | Briggs & Stratton Briggs Stratton Intek V...
Aug 05, 2012 | Briggs & Stratton Briggs Stratton Intek V...
Jul 12, 2012 | Briggs & Stratton Briggs Stratton Intek V...
Apr 09, 2012 | Briggs & Stratton Briggs Stratton Vanguard...
Sep 30, 2010 | Briggs & Stratton Briggs Stratton Vanguard...
Aug 10, 2017 | Mtd Garden
234 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: