0.) (yüklemek istiyorum cd kaybettim 2002 = I want to install lost cd 2002.) Left of the equal sign was auto-detected as Turkish-numbers and symbols included!!!) After going to google translate I found what I'm fairly certain is a need for drivers and software/utilities for this gentleman's slightly older, but very good quality Logitech webcam.
1.) Locate your hardware device model/product/serial number. Write this down as it beats taking down and putting up your cam over and over, and its clearer and less prone to mistakes.
2.) Go to Logitech's web-cam identification support webpage (http://www.logitech.com/en-us/support-downloads/downloads/webcams
3.) locate your particular model web-cam. the webpage is very nice with high quality graphics of many webcams and lists the model numbers directly below each picture. the pictures are great and often times i find my camera of choice before even looking at a model number and do that usually as a verification rather than a search technique. please do verify as a wrong model at this stage is going to prevent your installation before it even gets off the ground!!! :)
4.) If you're using an older web-cam, and you find that you can't find your old beast among the shiny new cams, go to the bottom of the webpage and look to the right hand side for a link that reads: Still can't find your product
this is the link to the legacy products webpage. go ahead and click to the legacy page and have a look for your camera.
5.) In under three seconds [How's that for search engine results, eh? :)] I have located what I'm fairly certain is the camera in question. the name matches and the picture is a dead ringer. All that's left is to compare the model numbers for verification and we've got our cam! this web-cam is located in the fourth row from the top in the first position [picture hopefully attached below! :)]
6.) Clicking on either the image or the name of the cam will take you to the support web-page for this product/web-cam. http://www.logitech.com/en-us/480/3403?WT.z_sp=Image
7.) And once there all your web-cam dreams and wishes have come gloriously true!!! Logitech is an incredible company with excellent products, and in my opinion, one of the finest support sites, bar none, on the planet!!! Here is an entire web-page complete with links to every imaginable aspect of your product, including forums, faqs, driver and software downloads, community, troubleshooting and more. It is an awesome array of 'everything' just for 'your' product. And it's there just for you!!!
8.) Okay, I believe my job here is successfully completed and so I will leave you to wide-eyed gazing and hushed giggling and yes, downloading everything your great little web-cam can possibly use and then-some (don't forget the new/updated software with all the coolest features your web-cam only dreamed of providing you!!!
9.) towards the top-right is the link for drivers and software: Download installation software, drivers, updates and more.
In this link you will find drivers and software for Operating systems Windows 98, ME, 2000 and XP. With a quick peek I found these drivers (QuickCam Driver v8.4.8. and Image Studio for QuickCam v.7.30 available for ALL the above mentioned operating systems and in over 12 different languages.