Question about TruTech PLV16190 Television

2 Answers

TruTech PLV16190 no picture, no sound

When trying to start up our 32" thin LCD TruTech, monitor blinks blue for a couple of seconds, the screen goes black, no sound either.

Posted by on

  • 1 more comment 
  • QB702 Jun 11, 2008

    Sombody put a passcode in my tv and locked out all of my channels what can I do to reset it to factory settings thanks. Mike

  • kdellis Aug 19, 2008

    trutech plv16190. won't turn on, turn on power and turns from red to on for a second then right back to red light. The screen stays black.

  • Daniel Gosling
    Daniel Gosling Mar 27, 2014

    IT HAS LINE GOING UP AND DOWN IT AND IT LOOK LIKE IT GOT CRACKS INSIDE OF IT

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 367 Answers

Open the back of the TV,and look at the can shaped items on the board that the power cord is hooked to.If any of them have the tops,or bottoms bulged out,they need to be replaced.This should get it working again.I hope this helps.If you have any other questions,please let me know.Thank You very much!
Tyler

Posted on Jun 17, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Very likely have blown fuses and capacitors in both the power supply and the backlight inverter sections. Repair is best left to a technician unless you are tech savy and able to use a soldering iron.

Posted on May 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have thin line of picture on right side of screen, rest is blank. Sound is fine


Hi,

If your LCD TV or monitor has stopped working, or is displaying one of the following symptoms, then it's a candidate for some new capacitors
- Flickering screen
- Screen image disappears after several seconds
- Dim screen
- Slow start
- Power LED on, but no picture
- Unusual colors and/or lines
The primary cause of LCD TV and monitor failure is caused by faulty capacitors. You can examine the capacitors in your LCD TV or monitor and actually see if they are bad.
If they appear bulged on top, then they need to be replaced.
New capacitors will solve a host of problems in LCD monitors and TV's and will extend the life of your monitor or TV by several years.
Check the cables, connectors and connections.
Take it to a repair shop.
https://www.youtube.com/watch?v=TR2iWN6b-LY

LCD TV Repair No Power Power Supply Common Symptoms Solutions How to...

Mar 05, 2015 | LG 32LG30 32 in. LCD HDTV

1 Answer

I have an element 32" HD LCD TV. I turn it on and it goes to the blue logo screen, but then all of a sudden it just goes black after 2 seconds. No sound or picture. Help?


If you have a blinking led on the front panel, we will need the sequence of blinks.

If not, you should have the power supply checked.

May 12, 2014 | Flat Panel Televisions

1 Answer

FIND A PLACE TO BUY A REPLACEMENT SCREEN FOR MY Trutech PLV16320VM 32" Thin LCD Monitor


A replacement screen plus labor would be about the same as a new monitor.

Mar 27, 2014 | TruTech Flat Panel Televisions

1 Answer

The monitor goes on but no picture. when i turn


RAM problem. Fix the RAM properly in the RAM slot.

May 07, 2009 | Olevia LT26HVX 26 in. LCD Television

1 Answer

NOTHING COMES ON


Open the back of the TV,and look at the can shaped items called capacitors on the board that the power cord is hooked to.If any of them have the tops,or bottoms bulged out,they need to be replaced.This should get it working again.Most of the time the big black capacitor on the power board goes bad,and bottom bulges out,but sometimes it is the other capacitors as well.I hope this helps.If you have any questions,please let me know.Thank You very much!

Tyler

Jan 27, 2009 | TruTech PLV16190 Television

1 Answer

Blue screen


Can you see the picture?Do you have sound?It could be either the TV is in the wrong mode,or it needs work.Try changing the mode on the remote to the TV function.If that doesn't work,open the back of the TV,and look at the can shaped items on the boards.If any of them have the tops,or bottoms bulged out,they need to be replaced.This should get it working again.I hope this helps.If you have any questions,please let me know.Thank You very much!


Tyler

Oct 19, 2008 | TruTech PLV16190 Television

Not finding what you are looking for?
TruTech PLV16190 Television Logo

Related Topics:

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top TruTech Flat Panel Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Are you a TruTech Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...