Cannot install win xp

Hi, your will need to delete your windows XP re format that part of your hard drive, then re install XP

go there...select the operating system -download driver -install
restart.
http://www.gigabyte.com.tw/Support/Motherboard/Driver_Model.aspx?ProductID=1951
Hope this works for you

Install the Windows updates including XP SP3, as these are needed.

Your keyboard uses a driver(small pieces of sftware). Windows might have corrupted the driver with no intentions. You can get into safe mode by pressing F8 on some models and you can either restore just before the update or uninstall the knowledge base update that caused it.

1st u say what type of motherboard u use......
open ur xpsp2 then install sound driver
setup ....then cancel then wait ...restart

this is caused because a file of your pc has become corrupt and your XP needs to be reinstalled.

which is the version of xp u have.. i think xp sp2 has the xp drivers or you can manually load the drivers when trying to install xp pressing a f6 key.. for which you must have the floppy disk with the sata drivers from the hard disk manufacturer..

Hi,

Perhaps what is required is to install the drivers separately and use those from the manufacturer, Toshiba. Incidentally, there are 18 versions of a Satellite A65, which one is yours pls? (Versions start from S1062...S1762).

Pls start here and select Portables, Satellite, and A65 + Version, then click on "Show Results" button.

Alternately, you may want to jumpstart and try this for the RTL8139 and/or this for the Atheros WiFi. Both are for Windows XP.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Kindly get me the drivers as i have installed xp in my compaq system. and i want drivers for that

I know this problem, The HDD is a SATA disk, win XP setup cannot identify a SATA controller on it's own you need to load the driver (from a disk) so you may need to download it first. I think this is the correct link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-51521-1&lc=en&cc=us&dlc=en&product=3369431&os=228&lang=en extract the files and burn to a CD or Floppy then run win XP setup by booting from CD you should see in the begining of win XP setup from CD it prompt you to press (I think) F2 to add RAID or SCSI Controllers, (this prompt is at the bottom of the screen) Then follow the propmts to load from the disk you made earlier. you should be able to select the controller from a list. (short list) you should then be able to continue and hopefully Win XP setup should now be able to see your HDD and give you choices about which partition (as per normal) you want to remove all partitions before installing winXP (you can then make whatever partitions you wish) Hope this helps