Question about Microwave Ovens

1 Answer

HOW DO YOU REPLACE THE CONTROL PANEL SUB ASSEMBLY FOR A GE PROFILE 2.0 CUBIC FT MICROWAVE?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Microwave Ovens Master
  • 9,047 Answers

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

You can find helpful exploded view diagrams and order parts by entering your full model number here. They're our favorite supplier.

Next, disconnect the strip as shown in the photo below, then remove the screws that hold your circuit board in the old frame.

HOW DO YOU REPLACE THE - cdb61b7.jpg

Then carefully (since the display is made of glass) move your circuit board to the new frame or subassembly, and reassembly is the reverse of disassembly.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Aug 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the Interior Cubic Foot capacity and the wattage of my GE Profile Microwave JE1540WW02?


GE oven model JE1540WW02 has a capacity of 1.5 cubic feet, and cooking power of 1000 watts. The power is listed on page 14 of the owner's manual here.

William E. Miller
http://www.MicrowaveControl.com
Microwave Oven Control Panel Repair Nationwide
"Recycling by repairing since 1982"

Jan 15, 2017 | GE Microwave Ovens

1 Answer

I need to replace my over the range GE microwave Model # JVM1330WW002 and don't know what size/capacity it is?


Get cubic foot size by multiplying height x width x depth.
Divide that by 1728. If oven is 12 x 12 x 12 then it's exactly 1 cubic ft.
If 6 x 6 x 6 then it's 1/2 cubic ft or. 50 cu ft

Nov 28, 2014 | GE Microwave Ovens

1 Answer

Direct replacement for pvm2070 microwave


The control panel assemblies for these touch screen models can now be repaired affordably if you have issues with seeing or setting the clock and operating it, etc. See details here.

For more free DIY and other help & advice, feel free to contact me via my site.

Please include FULL model number*, FCC ID number*, + detailed symptom information. ( * on the tag in cooking cavity or around door frame or control frame or on back)

William E. Miller, AS-EET
http://www.microwavecontrol.com
Microwave Oven Control Panel Repair Nationwide
"Recycling by repairing since 1982"

Aug 28, 2014 | GE Profile PVM2070DMWW White Spacemaker...

1 Answer

My GE Profile Countertop Convection/Microwave Oven PEB1590DMBB Has stopped working.


It sounds like you may have a shorted cook relay on the control circuit board which can be repaired simply and inexpensively.

A YouTube video showing how to remove a typical over the range control panel assembly in under 5 minutes, is here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Nov 30, 2012 | General Electric PEB1590DMBB: Profile 1.5...

1 Answer

How many cubic feet is a GE spacemaker model l# JVM240WL001


you must ask some vendor Online via chat with GE, they offer many Sales, and good opportunity. Get in tourch with them.
God bless you

Aug 03, 2012 | GE Profile Spacemaker 1.8 Cu. Ft....

1 Answer

No power to my microwave GE JVM1750DPBB


You're looking $130.49 for the board.

May 01, 2012 | GE Microwave Ovens

1 Answer

I have a GE Profile Spacemaker XL 1800 JVM1860SD microwave that recently started making a zzzzzzzz noise whenever it is plugged in. The light also seems to be stuck on. The noise seems to be coming from...


That would be a defective electrolytic on the control circuit board.

We see and repair this problem often with our $39.95 service. Details are here.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

microwavesvc_45.jpg

Jul 09, 2011 | GE Profile Spacemaker 1.8 Cu. Ft....

1 Answer

I have a GE Profile Spacemaker Microwave Touch Pad does not work


Sadly, GE does not make individual parts available for these controllers, so they cannot be repaired.

You have to replace the control panel sub-assembly (part number WB07X10733 in your case) and the best price I've found on that is $370.32 here (compared to $483.25 direct from GE).

In my opinion, this does not do much to inspire brand loyalty...

Or you may be able to find a whole oven on eBay for about that or less.

Sorry to bear bad news. Good luck.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer

May 27, 2010 | GE Profile Spacemaker Over-the-Range...

1 Answer

Just wanted to know the size of the GE profile microwave model JVM1660BB005. Is it 1.5 cu ft? Looking at a new model JVM1540LNCS to replace it and want to use the same mounting hardware.


In GE microwaves, the first 2 digits of the model number are the cubic footage. 1660 is 1.6 cubic foot, 1540 is 1.5 cubic foot. Take care trying to use the existing hardware, the exact placement of hardware and upper installation screws may vary from year to year or model to model..

Mar 09, 2010 | GE Spacemaker JVM1640SJ Microwave Oven

2 Answers

I'm trying to remove a Hotpoint RVM58003. I removed four long bolts from the top but it does not move. Any help on what I need to do to remove it? Dan


The Hotpoint RVM58003 (circa 1984) cannot be lifted off a hanger after the four top screws are removed because it doesn't have a separate pre-installed hanger like newer units do. The rear mounting screw holes are part of the outer frame of the unit, which requires removal of the Microwave sub-assembly of the Hotpoint RVM58003 to expose the outer metal frame and the array of pre-drilled rear mounting holes before the rear mounting screw(s) can be accessed and removed. Based on my recent experience removing a Hotpoint RVM58003 Microwave Hood from 1984 it appears the unit was originally installed this way too. Please note that this is a very involved process. Basic steps are: 1) Unplug AC power to the unit, or turn off the circuit breaker. 2) Remove the top plastic grill over the door and control panel (2 screws). 3) Next to the grill screws remove the larger left/right screws holding the Microwave sub-assembly in. 4) Drop down the hinged light bulb/air filter cover panel (mine had 7 screws). 5) Remove the small metal cover plate on the right under the control panel. This exposes the Microwave sub-assembly electrical connector. 6) Disconnect the Microwave sub- assembly connector. 7) Carefully pull the Microwave sub-assembly out of the frame and set aside. You may need to fish the power cord through the cabinet or unscrew the power cord terminals. NOTE: this is best done with a helper because this sub-assembly is about 25-30 pounds. 8) Once the sub-assembly is out the rear plate is exposed and the rear mounting screws can be removed. I found that the GE/Hotpoint Owner's Manual does not have installation instructions. Neither does the GE web site, they only have the Owner's Manual. For more specific help and instructions I suggest calling The GE Answer Center at 800-626-2000 or hiring a professional installer experienced with this older style Microwave Hood.

Jan 23, 2009 | Hotpoint JE740WY/GY Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

225 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...