Question about Panasonic PT-AX200U Projector

1 Answer

HDMI inputs do not show a picture. They worked but now do not. They display the setup program from the Onkyo AV receiver via HDMI output, but not when the receiver is pushing any other signal via the HDMI output.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

This is likely a problem with the receiver not the projector. If the setup screen from the receiver is displayed through the projector, then the projector is functional. If the actual signal is not displayed, then the receiver is not sending the signal. The setup screen is generated inside the receiver and is injected later in the video path than the input signal. Try a direct connect from the signal source (other side of the receiver) to the projector. Again, if that works, then the problem is the receiver.

Dan

Posted on Aug 21, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Onkyo TX-SR875 HDMI output not syncing with display


You need more than to be 'good with a soldering iron' on this type of fault. It will be a basic fault but unless you understand the self test modes and video path, suggestion is if no use.

May 21, 2017 | Onkyo Audio Players & Recorders

1 Answer

Unable to connect a blu ray dvd player to onkyo tx-sr605 via hdmi


Not sure what unable to connect means..but I will assume you have the correct cable.

First make sure you have plugged the from the HDMI cable from the DVD play into the IN 1 HDMI port on the back of your Onkyo

On the Receiver
Enter the Setup mode
Select INPUT OUTPUT ASSIGN
Next make sure the HDMI monitor out is set to YES on the Receiver
Monitor out
HDMI Monitor - YES

Next you need to assign the HDMI INPUT to DVD
Select INPUT OUTPUT ASSIGN
HDMI INPUT
DVD - IN1
CBL/SAT - IN2

This may be your issue.

Next step would be to verify your television input settings.

Nice receiver!

Best of luck!

Apr 13, 2011 | Onkyo TX-SR605 Home Theater Receiver 7.1...

1 Answer

Onkyo TX-SR706 Setup Display Problem


For adjustments to receiver you can always run a component or composite cable to your plasma tv. After adjustments are made just return to HDMI input.

Feb 24, 2010 | Audio Players & Recorders

5 Answers

I cannot get video signal from my Samsung p1590 Blu Ray player via HDMI to pass through my Onkyo TX-SR606 AV Receiver. I get video if I connect Blu Ray player directly to TV, and have tried all HDMI ports...


I think this one is for the Onkyo wizards:

I would write them via email here:

http://www.onkyousa.com/feedback_form.cfm

1-800-229-1687
However I did find this 2 page hookup manual with nice notes at link listed below that may help you solve the mystery:

(seems you may have to assign the digital input)

http://filedepot.onkyousa.com/Files/QuickHookup/TX-SR606_QSS_En_A.pdf?CFID=918117&CFTOKEN=40624545&jsessionid=f0306ea8a0d68bb60a49102e3e5510576756


Assigning the Digital Input
If there’s no sound, you’ll need to assign the digital inputs as
necessary using the setup menus on the TX-SR606’s display.
If you connect your DVD player to the AV receiver’s COAXIAL 1
DIGITAL IN, and your cable/satellite receiver to the COAXIAL 2
DIGITAL IN, as shown, it’s not necessary to assign the digital input.
The onscreen setup menus appear only on a TV that is
connected to the HDMI OUT. If your TV is connected to the composite video or S-Video MONITOR OUT, or the
COMPONENT VIDEO OUT, use the TX-SR606’s display when changing settings.

Thanks for using FixYa!

Kelly

Feb 19, 2010 | Onkyo TX-SR606 Receiver

1 Answer

Why cant I supply my onkyo surround sound system


You need to assign the HDMI input(s) to the functions they represent, using the Front Panel Tuning/Preset control...

If you connect a video component to an HDMI input, you must assign that HDMI Input to an input selector in Setup.
For example, you could assign the “DVD” setting to “IN1”, and assign the
“CBL/SAT” setting to “IN2”.

Likewise if you use digital audio inputs...

Assigning the Digital Input
If there’s no sound, press the [DIGITAL INPUT] button repeatedly until sound is heard. The digital input is now properly assigned.
If you connect your DVD player to the AV receiver’s COAXIAL 1 DIGITAL IN, and your cable/satellite receiver
to the COAXIAL 2 DIGITAL IN, as shown, it’s not necessary
to assign the digital input.

Feb 12, 2010 | Onkyo HT-S5100 Theater System

1 Answer

1080P video via HDMI generates awful interference


Your Plasma's native resolution is 720P. Go into the Blu Ray's output setup. you can choose 480p 480i 720p 1080i and 1080p. Set it for 720p that should clear up the issue.You may have to run Component directly to the TV since you only have 1 HDMI input and you can run Digital coax or optical to your AV receiver for audio. On a 50" TV the difference between 720p and 1080p using "GOOD" cables cannot be seen by the human eye. Above 50, yes it is noticeable.
Hope this helps.

May 22, 2009 | Onkyo TX-SR705 Receiver

1 Answer

Issues Displaying picture from HDMI upconversion


I've posted this other places. Hope it helps.

My HT-S6100 had a similar problem with my DVD player and some times with my Cable/DVR box. The signal wasn't getting received at the TV. So, first I changed the input jacks my DVD and Cable box are plugged into on the receiver (e.g. from HDMI 1 & HDMI 3 to HDMI 2 & HDMI 4). Second, I reprogrammed the Input Assignments to match (e.g. HDMI in 2&4). Third, I deleted any Input Assignments that weren't applicable. For instance, I'm only using HDMI connections, but there were Digital and Component Input Assignments programmed in. When I say I deleted them, I actually set them to "----" (just scroll through the options and you'll find this.) Finally, I turn on my video/audio sources (PS3 in your case) and let them load/warm up before I turn on my Onkyo receiver. It seems to be working. Good luck.

May 22, 2009 | Onkyo HT-S5100 Theater System

2 Answers

No audio sound from HDMI connection from TV to Onkyo 606 amp.


you have the output of the receiver going to the input of the TV?

i believe that you should be running the TV output to the receiver input to get your sound from the TV to the receiver and thus speakers.

the easiest setup is to just run your cable box and DVD player HDMI's into your TV inputs. then run another HDMI from the TV output to the receiver input.

Feb 28, 2009 | Onkyo TX-SR606 Receiver

1 Answer

Onkyo TX-SR875


My mistake, HDMI in is not routed to any other output but HDMI out

Oct 04, 2008 | Onkyo TX-SR875 Receiver

Not finding what you are looking for?
Panasonic PT-AX200U Projector Logo

669 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Mitch S
Mitch S

Level 1 Expert

25 Answers

Are you a Panasonic Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...