Question about Canon PIXMA MP130 All-In-One InkJet Printer

3 Answers

Canon Mx320 printing error 5200.How do I fix it?

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,961 Answers

Just remove the ink cartridge from the printer and clean the surface contact using a cotton moistened dipped in an alcohol .
Return back the cartridge and try to print again.

Try also to Press and Hold the STOP/RESET button until printer restart. Release the button when to completely initialize the printer

Posted on Aug 20, 2010

  • 2 more comments 
  • emyonweb Aug 20, 2010

    Already done that. Not working. Maybe useful for other types of printers. Thanks for trying.

  • Danilo Baraquiel
    Danilo Baraquiel May 17, 2011

    Please
    reset the printer

    1. Turn off your printer
    2. Press
    and hold the
    STOP/RESET button
    3. Press and hold Power ON button
    4. While
    holding the Power ON button, release the STOP/RESET button
    5. While
    holding still the Power ON button, press twice the STOP/RESET button
    6.

    Release the Power ON button
    7. Wait until it display an "idle"
    message. It will take about a minute.
    8. When "idle" appear, open
    the top cover to expose the cartridges.
    9. Lift up the cover for
    cartridge holder and take out both the black and color cartridges
    10.
    Return the cover of cartridge holder and turn off the printer
    11.
    Return the top cover and turn on the printer again
    12. After the
    printer initialize, return the cartridges.

    1. Press and Hold the
    STOP/RESET button and wait until it self restart.
    2. Release the
    STOP/RESET button the the printer is restarting.
    3. Wait for a few
    seconds

  • anna Sep 11, 2013

    God bless you!!!It fixed following your intstructions!!

  • Michelle Schmitt
    Michelle Schmitt Oct 22, 2013

    THANK YOU SO VERY MUCH!! Your the BEST!! My printer is printing again.

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My cannon MX320 has come up with an error 5200. When i follow the restart procedures posted it does not fix the problem. The paper is no being feed through the printer but when it comes out there is no ink on the paper?

Posted on Aug 24, 2011

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Printer won't take photo papper it keeps saying no papper.

Posted on Aug 31, 2010

  • anna Sep 11, 2013

    God bless you!!!It fixed!!!

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

alpug
  • 1961 Answers

SOURCE: i have a canon mx320 printer and Im getting a 5200

Fix it be resetting the printer

1. Turn off your printer
2. Press and hold the STOP/RESET button
3. Press and hold Power ON button
4. While holding the Power ON button, release the STOP/RESET button
5. While holding still the Power ON button, press twice the STOP/RESET button
6. Release the Power ON button
7. Wait until it display an "idle" message. It will take about a minute.
8. When "idle" appear, open the top cover to expose the cartridges.
9. Lift up the cover for cartridge holder and take out both the black and color cartridges
10. Return the cover of cartridge holder and turn off the printer
11. Return the top cover and turn on the printer again
12. After the printer initialize, return the cartridges.

1. Press and Hold the STOP/RESET button and wait until it self restart.
2. Release the STOP/RESET button the the printer is restarting.
3. Wait for a few seconds

Posted on Oct 22, 2010

  • 1894 Answers

SOURCE: Canon Printed LBP 5200 Error Code E000

This error indicates fuser error, its not heating up.

Posted on Aug 10, 2008

alpug
  • 1961 Answers

SOURCE: Canon MX320 Printer getting code

Please reset the printer

1. Turn off your printer
2. Press and hold the STOP/RESET button
3. Press and hold Power ON button
4. While holding the Power ON button, release the STOP/RESET button
5. While holding still the Power ON button, press twice the STOP/RESET button
6. Release the Power ON button
7. Wait until it display an "idle" message. It will take about a minute.
8. When "idle" appear, open the top cover to expose the cartridges.
9. Lift up the cover for cartridge holder and take out both the black and color cartridges
10. Return the cover of cartridge holder and turn off the printer
11. Return the top cover and turn on the printer again
12. After the printer initialize, return the cartridges.

1. Press and Hold the STOP/RESET button and wait until it self restart.
2. Release the STOP/RESET button the the printer is restarting.
3. Wait for a few seconds

Posted on Oct 22, 2010

jay767
  • 386 Answers

SOURCE: my canon mx320 says error 5200

Hi Good day!!! Do this steps
1. Turn off printer
2. Open up the top cover and move the print head to the center
3. remove all cartridges and then turn back on wait a few seconds now your printer will find the missing cartridges now put it back one at a time nice and slow make sure you insert the cartridges properly after that close the cover and see if your printer is back to normal.
Hope my solution helps you
Thank you for using FixYa
Don't forget to vote

Posted on Nov 05, 2010

  • 2 Answers

SOURCE: canon mx320 printer getting code

I have a canon Mx320 and I am getting the error 5200 how do I fix it ?

Posted on Aug 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannon Printer mx320 error 5200 wont' restart


Error 5200 unfortunately is a Print head overheat error. Whatever you try to do to fix it will not work unless you replace the print and the main logic board. These two parts HAVE to be replaced as a pair to get the machine to work. However the costs are often more than the machine is worth. To be honest i would scrap it and by another. Its quite an uncommon fault but have seen it before (I am a Canon engineer)

May 08, 2012 | Canon PIXMA MX320 Color USB InkJet Printer

1 Answer

Canon mx320 printer getting code error 5200


I have a canon Mx320 and I am getting the error 5200 how do I fix it ?

Aug 11, 2011 | Canon PIXMA MX320 Color USB InkJet Printer

1 Answer

Canon printer mx320 shows error 5200


This is not straightforward. The error refers to a rise in temperature of the print head. It can however to infuenced by the state of the cartridges. Are they recycled ones? if so i would replace them with genuine ones. To keep cost down just replace one of them at a time. See what happens. Also clean the contacts in the carriage and indeed on the back of the cartridges. If the problem is still there then it may be a faulty logic board and with the low cost of the machine ,its probably not worth a repair.


Good luck.

Jul 21, 2011 | Canon PIXMA MX320 Color USB InkJet Printer

1 Answer

My print is Canon MX320. I just changed a new ink, but the error 5200 occured. Do you know what happened? Thanks.


Error 5200 indicates that the print head temperature has exceeded the specified value. Turn off the printer and then turn on, if error still persist replace ink cartridge or print head.

Jan 30, 2011 | Canon Office Equipment & Supplies

1 Answer

Error no 5200 occurred in canon mx 328


the printer cannot detect the cartridge. remove the cartridge and clean the surface with clothe moistened with alcohol. then return it back
restart the printer and do print jobs
If error appears press and hold stop reset button and wait for the printer to self restart before releasing the button.

Jan 24, 2011 | Canon PIXMA MX320 Color USB InkJet Printer

1 Answer

I have a canon mx320 and an error keeps appearing 5200 can someone help?


faulty printer head.....

please carry out all recommended cleaning,
if this fails then you need a new printer,

Nov 05, 2010 | Canon PIXMA MX320 Color USB InkJet Printer

1 Answer

My canon mx320 says error 5200


Hi Good day!!! Do this steps
1. Turn off printer
2. Open up the top cover and move the print head to the center
3. remove all cartridges and then turn back on wait a few seconds now your printer will find the missing cartridges now put it back one at a time nice and slow make sure you insert the cartridges properly after that close the cover and see if your printer is back to normal.
Hope my solution helps you
Thank you for using FixYa
Don't forget to vote

Nov 05, 2010 | Canon PIXMA MX320 Color USB InkJet Printer

Not finding what you are looking for?
Canon PIXMA MP130 All-In-One InkJet Printer Logo

21,680 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1975 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...