Siena rcm 148 shows 'demo mode' error - Blaupunkt Car Audio & Video

Demo Mode setup is initiated from the Welcome Screen in OOBE by pressing Ctrl + Alt + D key combination, or tapping the screen 10 times. This will show a prompt asking the user to confirm they want to set up Demo Mode. Accepting the prompt will start off Demo Mode setup.

Google make and model and find manual for it.

A quick trick on the faceplate connectors is to use the eraser of a lead pencil to clean the surface of the faceplate connectors. It could simply be a dirty connection.

Hello - If the unit was in demo mode it would not produce any water or rinse actions. So if you have water entering the unit, I doubt it is at all in demo mode. Error E01 for Electrolux models means the unit has detected a water leak. This will need to be checked and a repair performed by a technician since they will need to repair the leak and retest unit.

replace the temp probe in the steam boiler

Error Code 148 ? Are you sure; try to read te codes with THIS PROCEDURE

Tell us news. Hope helps.

tengo un reproductor que no enciende y que tampoco lo lee la computadora, y no se si carga porque no marca nada en la pan talla, nadamaas se calienta el reproductor.

Thats an amplifier, not a head unit. The point of that is to power the speakers. The output on the head unit plugs into this, and the speakers plug into this. You tune the station on the head unit in the dashboard

Here is the manual:

http://www.eserviceinfo.com/downloadsm/4353/Blaupunkt_TEXAS%20RCM148.html

Hi the way I fixed it was to put the unit in standby then hold in the menu button (left hand side next to control button)Then move the control button (right hand side) until you get to demo on. Then hold in the control button until it shows demo off. Job done. Also you can activate the aux settings from here to. Hope this helps Shane