- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have to change the time on the phone system by logging in as administrator. Once it is changed it will update the time on all of the phones at the same time. Remote IP phones are a little different in that they only sometimes get the correct time from the system when they are booted and connect to the system.
According to the effectiveness of the past. To update the firmware for gigaset A580ip not require you to download it, just do the update directly through gigaset on-line , follow the steps below.
1> Menu » Settings » Base » Firmware Update 2> Enter base station system PIN (default setting: 0000) 3> Press the display key "Yes" to start the download If your firmware is already up to date, the handset informs you. No action is needed then.
How to check for your firmware version:
Via Web Configurator: Status » Firmware version » The first 5 digits indicate the number of the firmware update
If you are in a call (> 8 sec): Menu » Service-Info » Scroll to list entry number 4. The first 5 digits indicate the number of the firmware update
The Voicemail isn't in the phone itself, but usually in the phone system. You will need to contact your system administrator or telephone vendor to have the mailbox reset. While they're at it, have them update the username.
you might need to update the driver or reinstall it here is a general look at the drivers and how to update them if your computer came with a motherboard disc the drivers could be on it click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x right click to reinstall drivers or if you can see your usb but its not working ports(com&lpt)right click update driver hope this helps
This must be done on the phone system as the administrator. For 6.0 software go to System-wide settings, set date and time, and you can set it there. For 5.0 and older, go to Tab to it, System configuration, system settings, date and time. Once the time has been set on the phone system the date is updated instantly on the phones (even before your browser finished loading the next page).
Are you attempting to upgrade the firmware on the phone, or the phone system itself?
We have a SX-200 ICP and are currently in the process of upgrading so our teleworkers can use newer phones than the 5220's. It requires you have a current support agreement with your vendor because you have to be able to log into Mitel's Application Management Center (http://www.mitel-amc.com).
you need to log into the management console of the mitel 3300 if this is the system that you have and then click on the "group administration tool" option, you may or may not have access to this depending on your security setup on the system. Then it is self explanitory you see the change time option. All sets will update in seconds.
uninstall the software and drivers from add/remove programs in control panel, goto www.samsung.com and search for your model of phone, then download centre, then download the PC Studio from there, its more updated on the site. Also make sure your bluetooth is switched off and that when you connect the phone it is set to PC studio and not mass storage or media player.