Question about Graco Snugride

1 Answer

I can't remove the canopy on my graco snug ride car seat to wash it. I'm having trouble separating the two parts to get the material off.

Posted by on

  • Kim S-B Mar 20, 2016

    Thumbs on bottom of canopy strap, bend upward a little, then pull apart. Saw it on YouTube.

  • Maruska Lopez
    Maruska Lopez Dec 04, 2016

    Wud u send us the link where.u saw it.plz

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 903 Answers

The two plastic pieces clip together inside the fabric of the canopy, but if you push the fabric all the way to one side, you can expose the latch where the two pieces meet. The two pieces are identical, so you can push in on the tab on either piece to separate them. You have to push firmly, but they should separate easily.

Once you've washed the canopy, just thread one of the plastic pieces through the canopy and snap the two back together by sliding them together.

Hope that helps!

Posted on Oct 17, 2010

  • 4 more comments 
  • Heidishamp Dec 11, 2010

    I wasn't strong enough to pull it apart either, so I stepped on one end and pulled on the other..it worked! And it did not break.

  • rose_aie Jan 14, 2011

    I couldn't push the snaps in any way to unclip, because they are so snug there is no give. I tried using a screwdriver and a butterknife on the clips- no go. I just had to gently but firmly pull and they came apart nicely.

  • Roxy May 19, 2012

    Heidishamp,

    Thank you soooo much!!!! Your solution to step on one end and pull was the best suggestion thus far! I was getting so frustrated and your answer eased so much unnecessary stress. I am so thankful for your post.

  • ldy_wolf
    ldy_wolf Aug 30, 2012

    This helped me out too! Thank you so much!!:)

  • djbids
    djbids Sep 03, 2012

    Thank you. I tried and tried then just tugged hard. Nice to know you didn't have press both sides

  • Alissa Danae Oct 12, 2013

    Thank you gggg! This who.e time I thought it didn't even come off, and then when I figured out it did I didn't know which clip to push on! I went 9months without washing it and am sooo happy I can finally wash it the rest of it! Lol, blonde moment!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was given a car seat with two bases and need to know if they have been recalled before I have my new baby! Can't find a simple website to put in model numbers to check


just go to the Graco Website! :>)

Graco Harness Buckle Recall

Additional information

Graco recalls more than 25,000 car seats - CNN.com

www.cnn.com/2017/05/24/health/graco-car-seat-recall/index.html
  1. Cached
May 25, 2017 - Graco is recalling more than 25000 My Ride 65 car seats that might not adequately restrain children during a crash.

Safety recalls, notices, and testing for child car seats - Canada.ca

https://www.canada.ca/en/.../road/.../safety-recalls-notices-testing-child-car-seats.html
  1. Cached
May 25, 2017 - Includes: the recalls database; the defect complaint form; consumer information ... Graco My Ride 65 Car Seat - Non-Compliance with Webbing ...

Graco recalls My Ride 65 car seats in Canada for restraint defect ...

www.cbc.ca/news/business/graco-my-ride-65-recall-1.4129604 May 24, 2017 - Graco's Canadian division is recalling 1393 car seats with potentially defective harness restraints.

Graco recalls car seats, says webbing may not hold child in crash ...

https://www.thestar.com > News > Canada
  1. Cached
May 25, 2017 - Recall covers "My Ride 65" seats which were made between May 14, 2014 and July 30, 2014.

Jun 05, 2017 | Lands Phones

1 Answer

How do you separate the two parts of the plastic to remove canopy on graco snug ride car seat?


There are two styles for the Graco Snugrides. Older canopies simply have a plastic "claw" the you pull away from the seat where the hinge of the handle is located.
Newer seats have a button on the side of the seat where the canopy attaches to the seat (also near the hinge of the handle).
I hope that makes sense.

Jul 12, 2014 | Baby Gear

1 Answer

Install graco snugride to a graco stroller


Fitting your Graco Snug Ride infant seat into a Graco stroller is usually easy to do -- the exact instructions just depend on which stroller you have. Typically, all you have to do is fold the stroller's canopy back, recline the seat (if it reclines), and snap the car seat in (backwards -- facing the rear of the stroller). You can hear it lock in place when it's in correctly. Your stroller's manual will have specific instructions, and if you don't have the manual you can find it online.

Which Graco stroller do you have?

Nov 24, 2009 | Graco Snugride

2 Answers

How do I remove the canopy from evenflo infant carrier?


use a tiny flat-head screw driver to pull outwards on the tab (this is a blue plastic tab on mine) that holds the white plastic u-shaped (canopy part) in. I didnt think it would be this difficult but it is... the graco ones are much easier to take off to wash.

Apr 18, 2009 | Evenflo Embrace

1 Answer

Taking apart the canopy to wash.


you have to unhook the tabs for the canopy that is located by th button that pushes the carrying handle back

Mar 12, 2009 | Graco Infant SafeSeat (Step 1) 8A05RXY in...

1 Answer

Dismantleing canopy


If this is for the Graco Snugride (I have the Windsor model from the Quattro Travel System), this will work:


1. Push the Graco canopy to one side, exposing the plastic support bars that hold the canopy in place.

2. The center of the support is where the canopy comes apart. Using both hands, pull the canopy support
bar apart (as if you were playing tug-of-war). It's best to grab the curved ends and pull HARD (and point it away to the side so that you don't hit your face).

3. Once the support bars are apart, remove the old Graco canopy and slip on the new/freshly washed canopy.

4. Secure the support bars by snapping them shut, and then slide the canopy into place.

Aug 26, 2008 | Graco SnugRide - Clover

1 Answer

Graco snug ride car seat model #7270BIA


Best bet is to give Graco a call. 800-345-4109 I have done it before, you just have to gauge that it looks right. Put on the cover, fit the top (head) part first, then make sure the sides are on good then the bottom (feet) then you need to pull the straps through the slits to cover the shoulders, slide on the chest buckle pieces. Do you still have your manual? I would expcet them to have a diagram of this. :)

Aug 01, 2008 | Graco SnugRide - Giselle Infant Car Seat

1 Answer

I have a Graco infant car seat and want to remove the padded seat cover to place in the laundry. There are two elastics on either side of the car seat that help secure it to the sides of the handle. I...


What model do you have?

You can call graco at: Graco Customer Service is available Monday through Friday, 8am to 5pm Eastern Time.
1-800-345-4109 (US)

Ensure you do NOT wash the straps/harness, as it will make it unsafe and you will need to replace it.


They also have an online manual fi that will assist you. I checked my seat, and it is an older snug ride with no straps.

Thanks
:)

Apr 30, 2008 | Graco SnugRide - Giselle Infant Car Seat

1 Answer

How to install graco seat in 99 jimmy


i think the snug rides are rear facing only. if it pulls out of a base and has a carrying handle. its rear facing only.

Mar 02, 2008 | Graco SnugRide - Clover

1 Answer

Washing canopy on Graco Snugride


if the wash is hot you might melt the plastic parts

Feb 28, 2008 | Graco SnugRide 8649

Not finding what you are looking for?
Graco Snugride Logo

6,082 people viewed this question

Ask a Question

Usually answered in minutes!

Top Graco Baby Gear Experts

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

john milligan

Level 3 Expert

512 Answers

Are you a Graco Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...