Question about Samsung HLM617W 61" Rear Projection Television

1 Answer

Hi my problem is yellowing colour on the white but only in the middle not on outer 150mm section of screen though. also im only new to this mamoth r.p.tv so i wondered if a new bulb will fix my colour problem or is the colour tube my problem???... as it takes a minit for the screen to warm? this is why im thinking my bulb may be on its way out.. please save me some money before i spend an arm and a leg fixing somthing that wasnt the problem.. p.s im going by the photo asuming this is my telly as im not beside to get the model num. i know the outside of the telly is 1.5 mtr by 1.2 mtr samsung around 5 or 6 yrs old

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,476 Answers

Laurenkristy,

You have a bad color wheel. The lamp may also need replaced depending on how old the set is and the number of hours. I have a tip at http://www.fixya.com/support/r4251975-replace_dlp_light_engine which will help you replace the light engine and give the best place to get a replacement. I also have a tip at http://www.fixya.com/support/r4251975-replace_dlp_light_engine which explains when you need to replace your lamp, why and where to get the best price.

Thanks for using FixYa and for the great rating.

hardrocko

Posted on Aug 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Swann n3960


Hi ,
Is the colour of the other plug white ? Then red and white are for the audio ( red is right channel and white is left channel ) . The yellow plug is for video .
Regards .

Nov 20, 2013 | Office Equipment & Supplies

1 Answer

Hi, im searching for the stereo wiring chart for my mitsubishi lancer 2002 GLXI. i have searched for it but the colours are completely different to what i have. For example the colours i have are - Blue/...


This is all I could find. Hope it helps.


WIRE COLOR POLARITY LOCATION
Battery RED/BLACK (+) RADIO HARNESS
Accesory BLUE (+) RADIO HARNESS
Ground BLACK (-) RADIO HARNESS
Illumination GREEN/WHITE (+) RADIO HARNESS
Power Antenna YELLOW (+) RADIO HARNESS
LF Speaker (+) WHITE/BLUE
LF Speaker (-) BLACK/BLUE
RF Speaker (+) WHITE/RED
RF Speaker (-) BLACK/RED
LR Speaker (+) YELLOW/BLUE
LR Speaker (-) GRAY/BLUE
RR Speaker (+) YELLOW/RED
RR Speaker (-) GRAY/RED

Apr 14, 2011 | 2002 Mitsubishi Lancer

1 Answer

Colour of screen changes from white to yellow


may be possible that a cord from monitor to cpu is loose.
if not it is a problem in the driver ic and the cost of repair is about 20-25$

Jun 02, 2010 | Acer X193W LCD Monitor

1 Answer

Hitachi 50v715 screen is yellow in the middle while the outer edges of the screen show white


The Optical Engine needs to be replaced. Due to the cost of the repair, I recommend you to call Hitachi at 1800-HITACHI to see if they could help with repairs and also refer a Service Facility to you to confirm the symptom.
I hope this helps,
Skyassoc

Oct 24, 2009 | Televison & Video

1 Answer

4 colour dots on printout but not 150mm apart


Measure the distance between two of the same coloured dots down the page, if it is just over 150mm then it is caused by scratches on the photoconductor drum (this is the only thing that has a 15.4mm circumference). Try printing a black and white only document, only the black dots should appear. Removing the photoconductor and gently polishing the blue drum with a soft cloth can help if the scratches are not too deep, otherwise a new photoconductor is the only route.

Sep 06, 2009 | Epson Aculaser C1100 Printer

1 Answer

Converting from 3 prong to 4 prong


red and black go to the outer sides. white always goes in the middle and green just screws into the cabinet. so I would connect black to black white toi white and the blue to red and green to the cabinet

Jan 04, 2009 | Estate TEDX640JQ Electric Dryer

1 Answer

My tv is dark on the sides and light in the middle


Hi

ok you have defective RGB at the CRT board! the suspect is the variable resistor in green section and red section!

Thanks!

Dec 26, 2008 | Samsung TX-R2735 27" TV

1 Answer

How do i identify the wires of the lg 710s?


Vertical signal wire is yellow colour wire
Horizontal signal wire is White colour wire

Nov 22, 2008 | LG Studioworks 700S 17" CRT Monitor

2 Answers

Neff Fan Oven Element _U1661


hi there green and yellow is allways the earth connection which is usually the middle tag, what are the colours of the remaining wires and how many are there???

Feb 08, 2008 | Neff U1661 Double circotherm super...

Not finding what you are looking for?
Samsung HLM617W 61" Rear Projection Television Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...