Question about Packard Bell (160248-01) Computer Speakers

Open Question

Would like to know power requirement for these speakers. part number on speakers is SPK 229E, PB5W4oL3CZ7. would like to "hack" them for use on another PC. All due respect. please let me know if this is inappropriate!

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a power acoustik subwoofer, how do I know if the amp at the back of the round tube works the12" speaker wrks 500w voice coil 2, 89db low Q Driver. know it's for car's but I use it with tv spk


the shown photo is a bit confusing too me , clearly this is an automotive speaker , but in the photo there is clearly a home power cord shown , is this power cord connected anywhere on this speaker ? as if it is , id be afraid that amp has received home power and not car power , as the two are not the same and have tremendous differences and would be quite damaging to this amp possibly unrepairable damage

Feb 19, 2016 | Power Acoustik Car Audio & Video

1 Answer

SPK-VELO2 power supply unavailable


Go here: http://www.audio-unlimited.com/support and ask them. They have live chat to answer questions like this. If they can't supply you with a replacement you could ask them for the specs to guide you when selecting a supply. These include the current (in milliamps or amps required by the unit, and the size of power connector that will fit. Without this info no one could help you other than someone who is familiar with them.

Apr 13, 2013 | Cables Unlimited SPK-VELO2 Audio Unlimited...

1 Answer

Not enough audio in some noisy conditions


Get powered, external speakers. Connect them to either the variable audio out, or the headphone connection. A decent set of computer speakers should do nicely.

Something like these
http://www.geeks.com/details.asp?invtid=980-000354-R&cat=SPK
or these
http://www.geeks.com/details.asp?invtid=970114-0403-PB-R&cat=SPK

Jul 04, 2011 | Televison & Video

3 Answers

Samsung s 3310 speaker/ringer solution


...samsung s3310 but has no speaker problem pl solve this ear speaker fault plz help s3310 spk no working sam 3310 ear spk is ok but no sound ,i hope is head fone...

Feb 09, 2011 | Cell Phones

1 Answer

Can I hook up 2 lanzar opti1532d subs to a kicker kx 1200.1 or do I need a bigger amp, its 1ohm stable an the birth sheet says 1390 but with 14+ it does 1400rms...


Yes you Can. run them bridged parallel. meaning on the amp where the speaker wires attach there should be labeled with a "+" and "-" with a line drawn to show which terminals to hook the bridge wires up to. bridging takes power from both sides of the amp and puts it into one strong signal on half the wires. from there run your "+" wire to the first "+" on your first speaker. run your second wire from "+" on spk 1 to "+" on spk 2. repeat process from "-" on amp to "-" on first speaker and then to second speaker. __ ' a'"+"________"+"_______+ Good luck, may the force
/ ' 'm'"-" spk spk be with you!
bridged \ '__ ' '"-" ________"-"_______"-"

this will get you the most sound from the amp. if using 4 ohms speakere you will be running a 2 ohm load bridged.

Dec 23, 2010 | Lanzar OPTI1532D Car Subwoofer

1 Answer

I need the diagram for 1993 honda accord for radio i am installing a jvc cd player and i dont have the right adapter so i cut the origanal plug and now need to know the color codes for the wiring


this the wiring for that car--
constant power-white/green
ignition--white with red
ground-black
dimmer-red/black
left front spk-blue with green-+
left front spk-ghray/black -
right front spk-red/gree-+
'' spk-brown/black-
right rear spk-red/yellow-+
'''''''''''''''''''' spk-brown/white-
left rear spk-blue /yellow-+
'' spk-gray/white -

antenna you done need you antenna is in your window


Jun 25, 2009 | Car Audio & Video

1 Answer

"Check SPK"


It may have been a bad solder connection on an emitter resistor, now it probably needs output transistors and a resistor or two.

Make sure it's not a speaker disconnect all speakers and power on if it still displays "check spk" it needs service. Est $100 to $140 Total

Mar 10, 2009 | RCA RT2280 System

1 Answer

No sound from speaker


Isolate the wiring, too. It's a binary problem. Should be easy. Or try running your suspected speakers on other channels to eliminate amplifier bugs.

Jan 02, 2009 | Onkyo TX-DS595 Receiver

2 Answers

Clipping amp


hi first disconnect all spks, then turn on the amp. if amp power lite stays on bright then proceed to connect one speaker or sub to the amp. if the amp lite dims during any spk connections then it may be that the spk is faulty or there is a DC voltage (dc offset) emitting thru that particular channel. also check all spk impedance before reconnecting them to the amp. cheers.

Aug 04, 2007 | Alphasonik PMA600HC Car Audio Amplifier

Not finding what you are looking for?
Packard Bell (160248-01) Computer Speakers Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Packard Bell Audio Players & Recorders Experts

David
David

Level 3 Expert

778 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

SHIVAJI YADAV
SHIVAJI YADAV

Level 2 Expert

188 Answers

Are you a Packard Bell Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...