Question about Office Shredders

3 Answers

How To repair manual

I need parts for my shredder

Posted by on

  • 4 more comments 
  • Anonymous May 08, 2008

    I need a part for my SCS 6 Achiever Paper Shredder. The black 'catch all' in the back of the shredder where the paper comes out. Help!

  • Jose Huertas May 15, 2008

    I some gears

  • harv515 Jun 09, 2008

    I need 2 of the plastic gears for my PS60C-2 Fellowes Shredder

  • Anonymous Jul 17, 2008

    Completely dead ...after about 2 mins use....was very hot ..slight burning smell?

    Have checked plug fuse ..was ok.



    repair info required please



    DA Tees

  • Anonymous Aug 26, 2008

    the plastic gear that gets driven by the electric motor has sheared,,,so need that gear,,,,

  • janlyla Sep 19, 2008

    I have an Aurora AS501X-MS shredder. It's about 5 years old and has had minimal use. The paper isn't being grabbed and pull into the shredder blades. I really like this machine. I would like to know if i can bring it somewhere and have it repaired. Thank you.

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 40 Answers

I HAVE A DEAD ONE WITH GOOD GEARS. CONTACT ME AT ROCKIT@LISCO.COM

Posted on Sep 22, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 58 Answers

This is how a got my hard to fine gear!

Contact Michael Business Machines for your local dealer 1-800-223-2508

Good luck, Tom

Posted on Mar 27, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

There are some gear kits for Fellowes shredders at http://www.sportslinkup.com/shop/0-Fellowes-gear-1.html, it's the whole assembly; hope it helps.

Posted on Jan 18, 2011

2 Suggested Answers

t_vinson57
  • 58 Answers

SOURCE: Achiever, Model CCS 5000, shredder, need a part (a large nylon gear)

This is how a got my hard to fine gear!

Contact Michael Business Machines for your local dealer 1-800-223-2508

Good luck, Tom

Posted on Mar 27, 2009

kd6rhd56
  • 400 Answers

SOURCE: Need repair parts schematic or manual for OM99729

closest I could come up with is a Fellowes C14 maunal at www.fellowes.com

Posted on Jul 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get my hands on a technical repair manual for a Dahle 20606EC shredder with all the specs, part #'s, troubleshooting, etc..


Good luck with that! Getting tech repair manuals is like finding gold. Call Dahle and they may sale you one. Otherwise just open the unit up, find what the issue is and then call them. Dahle's are phenomenal units and virtually never break down. What is the problem? If you're simply trying to pre-empt an issue then I say don't worry about it.

Feb 13, 2015 | Dahle Office Shredders

1 Answer

Source for gear for fellowes 301101 DS-1 paper shredder


Replacement Parts - Paper Shredders Can I get my Fellowes paper shredder repaired or purchase parts for it?

The majority of Fellowes personal shredders (small shredders that can fit under a desk) are repairable and will have parts available. If you would like to check your model shredder to determine if parts are available, please click the "Ask a Question" tab above, and advise the model of shredder, the shredder's serial number and a description of the part needed. The serial number will be located on the bottom side of the shredder head below the bar code.

*** Please note: If your shredder is still within the warranty period, we ask that you do not open your shredder until speaking with a Fellowes Representative, as opening the unit may void your warranty.***

Fellowes office/commercial shredders (large shredders that cannot fit under a desk) are repairable and parts will most likely be available. Please do not try to repair the shredder yourself or you will void your warranty. Models included in the office shredder line are 125i Series, 225i series, 325i series, 380 series, 420 Series, and 480 series.

If you would prefer to have a local servicing dealer provide repair service to your office shredder, and would like to find a dealer in your area, please see the below link to search for a dealer by zip code.

http://www.fellowes.com/Fellowes/site/support/support_authorizeddealers.aspx
To order replacement parts, or if your model shredder is not listed, please click the "Ask a Question" tab above to ask us about your shredder. *** Please be sure to include your serial number from your shredder for the fastest service ***

Our office hours are 7:00 AM to 7:00 PM, Monday through Friday Central Standard time.

Jan 22, 2015 | Fellowes Office Shredders

1 Answer

Need the gears for the PS80C-2 Shredder


Maybe the below manual will help you in locating the gears needed.
Fellowes Shredder Manuals

Sep 27, 2014 | Fellowes Cross-Cut Shredder

1 Answer

Spare parts for a fellows p45-c shredder


Can I get my Fellowes paper shredder repaired or purchase parts for it? The majority of Fellowes personal shredders (small shredders that can fit under a desk) are repairable and will have parts available. If you would like to check your model shredder to determine if parts are available, please click the "Ask a Question" tab above, and advise the model of shredder, the shredder's serial number and a description of the part needed. The serial number will be located on the bottom side of the shredder head below the bar code.
Go to
http://www.fixya.com/answer/answerpageslideview.aspx?ctg=176&fml=0&brd=mine&thid=24364827
and 'Ask a Question' give personal details, and that will give you details if spares are available

May 08, 2014 | Fellowes PS8C Shredder

1 Answer

I NEED INTERIOR MACHINE PARTS TO MAKE REPAIRS ON MODEL # AS501X-MS. CAN I ORDER REPLACEMENT PARTS? I NEED A PARTS LIST.


I was having the same problem with my shredder. I called customer service; I was informed it was the gears on the inside of my shredder. My shredder is no longer under warranty. Don't open your shredder to repair it yourself because it will void your warranty. However, she is mailing me out the part I need for a small fee. Their customer service number is 1-800-327-8508 in the USA and international only 1-310-793-5650. I do hope this help you!

Mar 02, 2011 | Aurora Global AS501X-MS Shredder

1 Answer

Need replacement parts to repair shredder assy for royal 15mx shredder.


Try biggable.com/shredder-parts.Generally the plastic gears in these go south from being overloaded.

Mar 24, 2009 | Royal VF1000MX Shredder

2 Answers

VF1012MX Shredder


Call Royal at 1-800-524-0799 and describe part they can normally help.

Dec 27, 2008 | Royal VF1012mx Shredder

Not finding what you are looking for?
Office Shredders Logo

Related Topics:

1,540 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Shredders Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

quennie732

Level 2 Expert

393 Answers

Jim Keysor

Level 2 Expert

307 Answers

Are you an Office Shredder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...