Question about Nintendo Wii Console

1 Answer

Bowling pinbusters After loading the CD for the bowling pinbusters, I get an error stating "communications with the WII remote 1 have been interrupted" Can you tell me what I am doing wrong? TIA Larry

Posted by on

  • Michael Treiber
    Michael Treiber May 11, 2010

    is "bowling pinbusters" an individual wii game,or a nickname for bowling on wii sports?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Check your batteriyes by hitting the home button it will say all the battery power on the bottem if the batteries are low it will say that

Posted on May 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wii cursor not appearing on screen


Step 1:

First we should try to identify whether it is the sensor bar, The Wii, or the remote itself. So, let's start off by trying out the sensor bar. I would recommend you putting two (decent) sized LIT candles on both sides of the sensor, or try simply cleaning off the sensor. If the candle trick works, you have a bad sensor and need to buy a new one. If nothing changes and you're still in the same boat, then we'll try to see if it's the remote.

Step 2:

For the remote there's not too many things that can go wrong it, but we'll see if it's the remote. What you wanna do is see if the if the Wii remote has a dirty top to it (black thing on top). This will cause the IR camera to not be able to locate the sensor. If this fixes it then you'll save some money, but if it doesn't we'll try something else. Now, what we got might be a bad IR camera in which you have to buy a new controller (I suggest trying some neighbors remote or a friends to make sure this is the problem). Another thing that might be a problem is any secondary IR light source will cause interruption with the communication from the sensor to the Wii remote, but I highly doubt this is your problem.

Step 3:

Now, if all of these fail it is more than likely something with your Wii console and I would highly recommend you contact Nintendo Customer Service http://www.nintendo.com/corp/contact.jsp for they might have more knowledge than me about that. I hope that this helps you out!

Apr 05, 2013 | Nintendo Wii Video Game Consoles

2 Answers

Hi my wii wont let me down load are system update it keeps saying error and wont finish.it also keeps saying a code 32002


According to Nintendo, error 32002 means: "Lost connection during Wii system update". So, the problem probably lies either in your internet connection or in Nintendo's server. If you're using a slow internet connection such as dial-up, then the easiest solution would be to upgrade to a faster connection - most modern gaming applications require one anyways. However, if you're using a faster internet connection, try these tips:
- If you have a wireless connection, be sure that no one is using a microwave or cordless phone while you are trying to download the update, both of these devices can cause interference
- If you are on a college campus or using a shared internet connection with many people, try updating your console at an unusual time, like two or three o'clock in the morning when no one else is online
- wait a day or two and try again; Nintendo may be having server troubles
- call Nintendo's helpline at 1-800-255-3700 and tell them about your problem
Hope this helps!

May 06, 2011 | Nintendo Wii Console

1 Answer

Wii hand will not show up we tried syncing, taking out batteries, unplugging and plugging sensor bar and nothig works


Synchronizing the Wii Remote with the Wii Console Synchronizing the Wii Remote to a Wii console allows the Wii Remote to communicate with the console. The Wii Remote included with your system should already be synchronized to your console. However, all additional Wii Remotes you use with your system also need to be synced in order to function properly..
There are two different modes of synchronizing (syncing):
  • STANDARD MODE - The Standard Mode procedure is used when adding additional Wii Remotes to your system or if you want to re-synchronize your original Wii Remote. Once synchronized, the Wii Remote will stay synced to the console unless you overwrite the settings by syncing the remote to a different console. For instructions on Standard Mode syncing, please click here.

  • ONE TIME MODE - This mode allows you to temporarily use your remote on a Wii console other than your own, or to use a friend's remote on your console. It can also be used to change the order of the Wii Remotes, without the need to turn off the Wii console. One Time Mode does not delete the Standard Mode setting stored in the Wii Remote. In this mode, the Wii Remote will only communicate with the Wii console while the power is on. When the power is turned off, the Wii Remote will lose its sync with the Wii Console. For instructions on One Time Mode setup, please click here.
Note: Only a Wii Remote in Standard Mode can turn the Wii console power ON or OFF.
    Standard Mode Synchronization
    Note: Make sure you have placed batteries in the Wii Remote (how to).
  1. Press the Power button on the Wii console to turn it on.

  2. Open the SD Card Slot cover on the front of the Wii console. Remove the battery cover on the back of the Wii Remote you wish to sync up.

  3. Press and release the SYNC button just below the batteries on the Wii Remote; the Player LED will blink. Quickly press and release the SYNC button on the inside of the SD Card compartment on the console.

  4. When the Player LED blinking stops, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).
  5. wiiremotesynchstandard.gifThis procedure must be followed for each additional Wii Remote added to your system.
    Go to the Next Step (Playing Game Discs) >



    One Time Mode SynchronizationNote: This mode temporarily removes Standard Mode synchronization setup for all Wii Remotes until the power of the Wii console is turned off. When the power is turned back on again, the Standard Mode settings will return.
  1. Press the HOME Button on a Wii Remote that is synchronized with the Wii console.
  2. installation.gif
  3. Select the Wii Remote Settings option from the Home Button menu.
  4. homesmall.gif
  5. Select the Reconnect Option.
  6. wiiremotesynchotm1.gif
  7. Press the 1 and 2 Buttons at the same time on the Wii Remote that you want to synchronize with the console. If you are syncing multiple Wii Remotes, press the 1 and 2 Buttons on each Wii Remote immediately (without a significant pause) in the order you want them synced. The order in which you synchronize Wii Remotes determines the player order (1 through 4) for multiplayer games. The Player LED will blink during the syncing process. When the blinking stops, the connection is complete.
  8. wiiremotesynchotm2.gif

Jan 27, 2011 | Nintendo Wii Console

1 Answer

Its working sometime then blue light flash then turn off said Communications with the wii Balance Board have been interrupted.


It sounds like the batteries maybe low. To check this press the home button on the wii remote and you can check the status of the battery if you look at the controller list that comes up when you push the home button.

If this is fine try resyncing the balance board. To do this follow the guide here:

http://www.nintendo.com/consumer/systems/wii/en_na/setupBalanceBoard.jsp#Synch

If this doesn't work you'll need to call Nintendo so they can troubleshoot the board further.

Jan 03, 2010 | Nintendo Wii Fit - Balance Board + Game...

1 Answer

Wii, error reading Sports game


Fiend your solution direct from nintendo. Here is your solution....
http://www.nintendo.com/wiiconsole/prob676ijt65/solution

aaaabbbb19

Dec 25, 2009 | Nintendo Wii Console

3 Answers

Pressed red button for more than 10 seconds remotes not working help


hai. I am one of the user of wii....... i also got many problem like this..... i solved my problem using wii repair guide....click here to help you........

Dec 08, 2009 | Nintendo Wii Console

1 Answer

Wii not working


when putting in a cd its saying cant read disk

Dec 26, 2008 | Nintendo Wii Console

1 Answer

We are getting an error message everytime we load a disc


Hi,

Try the following options.

1:) Soft Reset:- Press the reset button on the Wii console For 2 seconds.
2:) Hard Reset. :- Unplug The Wii Console For 5-10 Minutes. As once unplugged it resets itself.
3:) use a CD/DVD Based laser head cleaning disk, to remove any dirt/dust from the laser unit.

Thankyou For Using Fixyas Free Forums.

Mike @ compurepair.

Nov 30, 2008 | Nintendo Wii Console

1 Answer

Wii bowling


This will only happen when you are a beginner.... Once you have played a few games it will go away. If you are playing as a guest the bar will always be there.

Nov 18, 2007 | Nintendo Wii Console

Not finding what you are looking for?
Nintendo Wii Console Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles Experts

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers

phil

Level 2 Expert

567 Answers

Raj Patel

Level 3 Expert

845 Answers

Are you a Nintendo Video Game Console Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...