Question about Cameras

1 Answer

It is wriiten dat memory card locked and card error.wat 2 do?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

OK, if the memory card itself is locked, you might sometimes get this error code. All you need to do is to take out the memory card and switch the lever on the left side to the unlock.

it is wriiten dat memory - 6c99e31.jpg

If the error is still displayed after you did the above, you might want to try the card in another camera.

If the card works in another camera . the problem is with your card reader in your camera.

If you open you sd slot and look inside with a sharp light , you should be able to see on the left side of the slot there is a little copper or spring steel lever switch. This switch work as follows:

1. When no card is inserted / no write protection , the switch is open and thus the protection is off.
2. When locked card is inserted , the tab is depressed and tells the camera that the card is lock.

Contrary to popular belief ,the little tab on the sd card is not an electronic switch and does not physically influence the card operation itself. If you put a locked card into a camera without a sd lock switch , you would still be able to use the card normally.

It is incredible difficult to fix this switch because of space limitations in the sd card. Look into the sd slot and if you can see the switch , use a needle to pull the little tab down toward the base of the camera by about 2mm or until it works being careful not to bend it.

If this does not resolve your problem , there might be a short in the switch circuit and the camera will need to be disassembled to resolve this error. This should cost no more than $50.

Please feel free to contact me if you need further information

Kind regards
Andrea

Posted on Aug 20, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I hv windows7 ultimate in my computer bt its activation has expired. On desktop its written dat this copy of window is nt genuine. So wat to do further to get my system error free. Kindly suggest any...


i hv windows7 ultimate in my computer bt its activation has expired. On desktop its written dat this copy of window is nt genuine. So wat to do further to get my system error free. Kindly suggest any solution so dat i may nt loss my data and free. inf me on y email shin_dragon_pke@yahoo.com help is need ASAP

Jul 02, 2010 | Computers & Internet

1 Answer

Write protected error


IN THAT FLASH DRIVE JUST CHECK FOR ANY SYMBOL DAT A LOCK MARK AND MAKE SURE THAT IT UNLOCKD BEFORE U PUT IT INTO YOUR COMPUTER

Apr 16, 2010 | Electronics - Others

1 Answer

Actually i and my friend went to buy a phone?.we were having 2 choice?N91 and NOKIA 9300i? we first went for N91?but what happened was that?ven v on d phn it was alright but ven we entered in d camera is...


I have a LG U880 which i perchased from uk when i come in india it shows USIM LOCKED.How can i solved this problem plz any body help me or ULT PRO team help me its very urgent.Thanks in advance.

Nov 05, 2009 | Nokia N91 Cellular Phone

1 Answer

Downloaded kernel but still says Couldn't find DS_MENU.DAT


The file names are in some cases capital sensitive. Some card need the file name named like this _DS_MENU.dat or like this
_DS_MENU.DAT

Also try to reformat the memory card using fat32 and then put the new kerel files to memory card.

It's also better to use YSMenu, because the R4DS flash card adaptors wont get updated firmware anymore so as the support has stopped.

Or buy the Hyper-R4i card, this card has reprogrammable rom so that you can use it with a Nintendo DSi that is running on firmware v1.4 as well.

Aug 29, 2009 | Nintendo DS Lite Console

1 Answer

Memory card not detected


your card is automatically locked and it is only unlock by using memory card unlocker device but it also format your mmc.other than this you have no choice to open memory card.yes you can use recovery software for recover your important files

Jul 30, 2009 | Electronics - Others

1 Answer

How 2 format d phone memory


just **** it and throw it into ur *****

Jul 21, 2008 | Nokia N73 Cellular Phone

1 Answer

Error openx menu dat error


Take all the memory contents out to your computer as backup, format your memory to fat32 and put all the memory contents again to the memory from your computer. If not working try downloading the card system files from the card manufacturer site, these files are needed to run the card just like the operative system in your PC, if these files get corrupt or deleted the card wont work.

Mar 30, 2008 | Nintendo DS Lite Console

1 Answer

Sandisk memory card


Has this card EVER worked with your camera? Since you didn't mention the model number of the Canon, it's possible that you have a compatiblity issue here. Most 4GB SD cards these days are actually SDHC cards, which store memory differently (in sectors, like a hard disc drive, rather than bytes, like your main memory). All SDHC compatible cameras also support SD cards, but cameras sold before the SDHC standard was created will not support SDHC memory cards.

There's a chance that Canon has a firmware upgrade to solve this. You would have to look on the Canon USA web site for this, based on the model number of your camera.

Jan 20, 2008 | Cameras

Not finding what you are looking for?
Cameras Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...