Question about Bushnell .22 Rimfire 3-9x32 Rifle Scope Matte Multi-x

1 Answer

The is on a 270 it still shooting to the left and there is no more adjustment

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,702 Answers

The scope mounts are no good then,,,,,but you could try this,,,
cut up 3 bits of 35mm camera film so they will slide behind the scope mount undo the rear scope mount cap (eye end) and slip the film strips into the right side of the mount so they push the rear of the scope over to the left hand side of the mount (as you look at it from the **** end) then nip up the mount cap bolts,,,
this will move the point of aim well over to the "right" some thing like 4-5 inches at 100yds if this still dont line you up,,,
change the scope mounts

Posted on Aug 25, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to just read sights on my tanfaglio .45 . It is shooting low and slightly left.

In the case of a non-user adjustable sight, any adjustment should be entrusted to a qualified and experienced gunsmith, though few hand guns are superbly accurate and part of the skill of using a hand gun is to compensate for sight inaccuracies - knowing it shoots low and left then aiming high and right by the right amount is what it takes...

May 27, 2017 | Optics

1 Answer

As all tamron lenses i used. it stops working in the middle of shooting!!?

I know this is a shot in the dark, but have you cleaned the afore-mentioned contacts, both on the lens and the camera, using s clean dry lint-free cloth ?

Jan 27, 2016 | Tamron Af 18-270 3.5-6.3 Di Ii Vc Lens For...

2 Answers

My rifle is shooting about five inches high. Do I turn the elevation adjustment towards "up" or opposite of "up"?

If you have a scope, the adjustment is under the top cap, and you should turn the adjustment 'down'. If you have iron sights, you would adjust the rear sight in the same direction that you want to move the bullet on the target (also 'down'). The opposite is true if you are adjusting the front sight.

Dec 26, 2014 | Optics

1 Answer

How do i adjust headlights on a 2002 mercedez benz 270 cdi

There are two adjustment screws on each headlight. One will adjust up and down, the other to left and right.
You can identify them alongside the headlight unit, some have a spring around the screw thread to tension the screw.

Oct 21, 2014 | Cars & Trucks

1 Answer

How to adjust height on rear springs

adjusting the spring tension makes the ride harder and mite hold you up slightly ! is the adjuster on the top of the shock and rotates by hand coz thats the oil reaction responce , or is it below the spring which you need a tool to adjust ? if suspension is nearly full compressed after all these then fit longer shocks ! Dial a ride air shocks are good as you can select the height , not cheep though ! P...

Dec 21, 2013 | 1987 Honda VT 1100 C Shadow

1 Answer

I have been given a olmpus fe-270. It was bought in china so has chinese on the display menu. Can i change it to english please

From either the Shooting or Playback mode, select the Setup menu (the wrench and hammer icon). Select the talking head (should be the fourth item). From there you can select the language for on-screen display. Be aware that available languages depend on where you purchased the camera, so English may not be available.

Jul 10, 2010 | Olympus FE-270 Digital Camera

1 Answer

VX-III 1.75-6X32MM. While zeroing for the fist time, I had to adjust the scope up by 10 clicks because it was shooting low. After the first adjustment, it was still shooting low. When I went to adjust...

cross hairs stick some times try taping the top after each adjustment if that don't work turn your scope so the left to right adjustment is on top and use it to raise and lower point of aim.

Jul 10, 2009 | Optics

Not finding what you are looking for?
Bushnell .22 Rimfire 3-9x32 Rifle Scope Matte Multi-x Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bushnell Optics Experts

Joe Lalumia aka...
Joe Lalumia aka...

Level 3 Expert

3186 Answers


Level 3 Expert

102366 Answers

Mark Campeau

Level 1 Expert

44 Answers

Are you a Bushnell Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides