Question about Westinghouse Refrigerators

Open Question

Fridge model no bj504 cm-rstoped working ihave turned a white knob a halve ml clock wise at the botomleft hand corner at the back of fridge fridge started working .

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mikedurland
  • 481 Answers

SOURCE: whirlpool ultimate care ll washer

on the back of the timer is a black plastic tab, you have to pull out on this tab in order to remove the knob. in other words you have to take apart the control panel to get to the timer just to take off the knob. :I

Posted on Jun 28, 2008

Ad
larryyb
  • 291 Answers

SOURCE: dryer drum won;t turn

you have a bad motor / sorry to tell you but thats what your looking at / larryyb

Posted on Dec 05, 2008

  • 57 Answers

SOURCE: Agitator locks up

The agitator is supposed to turn freely one way then catch the other. in the top of the agitator there is three teeth that retract when you go counter clockwise and then when they go clockwise they come back out to bite on the inside of the agitator and then spin it. Those teeth are called DOGS. It is only when you can spin it freely both ways that you have a problem. There is nothing wrong with it. Congrats.

Posted on Jan 04, 2009

ZJLimited
  • 17970 Answers

SOURCE: My ChefMate mini fridge is

Start with the warm refrigerator flowchart and let us know where you git: Warm-Refrigerator-Troubleshooting

Keep us updated.

Posted on Jan 31, 2011

americomacie
  • 1 Answer

SOURCE: whichever direction I turn the

There's a endless volume knob who has contacts to inform if the volume increase or decrease.
It's normally produce noise and the circuit understand it like a data.
You can put a 1uF/50V capacitor in the each of 2 soldering points of the volume control to the ground (there has 3 points. One is ground and the others are live).
Best regards

Posted on Feb 25, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer not agitating,spining,motor turns but will not turn belt,the belt gets hot an melts.Replaced belt,lid switch works ok, I can manually turn agitator in clock wise direction but not counter clock...


Need model number! Do a google search for a manual (just search by model number). Repair parts and some troubleshooting help at: http://www.repairclinic.com/

Jan 16, 2014 | Washing Machines

1 Answer

Dodge viper interior lights


Hear come a dumb question have you tried turning the knob on the light switch ? What I mean is the if you turn the switch counter clock wise the interior light will come on and will not go off untill you turn the knob back clock wise. Hope this helps.

Nov 27, 2013 | Ford Cars & Trucks

1 Answer

Drain pump not draining water


You will need to check the drain filter for obstuctions, bra wires,coins hair cilps etc. You will need a low tray to catch the water, there is a front flap that pulls open on the bottom front corner of machine. Find the small black rubber tube with a white stopper, unclip and gentally pull it out of machine, unplug and drain water into tray, this will take some time unless you can move the machine outside to drain,that means removing the knob next to the rubber tube, unscrew. anti clock wise, watch out for a flood of water . if something is jammed you may have too pull on the knob . Only goes back in one way. Reverse to put back together.

Jun 13, 2011 | LG WM-3677HW Front Load Washer / Dryer

1 Answer

I have a instantaneous water system 10H Hydropower ...did not get a manual when installed....I need to have hotter water as it's winter and the water is like warm...not sure what to adjust...opened...


take the cover off the 10 h unit light up the burner by turning on the tap turn the water flow tap on the front of unit (white knob) clock wise slowly feel hot water pipe coming out off unit when temp increases put cover back on check temp at sink if too hot turn knob anti clock wise

May 23, 2011 | Bosch Water Heaters

1 Answer

Hitachi model 50vs810 is blurry when you turn it on then clears up after about 45 minutes to an hour


Hi,
Just open the back cover of the HDTV and look for the black plastic transformer with two red wires it is the plyback transformer there is two little knobs one for the screen and the other one is for the focus. Just adjust the focus knob either clock wise or counter clock wise its depends on what the effects in you pictures if nothing happens, then it is the convergence IC problem, need to replace.
Feel free to ask whatever the result.

Regards:
votit

Feb 08, 2011 | Hitachi 50VS810 50" Rear Projection HDTV

1 Answer

Brother ml100 standard - eraser tape will not erase, nor will it rotate to more tape. There is sufficient tape on the roll. Thank you


do you have it past the leader ( the red part)? there is a sticky place just before the actual corr. tape starts. you need to pull this loose before you put the tape on. it should turn counter clock wise. the tape should all be on the round spool, not the spool with the knob. if this info doesn't help - let me know. never seen the corr. tape stick so that you can't turn it by hand.

Dec 24, 2010 | Brother ML-100 Typewriter

1 Answer

I have a quartz president wall clock, I changed the battery and set the time OK but the chime needs setting and I have no instructions as it is a very old clock


These are general quartz wall clock instructions as I dont know enough about what type/style of clock you have.
  • Open the access door to the dial and hands of the clock if required. Some battery-operated clock movements are sealed inside the clock case with a back panel that is screwed in place. To gain access to the hand set knob, remove the back panel screws using the appropriate tipped screwdriver.
  • Turn the minute hand (or turn the hand set knob at the rear of the movement if access is available) carefully counterclockwise or clockwise until the correct time is reached. Keep in mind that using the hand set from the rear would require turning the knob in a clockwise direction in order for the hands to turn counterclockwise.
  • Move the hour hand carefully with your fingers near the center of the hand to the hour that the clock is striking if the striking chime is not counting the correct hour. The hour hand is a friction fit hand and will move without engaging the minute hand.
  • Replace the back panel and tighten the screws with the screwdriver if removal of the back panel was necessary to access the hand set knob.
  • Close the front access door if required.
  • Aug 15, 2010 | Watches

    1 Answer

    Top half fridge not cold freezer department fine


    I had the same problem; the top fridge compartment was warming up to 14C while the freezer compartment was starting to defrost (frozen stuff was starting to become soft. I took the rear wall off the freezer compartment and found it all iced up. I defrosted it with a blower heater then powered it back up. It all worked fine for a month when the same thing happened. I figured that the defrost cycle wasn't working. I located the defrost timer on the rear right-side of the fridge. I rotated it several times and found that the fridge was turning on and off. I rotated it until the fridge turned off. I waited 5 minutes then stuck my head into the freezer compartment and felt the rear wall at the bottom where he drain is; it felt warm so I guessed the defrost heater element was ok. I ordered a defrost timer and installed it. I haven't had a problem since.

    Nov 09, 2008 | Westinghouse Refrigerators

    1 Answer

    Our Amana side-by-side model SXD524VW (Belgium supplied and installed)stopped working. Lights still work. Some light noise (compressor?) can be heard. But it is warming up. Icleaned all out. It was really...


    HI thanks for your question. that little black box is the defrost timer. turn that knob till fridge starts up. and replace the defrost timer. thanks the appliance doc. please rate my answer. thanks

    Oct 12, 2008 | Amana Refrigerators

    Not finding what you are looking for?
    Refrigerators Logo

    Related Topics:

    76 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Westinghouse Refrigerators Experts

    Charles T Nevin
    Charles T Nevin

    Level 3 Expert

    4066 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    John Tripp
    John Tripp

    Level 3 Expert

    4654 Answers

    Are you a Westinghouse Refrigerator Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...