Question about Microsoft Office Word 2007 Full Version Corporate License for PC (059-05468)

2 Answers

Word is locked and i cannot use it totally - Microsoft Office Word 2007 Full Version Corporate License for PC (059-05468)

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 32 Answers

Why not try a unlock Microsoft word software,MS Word Password Recovery 5.0 is such a software,download form :
unlock word password
Good luck!

Posted on Aug 23, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 402 Answers

Hello,
Read here:
http://office.microsoft.com/en-us/wo...406121033.aspx

And

http://support.microsoft.com/kb/818852

If all else fails you may try this AT YOUR OWN RISK as I do not vouch for the fix listed here.

As far as I know, Office Password Unlocker is capable of removing ms document passwords, including password to open and password to edit.

You can solve this problem with Word Password Recovery 5.0

1. Download product from Password Recovery Official site
2. Decompress the product and install follow the step-to-step guide.
3. Open the installed software, choose the forgotten passwords file, then you will find there have three types of password attack, brute-force attack, brute-force attack with mask, and dictionary attack. You can use either of the attack for your situation to effectively crack the password in a time as short as possible.
Finally, you only have to press the start bottom then you'll find you lost password.

Thanks,
Bhautesh

Posted on Aug 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door locks locking and unlocking on their own


Replace the drivers switch to cure this or disconnect the connector to the locks.

Feb 28, 2014 | 1997 GMC Jimmy

1 Answer

How to open a deadlocked rear door


Remove the seat and door pad. You can access the lock through a small hole. Break the top inner corner of the lock to release the dead lock and open the door.

Jan 24, 2014 | 2004 Volkswagen Golf

1 Answer

Locking mechanism for the topcon gts-3b total station isn't locking


The lock on almost any Digital Theodolite or non-robotic total staton is very similar. It's an rotating shaft with an side ways egg shape at the end. As you turn the knob the oblong end pushes on a pin or some sort of friction device that is attached to the axis. Often what will happen is either the position of the lock shaft moves, so it reaches a limit before enough friction is applied to the axis. Or some part of the lock is jammed and is not pushing into the axis.
It should be visible behind the display, and there should be 2 set screws on the bottom of the instrument below the lock (on the outside, not behind the screen) Most likely backing thoes off, just a little bit will give you enough movement to watch internally where you can find a new lock position, and tighen the setscrews again to hold it in place.

Jul 25, 2012 | Topcon Gts-3b 5" Total Station Theodolite...

2 Answers

Unresponsive control panel on Kenmore washer 110.280 327 01


check and make sure its not set on delay mode first,if so press delay button till it cancels delay time on readout

May 11, 2012 | Kenmore Washing Machines

2 Answers

My cell phone locked up


Which kind of locking system in your Cell phone , its security lock , or Network Lock ,or handset lock , if the total handset lock, so thats means , its a defaulter mobile in Crime History.

Jul 24, 2011 | Google Cell Phones

3 Answers

N73 full software (smart movies, xplore, total recall, phone lock


Goto funmaza.com there you can all software for your mobile.

Jan 14, 2009 | Nokia N73 Cellular Phone

1 Answer

Power locks on 2000 honda accord coupe


have the computer checked yuu have a error code or a short in the system

Dec 27, 2008 | Honda Odyssey Cars & Trucks

2 Answers

N73 full software (smart movies, xplore, total recall, phone lock


for x-plore
for smart movie
post your IMEI so that i can give you the key for smart movie

Dec 14, 2008 | Nokia N73 Cellular Phone

1 Answer

Konica minolta 1216


1. A fan irregularity signal, excessive current draw due to binding. Examine M4 for obstructions which may bind the fan. Check the M4 fan lock signal (main CB, CN26-4) in the 47 mode, input code 42. The voltage should be between 0.1 to 0.2V DC. If 5V DC is present, either the fan is binding or the fan is defective. Replace M4 (p/n 25HA80512).
Note: If the fan lock signal is normal, install the version 17.0 EPROM (p/n 101517-17.0) to prevent false F54 errors as outlined in 1015/1212 Technical Bulletin #15.

2. IC7 on the main CB has shorted due to a failed total counter. IC7 shares the 24V DC control signal line with the exposure lamp, separation solenoid (SD1), registration solenoid (SD2), total counter, key counter, and cooling fan (M4). All loads except the total counter operate in diagnostics.
Replace the total counter (p/n 466088201) and the main CB (p/n 25HE-7312).

3. A poor connection between the cooling fan (M4) and the main CB. Reseat CN73 at M4 (cooling fan) and CN26 on the main CB.

Dec 19, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Microsoft Office Word 2007 Full Version Corporate License for PC (059-05468) Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2854 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...