Question about Office Equipment & Supplies

2 Answers

Have just bought and installer new print cartridges and they have not reset to full.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The following does an NVRAM reset on the PSC 2110 printer. It clears ALL settings including the apge count:

1) turn off and unplug printer
2) Press and hold BOTH the Cancel and Enter buttons
3) Plug printer back in
4) After it cycles, turn printer off and then back on.

Posted on Jun 24, 2008

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 33 Answers

Hi tgvbirss,

My first thought is that the actual ink carriage that your newly purchased inks rest in may be the problem. First thing to do is to check and make sure the new ink cartridges are snapped into the carriage firmly and that the contact circuits on the back are making contact. If you hear them click into place, that is usually a good indicator that they are going in properly.

You could also ask your printer to print a self-cleaning page by right-click on it in your 'Printers & Faxes' panel and selecting properties. Most printer models offer this function (not sure which type of printer you have). Doing this might remove any dried ink from the previous cartridges and allow the printer to properly gauge the ink level of the new ones.

Hope that helps.

Posted on May 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

We cannot get out printer to print. easyshare


we replaced printhead and it wants us to calibrate and replace ink color ink cartridge, and before we put the printhead in , it had 1/2 full color in cartridge

Jan 10, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

HP will not recognise new cartridge


The problem you are describing with the yellow cartridge sounds like ink starvation possibly due to a clogged print head or an air bubble in the print head. Since the machine is so new I would contact HP to get the print head replaced. As for the magenta cartridge, exchanging it for a new one at the store you bought it from should fix the problem. It sounds like the chip on the one you have is either damaged or wasn't set to read full ink levels.

May 29, 2009 | HP Officejet Pro L7680 All-In-One Printer

1 Answer

Installed new yellow print cartridge for HP printer, prompts to install new cartridge but my ink level says full


I have this same problem and some sites said to uninstall the software then download the software from the HP site and reinstall it. So I am giving that a try tonight

May 29, 2009 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Lexmark printer always want a new cartridge


What you need is to reset the ink level:
1) Goto the Lexmark Solution Center application.
2) Press button Maintenance>Install a new print cartridge, follow the instruction on screen. U may then have your new full ink level. Note: u only can reset to full level, cannot customize the level by your own.
Hope this help.

YBC (/\)

May 28, 2009 | Lexmark X2500 All-In-One Printer

1 Answer

Color Cartridge Has Stopped Working...Lexmark Z45 Printer


i think this a firmware issue of the printer..
try to flash a new compatible firmware .

May 12, 2009 | Lexmark Color Z45 InkJet

2 Answers

Lexmark X2550 ink cartridge refill


To get your printer to recognize the new cartridge; go to start - printer and faxes -right click on printer - preferences (printing preferences) -settings -load factory settings. Print test page Ctrl+P

-Mustafa

Mar 31, 2009 | Lexmark X2500 All-In-One Printer

1 Answer

Copier states to ''insert color cartridge''


When you installed the new cartridges, did it ask or display if you "installed a new ink cartridge" press the ok botton to rest the cartridge back to new. Then it will ask you to aline the cartridge and it will print a test print and ask you to place the print out on the glass. Do the same for the next cartridge..... I have one question, is this a new problem with the new cartridges????

Mar 24, 2009 | Office Equipment & Supplies

1 Answer

Changed ink cartridges cannot print alignment page, out of ink


You need to reset the ink level before the printer can print further, to do these please follow the following step:
1) Goto the Lexmark Solution Center application.
2) Press button Maintenance>Install a new print cartridge, follow the instruction on screen. U may then have your new full ink level. Note: u only can reset to full level, cannot customize the level by your own.
Then try again with printing alignment task.
Hope this help.

YBC (/\)

Feb 26, 2009 | Lexmark X2500 All-In-One Printer

1 Answer

Lexmark printer always want a new cartridge


What you need is to reset the ink level:
1) Goto the Lexmark Solution Center application.
2) Press button Maintenance>Install a new print cartridge, follow the instruction on screen. U may then have your new full ink level. Note: u only can reset to full level, cannot customize the level by your own.
Hope this help.

YBC (/\)

Feb 18, 2009 | Lexmark X2500 All-In-One Printer

1 Answer

Printer says cartridges full, computer says cartridges empty even though i have bought and installed new cartridges


Printer connection had come out of the computer port and I hadn't noticed, printer itself is stand alone so was printing photos OK but I couldn't print documents. Everything up and running once again and both printer and computer say cartridges are full.

Aug 17, 2008 | Kodak Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...