Question about Polaroid t1031 Digital Camera

1 Answer

Neither my software, nor computer will recognize my camera when I connect it by the USB. Neither will they recognize the SanDisk.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,153 Answers

I would suspect a corrupt SD card myself and be looking to format it on a computer (not in the camera)

I would also be taking a look here for any additional information that may be useful

http://www.fixya.com/support/r4247716-usb_device


Neither my software, nor computer - 8c34ca0.jpg

Posted on Aug 20, 2010

  • The answers by Project Nomad / bob_computer are to be considered copyright 2011 and property of

    R. Humpleby

    Use without prior "written permission" is no longer allowed.

    This property is no longer shared with Fixya and its associates / affiliates

    It's removal from puplic view is requested

    Reason. account termination.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot connect up SP800UZ to my computer.


If you mean that, even when you connected the Olympus USB cable correctly, the computer does not recognize the camera? If so, connect the camera to another computer to check if the camera or usb cable or the original computer is causing the problem. Often the computer does recognize the camera as a Removeable USB Device. You can see that when using e.g. the Windows Explorer. If the problem is only, that the installed Olympus software is not started, when connecting the camera to the computer, check the settings of the [ib] software by running it manually. Otherwise re-install the [ib] software.

May 20, 2011 | Olympus SP800UZ Digital Camera

1 Answer

Camera is connected with USB and I don't see software to install


The problem is that you need to install the software before you connect the camera for the computer to auto recognize it.

If you dont have a disk that came with the camera to install before connecting the usb cord, go to the internet and search for the manufacturers website and download your software instead.

Download the software to your computer and follow the prompts for installing it. Then connect your usb cable. if the computer does not auto recognize the camera after the softwares been installed then you have a problem.

Mar 27, 2011 | Cameras

1 Answer

I dont have sandisk driver for my sansa E260..i cant transfer songs..


Sansa Not Recognized: Try connecting it to the back of your computer or another computer the back straight to the motherboard this should be USB 2.0 and see if it will recognize it as sansa or Drive/removable drive. if it does then download the sansa update software and install it. Make sure you disconnect the sansa and connect it when asked. This will update your sansas firmware and add the Usb Mode. Try to connect it to your computer at home it should recognize.... link for update software (http://mp3support.sandisk.com/sansa/Installer/1082/SansaUpdaterInstall.exe) download to a flash drive much easier. Make sure USB mode is MSC
Recovery Mode may also allow your computer to recognize the sansa
lock your sansa hold in the rec key on the left at the same time push the menu/power button this will take you to recovery mode then connect to the computer Start the update software when finished disconnect.... Sync to upload songs to the sansa......Hope this works

Dec 01, 2010 | SanDisk Sansa e260 MP3 Player

1 Answer

My sanddisk won't connect to my computer what do i do?


Sansa Not Recognized: Try connecting it to another computer the back straight to the motherboard thIs should be USB 2.0 and see if it will recognize it as sansa or Drive/removable drive. if it does then download the sansa update software and install it. Make sure you disconnect the sansa and connect it when asked. This will update your sansas firmware and add the Usb Mode. Try to connect it to your computer at home it should recognize IF not try a laptop.... link for update software (http://mp3support.sandisk.com/sansa/Installer/1082/SansaUpdaterInstall.exe) download to a flash drive much easier. Make sure USB mode is MSC
Recovery Mode may also allow your computer to recognize the sansa

Jun 26, 2010 | SanDisk Sansa e250 MP3 Player

2 Answers

My computer doesn't recognise my sansa 260.


Sansa Not Recognized: Try connecting it to another computer the back straight to the motherboard ths should be USB 2.0 and see if it will recognize it as sansa or Drive/removable drive. if it does then download the sansa update software and install it. Make sure you disconnect the sansa and connect it when asked. This will update your sansas firmware and add the Usb Mode. Try to connect it to your computer at home it should recognize.... link for update software (http://mp3support.sandisk.com/sansa/Installer/1082/SansaUpdaterInstall.exe) download to a flash drive much easier. Make sure USB mode is MSC
Recovery Mode may also allow your computer to recognize the sansa
lock your sansa hold in the rec key on the left at the same time push the menu/power button this will take you to recovery mode then connect to the computer Start the update software when finished disconnect

Apr 08, 2010 | SanDisk Sansa e260 MP3 Player

1 Answer

My computer will not recognize my Sansa sandisk MP3 player. I tried to reset it, and when I get the "Please connect USB" message, it still won't recognize it.


My computer will not recognize my Sansa sandisk MP3 player. I tried to reset it, and when I get the "Please connect USB" message, it still won't recognize it.

Aug 26, 2009 | SanDisk Sansa c250 (2 GB) MP3 Player...

1 Answer

I'm trying to charge my Sansa MP3 player but am getting and error USB Device Not Recognized Help PLEASE!!!!


Try connecting it to another computer and see if it will recognize it as sansa or removable drive. if it does then download the sansa update software and install it. Make sure you disconnect the sansa and connect it when asked. This will update your sansa and add the Usb Mode. Try to connect it to your computer at home it should recognize.... link for update software (http://mp3support.sandisk.com/sansa/Installer/1082/SansaUpdaterInstall.exe) download to a flash drive much easier I used my friends labtop it worked USB 2.0

Apr 17, 2009 | SanDisk Sansa e260 MP3 Player

1 Answer

System update is not available


Try connecting it to another computer and see if it will recognize it as sansa or removable drive. if it does then download the sansa update software and install it. Make sure you disconnect the sansa and connect it when asked. This will update your sansa and add the Usb Mode. Try to connect it to your computer at home it should recognize.... link for update software (http://mp3support.sandisk.com/sansa/Installer/1082/SansaUpdaterInstall.exe) download to a flash drive much easier ..Make sure sansa usb mode is in msc

Apr 14, 2009 | SanDisk Sansa e260 MP3 Player

2 Answers

My macbook wont recognize my hp camera, i installed the software that came with it but it still wont even recognize that its even connected.


your camera should work fine with the built in iPhoto software, simply launch the program and connect your camera, you should be able to download your pictures immediately.

Feb 22, 2009 | Apple iMac 24" Desktop

2 Answers

Cruzer Scandisk 2.0 titanium


Hi, Not unless you are using Windows98, your PC should automatically recognize the SanDisk Cruzer Titanium as a "Removable Storage/Device". Driver is not required for Windows ME, W2k or XP. If for some reason the SanDisk Cruzer Titanium (non-U3 devices) is not recognizable, then perhaps it is not a problem with the PC but with the SanDisk. Pls try all other USB ports of your PC (front and back). The SanDisk website provides utilities/software for this kind of eventuality. They are Sansa Firmware Updater and Sansa Connect Recovery Tool. Both are available at http://www.sandisk.com/Retail/DriverDownloads.aspx. Pls be forwarned that some utilities can and will reset your SanDisk to default and any or all data can and may be deleted. Hope this be of some help/idea. Pls post back how things are or should you need additional information. Good luck and kind regards.

Sep 30, 2007 | SanDisk 1GB Cruzer Titanium USB Flash...

Not finding what you are looking for?
Polaroid t1031 Digital Camera Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Cameras Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a Polaroid Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...