Question about Craftsman 17.5 hp 42 in. Deck Lawn Tractor - CA Model

1 Answer

Will not start fuse ok battery ok they said try new starter, its ok turn key on hear click Sound sounds llik up at carberator, AMP gauge gos negetive and starter will not ingage, belt for mower is disingaged seting on seat clutch disingaged. How can I now if it may be the switch or selinoid.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

I would try to jump the starter. Pos cable on the starter then ground out the neg, it the starter turns over that isnt it. then check the smaller wire going to your soleniod, when you turn your key to the start position it should have power. then check to see if there is power from the battery to your soleniod then with the key turned power from the soleniod to the starter.

Posted on Aug 20, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1997 Toyota Tacoma new battery, clamps,& fuses.wont turn over NO sounds when key is turned .lights are only thing working????? . What am I missing


Have you tried tapping on the starter then trying to start the vehicle may be a bad spot in starter usually if no sound when trying to start and new battery will mean the starter is no good . Starter can be found by following the positive cable off the battery.

Dec 03, 2016 | Toyota Cars & Trucks

1 Answer

Merc e320 1997 model,W210 engine wont start. Please help


If you hear a click while turning the key this would indicate low charge in battery any reading under 12 on a tester would have trouble starting other than that loose battery leads have you tried jumping if it starts with a jump this would indicate battery.

Oct 14, 2016 | Mercedes-Benz E320 Cars & Trucks

2 Answers

'03 Navigator will not start.


Sound Like Transmission Position Sensor ... a sensor determines when you are in Park when stopped...if not, wont start...

Other solution could be Fuse Relay...do you hear buzzing sound coming from fuse box. If so, feel which one is failing and replace. $6 at Autozone....

Mar 16, 2013 | 2003 Lincoln Navigator

2 Answers

2005 Altima won't start, hear clicking sound coming from fuse box,key stuck in ingintion,won;t turn over,tried to jump start.


the clicking that you hear is coming from the starter relay. sounds like your ignition starter switch or ignition lock cylinder is bad.

May 30, 2012 | 2005 Nissan Altima

1 Answer

When I turn the key on to start my Troy-Bilt RZT 50 zero turn mower, there is nothing. No ignition light, nothing. I have a new battery and I put a new fuse unit but still nothing. Help!


Do you hear a clicking sound???NO ?? Do you have the speed ?turning handles in the extrem OUT position? Is the ground cable connected to the engine block?? Is the Red cable connected to the + Positive post on the battery?? Is the BLACK cable connected to the - Negetive post on the battery?? Why did you need to replace the fuse? Is the battery charged??

If none of the above corrects the problem replace the ignition switch

May 02, 2011 | Mustang Rzt 50" Zero Turn Riding Lawn...

1 Answer

Won't start; hear clicking sound coming from fuse box; no lights; key stuck in ignition. Please help.


please check your battery condition.
clicking sound you hear is from the magnetic switch ***'y of the starter.
no lights & stuck ignition key is caused by a low power or bad battery.
hope this may help.

Jul 09, 2010 | 2003 Nissan Altima

1 Answer

How to see if my starter is good


Hi!!

First, check Starter FUSE and RELAY, if they are OK!! Follow this direccions to find out if your starter is busted.

When you turn the ignition key to the START position, if it cranks up (turns over), your STARTER IS OK, if it makes a CLICKING SOUND, the battery is weak, when you HEAR ONLY ONE CLICK, the starter selenoid IS GOOD, the starter may be the problem.

Good Luck!!

Mar 16, 2010 | 2003 Lexus ES 300

1 Answer

1999 Dodge intrepid tries to turn over but won't/can't. Everything turns on electronically that's supposed to, brand new battery.


clicking sound heard? starts fast then slows down as you crank over engine?ok try this --at the starter there is an electrical connection -- B+red wire and a smaller wire make sure these connections are tight. if ok proceed to next step--if you hear a low clicking sound when you turn the key and when trying to jump start the car still hear a click sound have someone tap on starter while you try to start it --- if car starts the starter solenoid is bad,anything more please write me back, Lee Davidian

Jan 13, 2010 | 1999 Dodge Intrepid

Not finding what you are looking for?
Craftsman 17.5 hp 42 in. Deck Lawn Tractor - CA Model Logo

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Garden Experts

Dean Gruber

Level 2 Expert

110 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

Are you a Craftsman Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...