Question about Singer Curvy 8770 Electronic Sewing Machine

2 Answers

When I plug in my Singer Curvy 8770 and turn on the power switch, it beeps and nothing comes up on the screen.

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I don't know if you've resolved your problem but, I had a similar experience with my Singer Curvy today. Turns out the needle was stuck in the left position. I pushed down on the needle threader a few times and that released the needle back into the middle position. I turned off the machine, turned it back on, and everything was fine.

Posted on Aug 03, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,788 Answers

No offense, but have you read your manual? IIt does not sound like it. If, you don't have it go to and download it for free.

Posted on Aug 24, 2010

  • S Ben Jan 11, 2012

    I'm having the exact same problem, read the manual, threaded properly, button hole lever is raised, bobbin lever is to the left, needle manually raised to the top (rotating the wheel towards me), fabric placed, foot lowered, straight stitch selected, put my foot down and beeps, blank lcd screen. switched it off and on again but just turns on and beeps... Anyone got any ideas? this is a brand new machine, first time I'm using it (I am not a very experienced sewer but am not a beginner, however this is the first computerised machine I've used).

  • anitab1
    anitab1 Aug 03, 2012

    I don't know if you've resolved your problem but, I had a similar experience today with my Singer Curvy. It turns out, the needle was stuck in the left position, it was not in the center position. I pushed the needle treader down a few times and it freed up the needle and it moved to the center. I turned off the machine and restarted it and everything was fine.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Singer Curvy has no screen display, won't sew and emits an extended beep.

no screen display could mean there is something wrong with the computer, also you might try changing the thread and needle

Feb 07, 2016 | Singer Curvy 8770 Electronic Sewing...

1 Answer

My singer curvy 8770 keeps beeping and stops I have cleaned it retarded threaded it sews for a minute then beeps then stops continues.this machine is only 3 months old I need some answers

Are you getting any error messages? This page may help:
It would be something really simple like the bobbin winder not completely in the right position. I hope the troubleshooting page will help.

Jan 17, 2015 | Singer Curvy 8770 Electronic Sewing...

1 Answer

Singer curvy 8770 needle wont move

possibly has a broken belt a repair shop might be your best bet

Sep 27, 2017 | Singer Curvy 8770 Electronic Sewing...

1 Answer

Singer curvy beeps twice and quits sewing

I have the same problem and no any solution, someone can help, please.

Mar 05, 2013 | Singer Curvy 8770 Electronic Sewing...

1 Answer

Curvy 8770 won't turn on

here's a link for a free manual

I had other questions about the singer curvy,, check in the manual
to see if it has a hidden fuse.
if it doens't have a fuse, the it could be the power cord or the
on & off switch

Sep 27, 2012 | Singer Curvy 8770 Electronic Sewing...

1 Answer

Singer 8770 beeps twice then stops stitching

do you have a manual?
try a new needle
adjust the top tension
try rethreading the machine top & bobbin

May 16, 2012 | Singer Curvy 8770 Electronic Sewing...

3 Answers

Singer curvy beeps 4 times and stops sewing

when you thread the machine make sure to use every thread guide
check to see if the bobbin is in correctly
try changing the needle--normally flat side goes to the back
the needle that your sewing with is it the right one for the thread & fabric
clean under the needle plate & bobbin area for lint or loose threads

Mar 31, 2012 | Singer Curvy 8770 Electronic Sewing...

2 Answers

I recently rec'd Singer Curvy 8770 as gift. Trying to use for first time and thread on underside of stitches is loose. Have tension on top dial as far as 9. I hve been sewing for forty+ yrs.

Try this, totally rethread with the presser foot up, then pull the top thread, it should move smoothly, then lower the presser foot, now pull the thread, it should barely move. This seats the thread in the tension discs.

Apr 11, 2011 | Singer Curvy 8770 Electronic Sewing...

Not finding what you are looking for?
Singer Curvy 8770 Electronic Sewing Machine Logo

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Cindy Wells

Level 3 Expert

5427 Answers


Level 2 Expert

48 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides