Question about NorStar Meridian M7310 Phone

1 Answer

I need to customize 9 external telco lines on a m7324,I want certain phone numbers assigned to certain buttons,why can't this be done? I try to assign in the order I need, but when I jump out of program mode and check the buttons with feature*0, they all are hosed up,not in the order in which I need them.. Is there something I'm missing. Dang Canadians anyway.. I even tried to program the buttons, one site said hit feature*1 to move external numbers to certain buttons. I get external auto dial?

Posted by on

  • spogle Aug 21, 2010

    Very helpful, thank you.That explains alot..

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • NorStar Master
  • 860 Answers

Unfortunatly, when in system programming you can't assign line order. It would make things easier if you could. In stead Nortel uses a user function to move lines from one button to another.To move the line/s press feature *81, press the line you want to move then press the button you want to move it to.The 2 buttons that were pressed will be exchanged.when finished press the Rls key. The down side is that it's done on a per set basis, so depending on how many phones you wan't to change your could be in for a busy day.

Posted on Aug 20, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to assign a dn number to M7324


press Feature *0 (button inquiry) then press the intercom key.

When a set is installed it automatically gets an intercom #

Mar 19, 2014 | NorStar M7324 Telephone

1 Answer

How do i forward calls to an outside line on Nortel M7324


You can forward an extension that is not used at all, and has the lines assigned to ring that you want to forward to an outside number. In programming have the extensions set to forward on busy to the external number using 9+ the number desired. When you leave for the afternoon, take the handset off the phone, and replace it when you return. NOTE THIS EXTENSION MUST NOT BE USED BY ANYONE -- IF THIS EXTENSION IS BEING USED AND A LINE RINGS IN IT WILL BE FORWARDED OUT.

Mar 19, 2013 | NorStar M7324 Telephone

1 Answer

Want to assign another extension to access another extensions voicemail box on a Norstar CIS system


Configuration/Sets/BBB/LineAccess/LineAssignment:
Assign the Line XXX to BBB as Appear and Ring or Ring Only (on intercom key)

Now the line rings on both sets

Administration/Capabilities/Sets/ AAA & BBB:
-Change AAA\'s Forward No Answer Ring count to 4 rings
-Change BBB\'s Forward No Answer Ring count to 3 rings
-Obviously make sure the Forward No Answer is pointing to the DN of the voice mail system on both sets
-Make sure Forward Busy is set to Non on both sets

Because the ring count is shorter on BBB all calls will dump in the mailbox of BBB

Nov 30, 2012 | NorStar M7324 Telephone

1 Answer

Program personal speed dial numbers on a NorStar M7324 Telephone


For external numbers press FEATURE *1, then press the button you want to store the number on, then enter the phone number using the dialpad.
For internal numbers press FEATURE *2, then press the button you want to store the number on, then enter the extension number using the dialpad.
To determine what is currently programmed on a button, press FEATURE *0, then the button to identify and the display will show what feature or autodial number is programmed on the button. If the button is a line button or line pool button, you will not be able to clear it through user level button programming. System level programming must be accessed to change line appearances.

Mar 02, 2011 | NorStar M7324 Telephone

1 Answer

How do i make all lines ring at certain desks for a norstar m7324 phone?


Programming2_bing.gif is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt,
press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you wish to program ringing on.
Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear only
press the Chng key till it says appear & ring
press next key (lower right arrow)
The display should say line 002: appear only
repeat the procedure the same as line 001 for the remaining ringing lines

press the release key when finished

Apr 21, 2010 | NorStar M7324 Telephone

1 Answer

We have nortel t7316 phones in our office. one


Programming is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt,
press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you wish to program ringing on.
Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear & ring
press the Chng key till it says appear only
press next key (lower right arrow)
The display should say line 002: appear & ring
repeat the procedure the same as line 001 for the remaining ringing lines

press the release key when finished

Apr 16, 2010 | NorStar T7316E Corded Phone

1 Answer

Power went off in our office over the weekend. Now my phone doesn't ring on all the incoming lines. Help!?


Programming is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear only
press the Chng key till it says appear & ring
press next key (lower right arrow)
The display should say line 002: appear only
repeat the procedure the same as line 001 for the remaining ringing lines

press the release key when finished

Oct 27, 2009 | NorStar M7324 Telephone

1 Answer

Old reception phone now regular office - reprogram


Programming is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear& ring
press the Chng key till it says appear only
press next key (lower right arrow)
The display should say line 002: appear &ring
repeat the procedure the same as line 001 for the remaining ringing lines

press the release key when finished

Oct 26, 2009 | NorStar M7324 Telephone

1 Answer

Only certain lines ring on certain phones


Programming2.gif is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS.
The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you wish to program ringing on.
Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear& ring2.gif
press next key (lower right arrow)til you see the line port number you wish to program (004)
The display should say line 0xx: appear only
press the Chng key till it says appear & ring

press the release key when finished

Oct 07, 2009 | NorStar M7310 Corded Phone

1 Answer

Line 3 and 4 are not programmed


You need to go into main programming of the system, and set the phone to access those lines. First ID the 2 new extensions. Do this by going to the phone, and pressing the Feature Key "Button with a little black globe", * and 0. then press the intercom button. This will show you the extension number. Press release "Red button with the phone and arrow downward". Then Press feature key "Button with the black Globe" "**266344" and again "**266344" go to terminals and sets. next to the buttons, you will see triangles , 3 for a while and 4 some times. The keys just next to them are your scrolling and enter keys. Scroll to "Terminals and Sets", press the enter button "Top right triangle" and enter in the extension and enter. then scroll to Line Access, enter, line Assignment. For each line, you have to change it to either Appear and ring, appr or unassigned. Set to appear and ring or appr. Do is for each extension to want to have acces to those lines.

Apr 27, 2007 | NorStar BCM-M7324 Corded Phone...

Not finding what you are looking for?
NorStar Meridian M7310 Phone Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...