Question about LG WM-12230FB Front Load Washer

1 Answer

Hi. My LG 7.5kg Front Loader Washing Machine WD-1049C does not spin. It washes the clothes ok but fails to go into the spin cycle. The fault code UE comes up if i let it bumble through the cycle long enough. I have attempted the trouble shooting techniques with no luck.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Im soory to have to tell you this but i belive it is mostlikley the motor control board and it is worth a couple hundred dollars plus lobour it is the board benith the durm in the front right corner i hope im wrong on this i bet your clother are stuck in there with the door locked full of water there is a trick to draim then unlock the door by pushing in 2 buttons at the some time but i cant think of it right now ill try to post that trick if i recall it latter hope this helped

Posted on Aug 20, 2010

  • marvin1969 Jan 07, 2011

    Im sorry but my opinion is to dump the machine and get a new one.
    This seems to be a very common problem so unless your machine is still under warranty (2 years from date of purchase) it would probable be cheaper to buy a new machine

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the lint collector on LG 7.5g model WD 1049C Front Loader washing machine.


The combo washer/dryer doesn't have a lint collector. Air is circulated through a condensate tube and is washed down during each drying cycle.

Jun 16, 2011 | Washing Machines

1 Answer

I have an lg wm1814cw front loader with a ue code


Probably the pump filter is blocked.Make sure the machine is empty...Access filter via small door at floor level. Unscrew the filter cap, and clean filter. check that there isn't a coin stopping the impeller vanes. ...When you take the cap off, any water left in machine will flow out!! Leaning the machine back can help.....Good luck...Nomess

May 16, 2010 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

Please help! My samsung 7kg J845 front loader keeps flashing UE on the error code (spin cycle) and I can't open the door. Sarah


Hi, I have the same washing machine and it flashes UE on the error code during spin cycle when I have one thing in there, or if the clothes are uneven. I usually have to wait until the lock light goes out, re-arrange the clothes and continue spin cycle. If it is just one item in there, I usually have to manually wring it out as it will keep saying error if I keep trying to spin.

Oct 22, 2009 | Samsung WF337AA Front Load Washer

2 Answers

Error Message and Tub not spinning


UE is likely an unbalanced load or load is too large. Reduce the size of the load and your issue should be resolved.

Jul 21, 2009 | LG WM-2277HW Front Load Washer

2 Answers

Error display "CL" - what to do?


THe child lock is on. Mine came on for some random reason. On my LG front loader there is a button on the right hand side with a cartoony picture of a child and a padlock. Press this.

Jul 04, 2008 | LG WD-1280FHD Front Load Washer

3 Answers

Samsung P1053S error code UE


The UE is an onbalanced load fault code.. Unplug the machine to clear the code.. leave it unplugged for about 10 mins and try to run it empty.  If it persists you would be advised to contact a service technician.  Bust of luck

May 26, 2008 | Samsung WF203ANW Front Load Washer

Not finding what you are looking for?
LG WM-12230FB Front Load Washer Logo

973 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...