Question about RCA RCR412C Remote Control

2 Answers

Help! 1. Hold on TV and POWER simultaneously (light comes on), let go 2. Press POWER then CH+ back and forth (light comes on), when TV turns off 3. press STOP, code is saved! this will not work how can i hand enter the code

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers

Look in this manual for the codes. should work.

http://remotefinder.rca.com/default.aspx?site=rca

Posted on Oct 10, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

1. Hold on TV and POWER simultaneously (light comes on), let go

2. Press POWER then CH+ back and forth (light comes on), when TV turns off

3. press STOP, code is saved!

Posted on May 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my pt-50lc14 hdtv my screen is stuck on this message, 5v eeprom), 3.3v (gc2), tv-factory mode


Have you tried any of the reset commands?
Try these....please let me know the result:

Method 1
1. Unit power must be ON and unit must be in STOP mode.
2. Press and hold [CH UP] and [CH DOWN] ON THE UNIT for over five seconds. The unit will turn off.
3. Press [DVD POWER] to turn the unit on.

Method 2
1. Press [STOP, TUNE MODE] on the main unit and [>10] on the remote control at the same time for about 3 seconds until the message "Initialized" disappears from the television screen.
2. Turn the unit off and on again.

Method 3
While the unit is off, press and hold [VOLUME +], [OPEN/CLOSE] and [POWER] on the main unit at the same time for more than 5 seconds.

Method 4
While the main unit is on, press [POWER] on the main unit for more than 4 sec. (All the indicators will blink twice when the main unit is reset.)

Another possibility is to unplug the power cord......wait 30 minutes and plug it back in, possibly repeating the steps above. (Method 1 should reset the unit but maybe trying each of them may be necessary until it is reset.

The message appears to be one that displays when the unit is in a setup mode.

Thank you for your reply.

Jan 02, 2014 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

Hi, how do i sync my venom dvd remote to my xbox 360? thank you


To enter a TV code:
1 Turn on your TV and point the remote toward it.
2 Press and hold the TV and OK buttons simultaneously for two seconds. All of the buttons on the media remote will then light up for two seconds, after which only the numeric TV buttons (1-12) will remain lit.
3 Enter the code for your TV.
4 Press the TV button again to save the code and exit. All of the buttons on the media remote will blink three times to confirm your selection.
To scan for a TV code:
1 Turn on your TV and point the remote toward it.
2 Press and hold the TV and OK buttons simultaneously for two seconds. All of the buttons
on the media remote will then light for two seconds, after which only the numeric TV buttons (1-12) will remain lit.
3 Press the CH+ or CH- button to send a series of off commands to your TV. Repeat until the TV turns off.

Jul 02, 2011 | Venom DVD Remote Control for Xbox 360

1 Answer

Won't work


1. Hold on TV and POWER simultaneously (light comes on), let go

2. Press POWER then CH+ back and forth (light comes on), when TV turns off

3. press STOP, code is saved!

May 23, 2008 | RCA RCR412C Remote Control

2 Answers

Mitsubishi


1. Hold on TV and POWER simultaneously (light comes on), let go

2. Press POWER then CH+ back and forth (light comes on), when TV turns off

3. press STOP, code is saved!

Apr 30, 2008 | RCA RCR412C Remote Control

2 Answers

Programming remote


1. Hold on TV and POWER simultaneously (light comes on), let go

2. Press POWER then CH+ back and forth (light comes on), when TV turns off

3. press STOP, code is saved!

Apr 25, 2008 | RCA RCR412C Remote Control

1 Answer

None


1. Hold on TV and POWER simultaneously (light comes on), let go

2. Press POWER then CH+ back and forth (light comes on), when TV turns off

3. press STOP, code is saved!

Nov 26, 2007 | RCA RCR412C Remote Control

1 Answer

I have a samsung bn59-00599a remote for samsung plasma fs and hughes satellite box i am unable to use remote for stb i also have rca remote controller rcr412c for use


1. Hold on TV and POWER simultaneously (light comes on), let go

2. Press POWER then CH+ back and forth (light comes on), when TV turns off

3. press STOP, code is saved!

Nov 26, 2007 | RCA RCR412C Remote Control

1 Answer

Programming the remote


1. Hold on TV and POWER simultaneously (light comes on), let go

2. Press POWER then CH+ back and forth (light comes on), when TV turns off

3. press STOP, code is saved!

Oct 22, 2007 | RCA RCR412C Remote Control

4 Answers

Program for my tv


Push the t.v. button on the remote then push and hold the on/off button and the t.v. button down at the same time until the on/off button comes back on and stays on, then you release them both. Then push the CH+ or channel up button on the remote and the on/off button alternatively until the t.v. goes off or comes on, each time you hit the CH+ button on the remote you are advancing the code for you t.v. forward in your remote, after your t.v. comes on or off then hit the stop button on the bottom of the remote and you have stored the code for your t.v. Hope this helps.

Oct 11, 2007 | RCA RCR412C Remote Control

2 Answers

Setting it uo


Push the t.v. button on the remote then push and hold the on/off button and the t.v. button down at the same time until the on/off button comes back on and stays on, then you release them both. Then push the CH+ or channel up button on the remote and the on/off button alternatively until the t.v. goes off or comes on, each time you hit the CH+ button on the remote you are advancing the code for you t.v. forward in your remote, after your t.v. comes on or off then hit the stop button on the bottom of the remote and you have stored the code for your t.v. Hope this helps.

Sep 25, 2007 | RCA RCR412C Remote Control

Not finding what you are looking for?
RCA RCR412C Remote Control Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72196 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...