Question about Vizio L37 Television

1 Answer

Visio Emblem is yellow. TV will not power on.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

Unplugging it from the outlet for about an hour to let it reset itself first, if it still does not work then It may be in the safety shutdown mode due to short circuits in the power supply or in the backlight inverter board, you can try disconnecting the power cables to the backlight inverter board to see if you can get the TV to come back on with sound but no pictures.

If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps

Posted on Aug 22, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Visio VX32L has a black screen, appears to power on but picture.


Any swelling on a cap is bad sometime you wont see swelling ontop sometimes its on the bottom, I suggest replacing those caps then try again make sure you discharge the caps as well.
Also make sure its the right caps too!

1000uf 6.3volts or something like that. Ebay a good source for caps and amazon.

Dec 15, 2015 | Televison & Video

1 Answer

For about a month when I press my vizio on switch the tv would click on the vizio emblem would light up,then it would immediately click off and the emblem would go dark...I would have to repeat this...


unplug the TV. Press and hold the power button for 30 seconds, repeat. Plug it back in and try again.

More troubleshooting can be found at www.vizio.com

Apr 22, 2011 | Vizio L32 32 in. LCD HDTV

2 Answers

My Visio 50" Plasma Model#


Have you removed the back and looked for Bad Capaciotrs on the power supply board?
Capaciotrs will be vented or puffed up on Top. 1000uf 16v,2200uf 10v 3300uf 10v etc....

Feb 17, 2011 | Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

My Visio 50" Plasma Model# VP504FHDTV10A was purchased in June of 2008. Recently when I try to turn it on, it makes a click sound and then the Visio emblem turns a dull amber color and the TV will not turn...


I just solved this kind of problem with my VIZIO VP504FHDTV10A. It was main power supply that went bad. You need to open back panel cover and right in the middle you will see two powersupply boards(subpower board(smaller) and big main powersupply board). Just get board part/model # and search it on eBay(what I did). It was approx. $100. Good luck.

Oct 06, 2010 | Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

HOW DO I HOOK UP MY VCR TO MY VISIO TV AND WHAT CHANNEL DO I PUT ON MY TV?


if you connect the vcr in rf plug put the tv in channel 3. if you conct with the yellow, red and white cable put your tv in video 1.

May 14, 2010 | Televison & Video

1 Answer

P42HDTV Visio Plasma TV. The picture is bad grainy/snowy.


Doing some warranty work for Visio, I ran into this same problem. I replaced the video and power boards, among other things. Turned out to be a bad panel, which isnt viable to replace. Best to get Visio to agree they made a lemon (as all their products are in my humble opinion) and have them send you a new tv, or even better, buy a tv that is NOT a visio. You can get great deals on LG and Samsung these days, both decent quality tvs.

Sep 02, 2009 | Televison & Video

1 Answer

Visio 42" 1080p wont power up


Sounds like the power supply section in your tv has a bad component. Probably a bad capacitor or a surface mounted diode. One thing is for sure: something has shorted and is causing your power supply section to not fire up. Suprising to me because Visio has a good track record.

May 22, 2009 | Vizio VW42LF 42 in. LCD HDTV

1 Answer

Trying to hook up a Visio 42 inch TV to my dishtv


the cables are for, sound, video. yellow is video. my daughters tv did this also. we had to junk it no one carries parts for Vizio. i would call the store and take it back, something got knocked loose during the transaction between the store and your house.
Good Luck

Aug 14, 2008 | Vizio P2 42 in. HD-Ready Plasma Television

2 Answers

Visio TV and Direct TV remote


I bought a 42" Visio LCD from Costco and used code 10030 and it worked. It is the code for Goldstar TV.

Nov 17, 2007 | Televison & Video

Not finding what you are looking for?
Vizio L37 Television Logo

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74666 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...