Question about D-Link 802.11g Wireless Router WBR-1310 (WBR1310)

1 Answer

I have currently setup a wireless router for my broadband using my D-Link. It is working because the laptop can see the connection but upon connection it is requesting for a security key to which I am not aware of since I have not setup any security key yet

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

You have to remove the settings that specifiy a security key. you don't have to use a key if you don't want to secure your network.

Posted on Aug 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a dlink print server dpr1040 and dlink wireless router how do i print wireless


DPR-1040 information - http://www.dlink.com.au/products/?pid=777

All of this is from the manual located at link above under the resources tab.


Wireless Setup

WPS (Push Button Configuration)
WPS simplifies the process of connecting to a wireless network to a touch of a button. To use WPS you must have a WPS compatible wireless router,if you do not then you will need to manually configure the wireless connection in the web configurator (see Web Configurator below).

1. After following the hardware installation steps in section 3, ensure your wireless network is operating normally. When ready, press the WPS button located on the side of the DPR-1040. The blue LED should start flashing repeatedly.

2. Within 120 seconds, press the WPS button located on the wireless router you will be connecting to. This button may also be located in the router's web configuration pages labeled "Push Button Configuration (PBC)".

3. If successful, a wireless connection will be established between the two devices.
This connection is secure and uses automatically generated encryption keys; you do not need to remember them.

Note: If you experience problems connecting to a device, please try again. If you still experience problems, the device you're connecting to may be incompatible with the DPR-1040. Also, make sure you are connecting to a router or access point (AP).


Web Configurator

1. After following the hardware installation steps in section 3, ensure your wireless network is operating normally. When ready, type the IP address of the DPR-1040 into your browser, the default IP address is 192.168.0.10. If this does not work, use the PS-Link utility to find out the IP address.

2. Upon accessing the web configurator, click Setup > Wireless Setup.

3. On the next screen, enter the wireless network settings as provided by your network administrator.

4. Click Apply Settings, the DPR-1040 will restart and the wireless setup is complete.

Note: If your wireless connection does not work, check that you have entered the correct network settings into the Wireless Setup screen.

May 18, 2012 | D-Link DIR-412 Mobile Broadband Wireless...

1 Answer

I just bought this router and am trying to get it connect with a Verison wirelss USB mobile broadband. How can I connect it to my computer and an Xbox 360?


For Verizon i found that Currently, the DIR-412 Mobile Broadband Wireless Router is the only D-Link router that is 3G compatible. The DIR-412 supports 3G USB adapters complying with HSUPA/HSDPA/EV-DO/TD-SCDMA networks and works with most major cellular carriers (AT&T, Sprint, Verizon, Rogers, Telus, Bell, etc).
D-Link routers empower gamers to easily connect their Microsoft Xbox to network and experience lag-free online gaming. All you need is a D-Link router to go along with your broadband connection and Xbox Live subscription and you can go head to head with friends and adversaries from around the world.

The D-Link DI-624 Wireless Broadband Router, DI-614+ Wireless Broadband Router, and the D-Link DI-604 Broadband Router have all passed the tests for compatibility with Microsoft Xbox Live with specific firmware. Just download the specific compatible firmware listed below to your D-Link router before connecting to Xbox Live.

  • Click here to upgrade your firmware.
  • Click here for Xbox Live setup instructions with a router.
  • For Xbox Live support, please visit www.xbox.com.


  • If you need more help come back.

    Post / thumbs / testimonial are welcome!

    Dec 22, 2010 | D-Link DIR-628 Wireless Router

    1 Answer

    Wifi getting connected with new linksys


    You need to call Linksys again for them to help you setup the other computer. For the none-working computer, you don't need to run the setup CD for the router. All you need to do is connect to wireless network like what you did on the working laptop.

    Jun 26, 2009 | Linksys Wireless-G Broadband Router

    2 Answers

    Cannot connect to wireless Broadband Router


    Call linksys technical support. If they cannot help try this http://technicalsupport.blog.friendster.com

    Feb 18, 2009 | Linksys Wireless-G Broadband Router

    1 Answer

    Connection of D-Link 02.11g/2.4GHz Wireless Router


    Connection can either be wired, or wireless.

    If wired, connect a cable from one of the ports of the new PC to one of the ports on the back of the router.

    If wireless, you will need a wireless card for the new PC. Install the card, set up security, and you will be connected.

    Jan 20, 2009 | D-Link 802.11g Wireless Router WBR-1310...

    1 Answer

    Connecting to the wireless router


    You would have to consult your Motorola wireless router support

    Have you tried this link ?

    http://broadband.motorola.com/consumers/support/default.asp?supportSection=CableModems

    Jan 18, 2009 | Arris Wireless G Broadband Router (wr850g)

    1 Answer

    Connectivity


    Hi Joe,

    That just depends on how you want to connect with your laptop.
    If you need wireless access, then you have to use the WRT54G, because the RT31P2 has no wireless capabilities.
    If you are connected via ethernet cable, then you can simply take the WRT54G out.

    If you like to read up on different scenarios, here is my favorite page.

    Enjoy!

    Jan 07, 2009 | Linksys WRT54G Wireless-G Broadband Router...

    1 Answer

    USB Broadband to wireless router through desktop PC


    If I get you right you are useing a 3g Internet connection and have a router wich conets the 2 computers together, the problem is that you can't share the internet connection.
    Without any information about the operateing systems I can tell you the idea:
    First you need to disable DHCP server on the router and use static IP addresses on both PC, the IP address should be something like

    PC1:
    IP: 192.168.0.2
    Network mask:255.255.255.0

    PC2:
    IP: 192.168.0.3
    Network mask: 255.255.255.0
    Default gateway: 192.168.0.2

    In this IP configuration above PC1 has the 3g modem connected.
    This was the easy part, hard part is to share the internet connection on the network, that's a little different ritual on every operateing system, try to use google to get your specific one.


    However there's a much more easier way to solve all your problems if you can't make it work, but it costs money. All you need to buy is a 3G router and that will do the same thing for you what your old router did.
    I did a little search for you on Australian Ebay to see what you can get.
    But I'm sure you have your own cheapbfavourite source of computer hardware as well.


    Hope this will help you sorting out your porblem.

    Regards
    Imre

    Nov 26, 2008 | Sabrent USB 2.0 NT-USB20 Ethernet Adapter

    2 Answers

    Linksys Wireless G Router Set up


    I ended up loading the router setup cd onto another laptop, and it worked fine. I still don't know why the first laptop had the error code, but they now both, work perfectly fine. Thanks, anyway.

    Sep 06, 2008 | D-Link DI 514 Wireless Router (DI-514)

    1 Answer

    Laptop setup


    just connect the linksys router to wireless router and just install the setup cd given with wireless router ..after configuring your laptop just insert the cd in another laptop and copy WEP key in it and get connected through wireless network

    Jun 19, 2008 | Linksys Wireless-G Broadband Router

    Not finding what you are looking for?
    D-Link 802.11g Wireless Router WBR-1310 (WBR1310) Logo

    Related Topics:

    50 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top D-Link Computers & Internet Experts

    Prashant M
    Prashant M

    Level 3 Expert

    2260 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18394 Answers

    Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...