Question about Kenwood DNX8120 DVD Navigation Receiver Car Video Player

1 Answer

The hard buttons in the uknit stopped working. How to fix?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I have to same problem. Whenever someone hits the "vol down" hard button... the hard buttons will stop working for a few days. Then they will work again until someone presses "vol down" again. Then they will stop working. Any idea why?

Posted on Sep 11, 2010

  • blakely_k Sep 28, 2010

    same here, just out of the two year warranty. is this isolated to just the hard buttons or can i expect something else to start to go next? i figured the soft buttons and hte remote still work so i'm not sure i'm going to send in to kenwood for a repair.... any help is greatly appreciated.

  • woodgrain816
    woodgrain816 Sep 28, 2010

    I figured out on mine that if I press the "problem button" again, all of my hard buttons will start working. So if my Vol Down button gets pressed too hard, I just have to press it again in order for the unit to function properly again.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix my power button on iphone 4s


Have you tried a hard boot? Hold both the power button and home button for about a minute until you see the reboot apple logo.

Nov 27, 2013 | Cell Phones

Tip

Jvc dvd and vhs combe hard reset fixes loading issu's and more


if you have any jvc dvd and or dvd , vhs combo and you have error codes or loading issue's a hard reset may fix this issue and is the step you should always preform before sending it in for service or giving up on it.

a hard reset is done by simply holding the power button and stop button at the same time until the unit turns off. turn unit back on and it will go back to base settings.

if this does not fix your issue service is required.

on Feb 12, 2010 | Televison & Video

1 Answer

Will my key stop working?


Very much so I'm afraid. Make sure the spare is available.

Dec 03, 2012 | 2009 Mercedes-Benz C 300

1 Answer

DSi - my 'L' button stopped working.


Try pushing very hard from top and bottom.

Jul 05, 2010 | Nintendo DS Console

2 Answers

Kenwood DNX8120: Hard Buttons Stopped Working


so does anyone know short of sending the unit by to kenwood?

Dec 30, 2009 | Kenwood DNX8120 DVD Navigation Receiver...

1 Answer

My odometer stopped counting. All of my other gauges work. Does anyone know how I can fix it? Thank you My odometer stopped working too. But the speedometer still works. I'm getting help on the...


sometimes you can pull on the reset trip button if you have one and it'll start woring again need to do this while driving so be carfull dont pull too hard it'l be brock worse. a junkyard speedo will bolt right in. but not after 93 model

Jun 02, 2009 | 1990 Dodge Ramcharger

1 Answer

My Trigger Buttons don't work!!


This has happened to me as well. I wasn't able to find a fix, but as you've only had your DS for half a year, it's still under warranty (12 month standard on all Nintendo consoles,) so I would recommend sending it in for repairs. You can set up a repair order here: http://www.nintendo.com/consumer/repair/dslite_system.jsp?region=USA&is=s3O

It shouldn't take too long, when I sent mine in on a tuesday afternoon, it was back by friday.

Hope this helps.

Jun 04, 2008 | Nintendo DS Lite Console

1 Answer

Transport STOP Button


switches are sealed, need replacement. faders can be cleaned, use de-oxit, good stuff!

Jun 03, 2008 | Tascam 2488 Portastudio Multitrack...

1 Answer

Treo 755p phone audio stops working


try doing a hard reset just make sure you hotsync first so you can backup all your information. Always keep in mind the software you have loaded write it down and the website you got them from along with any registration codes. when doing a hard reset you will lose all the information and programs on the phone basically it will take you back to the way you first bought it.

How to Hard Reset a Treo 755 To perform a hard reset/clean wipe of a Treo 755, do the following:

1. Remove the battery cover from the back of the device.
2. Press and hold the power (red phone) button.
3. While holding the red power button remove and replace the battery from the device.
4. When you see the "Access Powered" screen on the device take you finger off of the power button. At this point, you'll be prompted to erase the device by pressing up on the directional pad.

Good Luck I hope this helps with your problem

May 27, 2008 | Palm Treo 755p Smartphone

5 Answers

HTC TyTn front buttons not working


Same problem...
Bet it's a software glitch

Mar 06, 2008 | HTC TyTN Smartphone

Not finding what you are looking for?
Kenwood DNX8120 DVD Navigation Receiver Car Video Player Logo

Related Topics:

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4836 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...