Question about Craftsman Saws

1 Answer

My 12 inch band saw throws the lower tire when the power is switched on. The model number is 11324350.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Tires need replaced- may have a few other problems. try this
-unplug the saw spin the saw by hand, does track down the middle of both tires? also look at your guides and backup bearings.
I would take off blade-back off all guides and bearings -clean off any build up on tires- replace blade. now spin wheel ( always spin with the blade going down) if its tracking good go ahead and adjust guides and bearings to specs and try again. most likely the back up bearings are out of adjustment. they should not spin unless you are feeding material and it seems like the bottom one may be your problem.
But never the less it sounds like new tires are needed.

Posted on Oct 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I purchase a replacement tire for a Craftsman 7 1/2 inch band saw ? It is for the lower drive wheel and is app. 10 inches in diameter. It is rubber.


I love using both rubber and urethane tires. My old 14" band saw runs for 15 years with rubber tires on it; I changed it when it started cracking with urethane tires that I got from bandsawparts.com

Jun 09, 2014 | Saws

1 Answer

Black and decker 7.5 inch band saw


What is the model number?

Oct 14, 2013 | Saws

1 Answer

How to install part 41815 called tire on a model 113.243310 sears 12 inch band saw/sander


You may want to check the procedures on how to install the part on your manual? I got a link here http://www.managemylife.com/mmh/lis_pdf/OWNM/L0712215.pdf . Hope that helps . Here's a general info on installing tires .

Mar 26, 2013 | Saws

1 Answer

I have 10 inch metal band saw wheels do I buy 9 inch tires so they go on tight


I have a 10" grizzly band saw and installed 10 inch tires on it. No problem with it's tightness. Most industry standard tires today are 6, 8, 10, 12 inches...so a 10 inch tire on a 10 inch metal band saw wheel should have no problem at all. The quality of the tires should be one of your top priorities. That's why I always go for a reputable supplier. Check it out: http://bandsawparts.com.

Sep 03, 2012 | Delta BS100 Shopmaster 9 Inch Bench Top...

1 Answer

I am looking for a manual for a craftsman 12 in band saw model 113.24290.


Hello. Go to this link http://www.searspartsdirect.com

Enter the model number and you will see a menu of choices for parts and the manual for your saw. J.

May 30, 2010 | Craftsman 12 Inch Band Sawsander I2 X80...

1 Answer

I am changing the saw blade on 12 inch Craftsman bandsaw


Go to: Searspartsdirect.com and enter the complete model number minus the decimal point. This will bring you a series of parts drawings and possibly an owner's manual. Generally, adjustment is provided for the upper wheel only--use hand power to check the tracking performance. Good luck!

Jan 12, 2010 | Saws

1 Answer

I have a 12 inch Sears/Craftsman band saw. I got


that is where I would look first, you would need your model number and go to Searspartsdirect.com and type in your model number to find and order the replacement rubber tires and that should take care of your problem

Dec 16, 2009 | Craftsman Saws

Not finding what you are looking for?
Saws Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Saws Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Craftsman Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...