Question about Televison & Video

Open Question

Tv automatically changes the source modes like av,tc,pc,side av etc

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
thebartman58
  • 4 Answers

SOURCE: The source keeps changing automatically

this does seem to be a heat issue,

Posted on Nov 28, 2007

Ad

SOURCE: Tevion 19 LCD TV Model Number 1961HDT

eh, that should be 0871 663 1540

Posted on Jun 25, 2008

ekcnoel
  • 998 Answers

SOURCE: My philips 32 inch tv is acting like it is

the tack switch is already corroded try to use a contact cleaner or replace it. it has already a resistance.

Posted on Oct 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to change pc mode of sharp into tv mode


Use the input selector to change back to TV. Usually the first input on the list.

Jun 26, 2014 | Sharp LC-32SB24U 32 in. LCD TV

2 Answers

32" samsung hdtv flat panel: switches when you don't want it from tv to av/pc or av to tv/pc.


Sometimes, TVs will switch to a new input when they sense a new signal on the new input. So if you're watching TV and someone turns on the AV device (or makes a change that alters or starts a video signal), the TV may switch over to that signal. This is a function of the TV. Some TVs allow you to disable this function, others do not. I looked in the manual and didn't notice where this could be enabled or disabled. If you want to only watch one source, make sure the other sources are turned off.

May 14, 2014 | Samsung LN32A330 32 in. LCD TV

1 Answer

Program locked


have you perhaps changed the settings with the remote?
if it wont change with either the remote, or the side buttons.(ie the source button) then perhaps its been disabled by going into service mode, or perhaps a defective main av board

Dec 09, 2013 | Sansui HDLCD-2200 22 in. LCD TV

1 Answer

No picture just av1


If the cat sat on the remote, it is likely it changed the tv to AV1. Just find the AV button on the remote and press it again and again. It should cycle through the different AV channels your TV has - my TV has 6 AVs, 2 HDMI and a PC channel so if yours is anything like mine, you may need to press several time to get back to your Sky/freesat/virgin box. Alternatively, some HDMI connected kit just needs turning off and on. That then sends a signal to the TV which changes the TV automatically. For example, my Blu-ray player does that.
Experience - I have a cat that sits on my remote and does the same thing!!

Jul 31, 2012 | Panasonic 37" VIERA Full HD 1080p IPS LED...

1 Answer

I have a small magnavox HDTV. I unplugged it to watch it in another room. The next day when I moved it back into the living room I turned it on. Every time I try changing the channel it changes the source...


Is it a multi-function remote? If it is, make sure you've punched the TV button before using it. Also, make sure none of the buttons on the remote or the TV have accidentally been pushed down and are stuck.

Jul 05, 2011 | Philips Televison & Video

1 Answer

AT NIGHT, TV SWITCHES ON AUTOMATICALLY AND CHANGES FROM SIDE AV TO OTHER OPTIONS, I.E. PC / HD 1 ETC. LAST NIGHT TV SWITCHES ON, CHANGED TO HD1 AND TURN VOLUME AUTOMATICALLY TO 0. CAN'T GET VOLUME UP. WHEN...


what you describe is almost impossible ..the only explaining is someone with a compatible remote control messing around with you ..so ...pay attention ..and after that if you are completely sure that this is out of case...Leave a comment and I will search for another possible cause ..

Mar 17, 2011 | Philips 42PFL5332D 42 in. LCD Television

1 Answer

I'm having problems with the settings on my Canon EOS 400D. When I take pictures in AV mode I can get quality pictures but in TV or M modes the pictures always come out so dark even when taking them...


You need to understand the relationship and teractivity of aperture, shutter speed and iso. In Av mod, you choose the aperture and the camera makes thw shutter speed agjustment, In Tv mode, you set the shutter speed and the camera makes the aperture adjustment, In manual, you have to set both shutter speed and aperture manually. If the ISO mode is set to AUTO, the camera chooses the sensors sensitivity to light automatically. Change to specific ISO
(200-400 for daylight and 799-1600 for night). Take a picture in AV mode and note what shutter speed the camera chose. Then switch to TC mode choose the same shutter speed and see if camera chose the same aperture(f-stop) you chose in first shot. Change to Manual and choose same f-stop and shutter speed the camera chose for you in the other modes. Compare all three photos. They should be almost if not exactly the same exposure wise.
In Tv mode choose a dlowers shutter speed, In Manual choose a combo of slower shuuter and wider f-stop(smaller number). Read your manual.

Jan 02, 2011 | Canon EOS 400D / Rebel XTi Digital Camera

1 Answer

Hi i have an alba tv , im trying to connect a dvd player. I have connected the scart leads etc.I can not get onto the av channel so i can watch a dvd. Please help


Hi,

Firstly, please make sure you have connected the SCART cable correctly. This should be connected to a SCART OUT socket on the DVD player to one of the SCART IN or EXT sockets on the rear of the TV.

If you have correctly connected the SCART cable the TV should automatically switch to the AV channel when you switch the DVD player power on or insert a disc.

Switch your TV on, then switch the DVD player off and then on again. If the TV does not change to the AV channel you may have the SCART cable connected incorrectly.

Not all TVs automatically switch to the AV channel when the AV device is switched on. On some TVs the AV input is on channel 0 or 99. On other TVs the AV input is not assigned to a specific channel. On these TVs you need to look for a button marked "AV", "INPUT" or "SOURCE" - either on the TV remote or on the buttons on the front of the TV. The easiest way to do this is to insert a disk into the DVD player and start it playing. Then press the "AV" "INPUT" or "SOURCE" button (whichever one you have) repeatedly until you find the signal from the DVD player.

Please check your connections and try using the "AV" "INPUT" or "SOURCE" buttons. If you are still unable to watch your DVD player, please post back with the following information:

1. Model number of the Bush TV
2. Brand and model number of the DVD player
3. If you are using any remote other than the ones supplied with the TV or DVD player, the brand and model number of the remote.

I will then be able to tell you exactly how it should be connected and which buttons (if any) you need to press to access the AV channel.

Hope this helps. Happy New Year!

Regards,
BElectric

Jan 01, 2011 | Televison & Video

1 Answer

My toshiba satellite l510 cannot connect to an epson lcd project.. even if all cables are properly connected


1. Unplug all the connection cables.

2. Plug them again properly.

3. Press "Function Key + F5" to enable the External Display Output.

4. Change the display mode of your projecter to 'TV/AV' or 'PC' mode.

5. If still the connection is not possible, reinstall the display/video driver on your system, and restart the system.

tell me if this trick not works...tc! :)

Jan 06, 2010 | Toshiba Computers & Internet

1 Answer

Screen is dark


AV/TV Button
Press ¡° AV/TV¡± button,the will be some word show on the right top
of the screen, press ¡° PROG+/-¡± to select the AV source, and then
press ¡° VOL+/-¡±to enter AV mode.
TV
PC
SCART
http://www.denver-electronics.com/UploadetFiles/154/25/DFT-1504_Black_English.pdf
The Tv is starting or going into PC mode Or scart mode set to TV mode. Hope this helps Please rate me. The link is to all of the setting for the TV. Blue light is pc led.

Dec 21, 2008 | Hisense LCD1504 15 in. Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74243 Answers

Cindy Wells

Level 3 Expert

5126 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...