Question about Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
SWITH OFF POWER AT SOCKET AND REMOVE
REMOVE BOTTOM PLATE IF COMPETENT TO DO SO REMOVE ROLLER ASSEMBLY REMOVE ONE SIDE OF BEARING COVER AND SLIDE OUT AXLE CLEAN BOTH BEARING COVERS OF DUST AND DEBRIS ALASO FIRST CHECK FOR ITEMS JAMMING BELT OR ROLLERS REFIT.
Posted on Aug 25, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
on the roller brush take it off and where the belt sits if that is scarred any way the belt will rub see if the roller is messed up i found if u use a piece of sandpaper and smooth it out a little it should be good.
Posted on Feb 06, 2008
There is no drive belt on this model - its a cylinder pull along model.
If there's a problem with the turbo brush you can flip open the base of it by removing the screws, check that the toothed belt is in place and there is no clogs of dirt between the turbine and the brush bar.
Posted on Apr 12, 2009
remove base cover by 3 'screws' 1/2 turn anti clockwise and clean well remove fibres replace cover and re try.
Posted on Sep 14, 2009
Ok 1st check that the roller is free to move otherwise it will stress the belt..next no sharps on roller guide or brush roll to cut into belt..Please leave feedback
Posted on Apr 08, 2010
Tips for a great answer:
Sep 23, 2014 | Dyson Bagless Upright Vacuum DC41 Animal
Jun 01, 2014 | Dyson DC28 Animal Bagless Upright Vacuum
Aug 29, 2011 | Dyson DC14 Animal Bagless Upright Cyclonic...
Jul 29, 2011 | Dyson DC27 Bagless Upright Vacuum
Mar 07, 2011 | Dyson DC07 Bagless Upright Cyclonic Vacuum
Feb 03, 2011 | Dyson DC17 Animal Bagless Upright Cyclonic...
Apr 23, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum
414 people viewed this question
Usually answered in minutes!