Question about Kodak EasyShare C613 Digital Camera

1 Answer

Powers off as soon as powered on - Kodak EasyShare C613 Digital Camera

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Posted on Aug 22, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my tv shuts off soon after its turned on?


The Sceptre is a fine TV but is very sensitive to power surges.
If the unit turns off, soon after powering on, it is most likely the power supply.
Try disconnecting the power to the unit for 20 minutes and allow to completely cool down.

Re-connect the power and try the unit.

Hope it works for you

May 23, 2014 | Sceptre 32 X320BVHD 32 LCD TV

1 Answer

6 amp power board fuse blow when power button pressed.


That is usually caused by shorted output transistors. What brand/model do you have?

Apr 29, 2013 | Audio Players & Recorders

1 Answer

We have a Panasonic Viera 42" Plasma tv. The picture went out and there is a red light blinking. Please advise.


This problems,it is the power supply board.It have dying and soon to dead parts call capcitors.U have all the tools and understanding basic electronic also can do basic soldering work?That the board,where the power a/c cord plug into it.Yes,take the tv aparts,check the power supply board for it board all it corners looking for dying and soon to be dead capactors parts.These dying soon to be dead capacitors are alway bulging or puffing ups onto it tops.By replacing all these dying soon to be dead capacitors,ur tv will have the right current and voltages,to power up and work gain.Or try website like Ebay.com to buy a whole refurbish power supply board for the replacement.

Dec 07, 2010 | Panasonic TH-42PD50U 42 in. Plasma EDTV

1 Answer

My philips ambilight wont switch on i can hear clicking noise and red standby light keeps flashing any ideas


U have tools like a soldering iron,desoldering pump or roll of desoldering braids,a roll of solders and understanding basic electronic also can do basic soldering?This problems,most of the times are causes by those dying soon to be dead components call capacitors on the power supply board.Yes,take ur tv aparts,the power supply board,that the board,where the power a/c cord plug into it.Check the power supply board for those dying soon to be dead capacitors parts,it alway bulges up on it tops or puffing up on it tops.Replaced these dying soon to be dead capacitors parts,will solved ur tv noises clickings,power LED light indicator will stop flashing.Tv will power up normal again an work.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Nov 20, 2010 | Philips 32PFL7332D 32 in. LCD HDTV

1 Answer

Triping breaker as soon as it is plugged in. can anyone tell me what usually is the cause of this problem when as soon as i plug the power cable in to the outlet, it would trip the breaker? no power to the...


try pluging it in on another outlet with an extension cord must be a diffent cerciut breaker if it happens again the microwave has a short. if not its that breaker or outlet.

Mar 31, 2009 | KitchenAid KCMC155J Convection/Microwave...

1 Answer

I have a denon 1720 dvd player. When you press the power button it comes on for 3 seconds then the power button turns back red and powers off. If you press the eject button within the 3 seconds the tray...


same equql problem....?????

Can you help?



i have a denon 1720 dvd player. When you press the power button it comes on for 3 seconds then the power button turns back red and powers off. If you press the eject button within the 3 seconds the tray opens and the power button stays green. As soon as you close the tray the power agin goes to red. i have a denon 1720 dvd player. When you press the power button it comes on for 3 seconds then the power button turns back red and powers off. If you press the eject button within the 3 seconds the tray opens and the power button stays green. As soon as you close the tray the power agin goes to red. Can you help? thanks thanks

Dec 21, 2008 | Televison & Video

Not finding what you are looking for?
Kodak EasyShare C613 Digital Camera Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...