Question about Fuji FinePix A360 Digital Camera

1 Answer

Cannot import hi, please cannot get pictures and videos to my new computer

Posted by on

  • dangerousali May 19, 2008

    Until now I've been able to transfer pictures from camera to computer simply by using USB cable. Now it doesn't work. I took camera & cable to Radio Shack & it worked there, so I know it's ok. I've checked/unplugged/re-plugged/jiggled every connection I can think of on my computer. Still no results. Any suggestions?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Fuji Master
  • 98,796 Answers

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo/video cataloging program.

Posted on Jan 04, 2013

4 Suggested Answers

Stonebraker
  • 167 Answers

SOURCE: my pictures wont import

Google's Picasa program should be able to get those images for you, http://picasa.google.com/ (it won't be picky like Canon's Software).

If worst comes to worst:
1. Open My Computer
2. Right click on the memory card
3. From the popup menu, click "Search"
4. In the left hand pane, you should see something reading "What do you want to search for"
5. Below that, click the item that reads, "pictures, music, video"
6. Start the search
7. Once the search is finished If your pictures and video appear copy and paste everything to your desktop (or wherever you want the photos)

Additionally, once you get everything off the card you should probably format it using the camera (see your instructions manual) to make sure you don't get that error again

Posted on Jan 05, 2008

pagebor
  • 2785 Answers

SOURCE: CAN NOT IMPORT PICTURS FROM HP Photosmart M415

have you tried picture alone

Posted on May 15, 2008

  • 11967 Answers

SOURCE: importing a video from my computer into my camera.

You can't.

Posted on May 04, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am getting duplicate photos when I import pictures into my computer


im trying to import pictures from my phone to pc but it keeps duplicating how to fix please please help

Sep 20, 2012 | Nikon Coolpix S600 Digital Camera

1 Answer

Downloading photos from Sony DSC-P100 to computer running Windows 7


Please check below for information about the compatibility of your Sony DSCP100 camera.

Windows 7
* Drivers:
The drivers needed to connect your Sony camera to a computer and transfer files are already included in the operating system.

Not Supported: The Windows 7 Starter edition is not supported.

Check here how to transfer video clips to a computer running a Windows operating system:
1. Turn on the computer.
2. While the camera power is off, connect it to the computer using the supplied USB cable.
3. Make sure the camera is using a fully charged battery pack or connected to an optional AC power adapter and that it is plugged into a working electrical outlet.

NOTE: Avoid using a battery pack with little remaining charge because transferring may fail or image data might be corrupted if the battery pack shuts down too soon.

4. Make sure media with the recorded video is inserted in the camera.
5. Turn on the camera.

NOTES:
On the LCD screen, a USB indicator will display during and after the communication session.
If this is the first time the camera has been connected to the computer, the computer should automatically install the appropriate USB driver at this time.

6. Transfer the pictures or videos to the computer using one of the following methods:
6.1 Use the Import pictures and videos option.
In the AutoPlay window, click Import Pictures and videos using Windows .
In the Import Pictures and Videos window, click Import Settings .
In the Import Settings window, click the Browse button.
Click to select the location on the computer where you want to copy the movie files (for example My Videos ).
Click the OK button.
In the Import Pictures and Videos dialog box, click the OK button.
Click the Import button.

6.2 Use Picture Motion Browser (PMB) software
Using PMB version 4.3 or older
Using PMB version 5.0 or later

Copy and paste the video files from the Removable Disk window that represents the camera.
a. Open the My Computer or Computer window on the computer.
b. In the My Computer or Computer window, double-click the icon that represents the camera.
c. Click to select the appropriate camera folder that contains the video or picture files you want to transfer.
c.1 The DCIM folder (if available) contains still picture .JPG, or .ARW files and .AVI video files.
c.2 The MP_ROOT folder (if available) contains standard and high-definition .MP4 video files.
c.3 The AVCHD folder (if available) contains high-definition .MTS video files.

NOTE: Depending on your camera and the type of footage recorded, not all the files or folders above may be displayed.
On the computer keyboard, press CTRL+C to copy the camera folder and its contents.
Browse to the location on the computer where you want to copy the picture or video files, such as the My Pictures or My Videos folder.
Press CTRL+V to paste the camera folder and its contents into the computer folder you selected in the above step.

NOTES:
* Movie player software must support the MPEG-4 format to playback standard or high definition .MP4 recordings.
* Movie player software must support the MPEG-4 AVC/H.264 format to playback high-definition .MTS recordings.
* Refer to the developer of your movie player software for information about file format compatibility.
* For the video to be viewable in the PMB software, the folder where the videos or pictures were saved must first be registered in the software. Information about how to register folders is available in the PMB Guide in the Help section of the software.



Hope this helps (remember to rating this answer and leave a testimonial comments).

Oct 11, 2011 | Sony Cyber-Shot DSC-P100 Digital Camera

1 Answer

The memory card is not showing my pictures when i plug my camera into my laptop


Hi,


Please follow the steps below for connecting the Camera to the Computer for transferring the images.

Turn the Camera ON.

Turn the Computer ON.

Make sure to Insert the Memory Stick in the Camera.

Set the USB CONNECT option in the Setup 2 Menu of the Camera to PTP. [Set the Mode dial of the Camera to Camera, press the Menu button, select SETUP-->SETUP2-->USB CONNECT-->PTP-->OK.]

Connect the Camera to the Computer using the supplied USB cable.

The Computer will automatically install the USB Driver for the Camera.

When the installation completes, an AutoPlay window will appear.

In the AutoPlay window, click the Import Pictures option.

In the Importing Pictures and Videos window, click the Import button.

If the USB connection from the camera is not recognized by the computer, disconnect the USB cable and repeat changing the USB CONNECT option to PictBridge, Mass Storage or Auto.

If the issue persists, try connecting to a different USB port on the Computer.

Try re-installing the USB Driver from the Device Manager.


Good Luck!

KenSolutions

Nov 23, 2010 | Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

In trying to download video from our cam corder (Sony DCR-SR85) to our PC we get the following message 'Document management information can not be located" and we are unable to download the video files....


Different ways to transfer video:
Transfer the video to the computer using one of the following methods:

Use the Import pictures and videos option.
    1. In the AutoPlay window, click Import Pictures and videos using Windows .
    2. In the Import Pictures and Videos window that appears, click Import Settings .
    3. In the Import Settings window, assign the location on the computer where you want to copy the picture and movie files.
      • Next to Import images to click the Browse button and then select the desired folder (for example, My Pictures ).
      • Next to Import videos to click the Browse button and then select the desired folder (for example, My Videos ).
    4. Click the OK button.
    5. In the Import Pictures and Videos dialog box, click the OK button.
    6. Click the Import button.

  • Use the supplied Handycam® Utility application.
    1. Start the Handycam Utility application bundled with the Sony® Picture Utility software.
    2. In the Handycam Utility window, click to the select the type of files you want to transfer: HD movies , SD movies or Pictures .
    3. Click the Import button.

  • Copy and paste the video files from the Removable Disk window that represents the camcorder.
    1. On the computer desktop, create a new folder.
    2. If the Removable Disc window is not showing, open the My Computer window and then click to select the Removable Disk icon.
    3. In the Removable Disk window, click to select all the folders and files listed.
    4. On the keyboard, press the CTRL+C keys to copy the folders and files.
    5. Open the new folder that you created.
    6. In the new folder, press the CTRL+V keys on the keyboard to paste the folders and files into the new folder.
    7. Rename the new folder.

Oct 21, 2010 | Cameras

4 Answers

Cannot transfer videos onto my computer. Took pictures/videos in HD


Hi I faced the same issue with VideoCam Suite 1.0, from some blog I found that the camcorder uses PAL but the software used NTSC, which is not compatable with each other, hence reinstalling a PAL version of VideoCam Suite should take care of the issue.
However I am still searching for a VideoCam Suite with PAL support.


Aug 26, 2009 | Cameras

1 Answer

Will not download pictures


Hi you need to Import to "My Pictures" Folder if you can see that option. As soon as you plug in the USB plug from your Camera to the Computer it should make a sound and and Import menu should pop up. It will ask what you want to do with the images. You will select Import to my Computer, If it gives you an option to save to "MY PICTURES" Select that option. If not just Import to your Computer and then Later go to "Pictures" in Windows and select RECENTLY CHANGED option. This will pull up the Pictures you JUST PUT ON THE COMPUTER. Hope this helps

May 05, 2009 | Kodak EASYSHARE M1063 Digital Camera

1 Answer

Cannot delete photo!


click the trsh button and click delete all to delete all pictures and delete one to delete the one picture yuo are on..........

Sep 20, 2008 | Panasonic Lumix DMC-FX7 Digital Camera

1 Answer

Olympus FE-230 - will not import certain video to computer


Make sure your not running the cable through a hub of any kind.
Plug it directly into a usb port on the computer.
Sometimes the hub can limit the bandwidth (speed)
and with video you need all you can get.
I'm assuming here that your computer is new enough to have the
2.0 usb standard.
Best of luck Paul

Jun 12, 2008 | Olympus FE-230 Digital Camera

Not finding what you are looking for?
Fuji FinePix A360 Digital Camera Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

kakima

Level 3 Expert

98796 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...