Lost picture and sound power red light flashing. Cannot turn of power with
remote or on console. Unplugged power. Plugged power back on, no picture but sound came on for about 10 seconds the lost. Power red light
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
SYSTEM RESET If the TV will not respond to either the remote control or the front panel controls and/or will not power Off, press the SYSTEM RESET button with a pointed item like the end point of a paperclip. The TV will turn Off and the TIMER light will flash quickly for about one minute. When the TIMER light stops flashing, you may turn on the TV again. Changes you made the last time the TV was On before you used the SYSTEM RESET button may be lost, however, the changes you made previously are not lost. POWER/TIMER Indicator The green light is a multi-function indicator. This light will flash rapidly for about one minute each time the TV is plugged into the wall electrical outlet, when power is restored after a power failure, or using the SYSTEM RESET button. Do not attempt to turn on the TV again during this period. Wait for the flashing to stop and the light to turn off, before attempting to turn the TV on. While the TV is powered on, the light illuminates steadily. If the TV has been programmed to turn on automatically using the Timer feature,
A reset won't fix this. The standby light should be blinking a repeated count with a 3 second pause inbetween. Post that count here. That will indicate the circuit/condition that is preventing the set from turning on.
For the first one, please list the model number and count the blinks. Also, can you please post each problem separately. It will get too confusing trying to address 3 sets with different but similar problems.
The red led would flash about 1 to 9 times, then stop's about 5 sec and restart.
There is nurmerous problem that may cause your ctv not to function, first commond porblem is power supply, second is defflection circuitry Vertical and horizontal, second is a bad solder connection very rarely, bad cap's is a factor or voltage regulator. You would have to get the schematic first to even try to think about troubleshooting. Lot's of technician or fedup with hight price for info's, all info should be free if compagny's like sony want's to help. There web site well it speak's for itself, not enough tech support. You can't call, there no one there or won't answer.
If you need the schematic I don't know how but maybe I can send you a link. First I would check for short circutry to see if you can solve it.