Question about Poulan Pro Chain Saw 46cc 20"

1 Answer

Gap between magnato - Poulan Pro Chain Saw 46cc 20"

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 183 Answers

Use a clean and dry business card to set the gap from magneto to flywheel. It is almost the perfect (.006") gap setting.
Good luck!

Posted on Aug 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

NEED SPARK PLUG GAP FOR 9BSXS 190-1VH


The gap is .040 and is pretty much a standard gap.

May 17, 2017 | Cars & Trucks

1 Answer

Gape setting for points on massey fergson 135 gas motor ?


need spark plug gap and point gap for MF 135

I found this link about the points gap and plug gap.
"My I&T manual says .021 point gap and .025 plug gap."
There's a lot more information on the MF 135 on the web. Just do a search ' MF 135"; "massey ferguson 135 perkins gas engine point gap"

Jun 14, 2014 | Computers & Internet

1 Answer

Ngk spark plug gap for 2005 hummer h2


check Gap: .040

Bosch Spark Plug: Part Number: 18594-05120685

PLATINUM -- Original Equipment is Iridium. Gap is Preset

OE Fine Wire Platinum -- Do Not Gap, Gap is Preset

OE Fine Wire Iridium -- Do Not Gap, Gap is Preset

Sep 22, 2013 | Spark Plugs BR4HS Plug 10/BX #3322

1 Answer

PLUG GAP FOR 1996 OLDS


Mr Bobby I manage to find in my books few things about your model on spark plugs. I hope will help you. Depends the make you have the Gap: 1. Autolite Ap606 Platinum Gap 0.60, 2. AC DELCO Professional Platinum Gap 0.60, 3. NGK G-Power Platinum TR55-1GP Gap 0.60, 4. CHAMPION RS12 PLP6 Gap 0.60, 5. CHAMPION COPPER PLUS RS13LYC5 Gap 0.60, 6. Platinum Alloy Gap 1,1mm if your engine size is 3.1,also for 3.1 3ngine DENSO TT PLATINUM Gap 0.04 inch. select and carry on .

Aug 21, 2012 | 1996 Oldsmobile Cutlass Ciera

2 Answers

Need to know the gap for 1995 chev.tahoe spark plug


I prefer bosch plugs :

2000 Chevrolet Tahoe 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2000 Chevrolet Tahoe 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2001 Chevrolet Tahoe 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2001 Chevrolet Tahoe 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2002 Chevrolet Tahoe 5.3L 323CID V8 FLEX FI Z - GAP=0.040"; Original equipment is iridium. 2002 Chevrolet Tahoe 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2002 Chevrolet Tahoe 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2003 Chevrolet Tahoe 5.3L 323CID V8 FLEX FI Z - GAP=0.040"; Original equipment is iridium. 2003 Chevrolet Tahoe 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2003 Chevrolet Tahoe 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2004 Chevrolet Tahoe 5.3L 323CID V8 FLEX FI Z - GAP=0.040"; Original equipment is iridium. 2004 Chevrolet Tahoe 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2004 Chevrolet Tahoe 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe LS 5.3L 323CID V8 FLEX FI Z - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe LS 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe LS 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe LT 5.3L 323CID V8 FLEX FI Z - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe LT 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe Z71 5.3L 323CID V8 FLEX FI Z - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe Z71 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe 5.3L 5328CC 325CID V8 FLEX FI Z L59 - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe 5.3L 325CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe LS 5.3L 5328CC 325CID V8 FLEX FI Z L59 - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe LS 5.3L 325CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe LS 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe LT 5.3L 5328CC 325CID V8 FLEX FI Z L59 - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe LT 5.3L 325CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe Z71 5.3L 5328CC 325CID V8 FLEX FI Z L59 - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe Z71 5.3L 325CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2007 Chevrolet Tahoe LS 4.8L 294CID V8 GAS FI C - GAP=0.040"; Original equipment is iridium. 2007 Chevrolet Tahoe LS 5.3L 5328CC 325CID V8 GAS FI J LY5 - GAP=0.040"; Original equipment is iridium. 2007 Chevrolet Tahoe LT 5.3L 5328CC 325CID V8 GAS FI J LY5 - GAP=0.040"; Original equipment is iridium. 2007 Chevrolet Tahoe LTZ 5.3L 5328CC 325CID V8 GAS FI J LY5 - GAP=0.040"; Original equipment is iridium

Feb 19, 2011 | Chevrolet Tahoe Cars & Trucks

1 Answer

Need do know the spark plugs gap


If you're replacing the spark plugs in your car engine, you'll need to set the gap before reseating the spark plug. The gap is the distance electricity arcs between the ground electrode and center electrode. The gap must be set correctly to ensure maximum performance. Here's how to set the gap of a spark plug.

  1. Remove the spark plug wires. Use a socket wrench to remove the spark plugs from their chambers.
  2. Clean the spark plug if you are not replacing it with a new one. Remove all dirt and debris from the spark plug.
  3. Check the owner's manual for your car (or any appliance with spark plugs) to find out the recommended gap setting.
  4. Use a gap tool to check the gap of the spark plug. Slip the tool between the ground electrode and center electrode. The gap tool should fit snugly at the recommended gap width indicated on the tool.
  5. Push the tool between the electrodes a few times to ensure proper gap. If the gap is too wide, push the ground electrode firmly against a flat surface to narrow the gap and then check again with the gap tool.
  6. Repeat Step 5 as necessary until you reach the correct gap. Reseat the spark plug and reattach the spark plug wires
Good Luck

Dec 10, 2010 | 1997 Pontiac Grand Am

1 Answer

Plug gaps


Manufacturer Spark Plug Gap A spark plug part number might fit hundreds of engines and although the factory will typically set a gap to a pre-selected setting this gap may not be optimum for your particular engine and may not take into account modifications that you may have made to the engine. Spark Plug Gap – Bigger is Better The larger the spark kernel that is generated by a spark jumping the electrode gap, the more likely and complete the fuel burn will be, and the smoother the engine will run. That is, the larger the spark gap that’s exposed to the air/fuel mixture, the easier it is to initiate combustion. This translates directly into improved throttle response. So, the larger the plug gap you can run (without misfires) the better. Unfortunately, the greater the plug gap, the higher the voltage requirement to jump the gap. The difficulty lies in that, any added gap creates more strain on the other ignition parts. Coils, for example, may not have enough stored energy to cross the gap, creating a misfire. Old plug wire insulation can break down at the higher voltages required to fire a larger gap. The stock Ducati coils are good enough to fire a 0.044-inch plug gap. Any gap larger than this will likely result in more misfires (there’s always a few) and subsequent power loss. The correct new plug gap is specified at about 0.024-inch (0.6mm). But, remember, as a plug wears, the gap opens up further. If you use conventional sparkplugs, start with the recommended gap and try opening the gap up in 0.002-inch increments. You should note a progressively smoother throttle response if not more power. When the bike begins to lose power, go back 0.001 - 0.002 inch and this will be your optimum gap. I don't know offhand what the DCPR8E plug comes pre-gapped at but as a good rule-of-thumb, if you go more than 0.008 inch over the out-of-the-box gap you won’t maintain parallel surfaces between ground and the center electrodes. So if you reach that point, change to a plug that starts at a larger gap. The NGK dash 9 series starts at a 0.9mm (0.035-inch) gap, and is used for that reason. If you run iridium or platinum electrode plugs, start with the 0.035-inch gap that they are shipped with. Don't run them at smaller gaps or you'll loose throttle response. If you have a older bike, you may arc over the plug wires before you can reach the optimum plug gap. If the spark plug wires have inadequate insulation, the wire cannot maintain a high enough voltage across the insulation and will arc to ground before firing the plug gap. The factory spark plug leads are stranded wire covered with an EPDM jacket and although the wire itself will last a long time, the jacket will start to break down after a couple of years which is why most good aftermarket wire is insulated with silicone rubber. If this is the case, replace the stock spark plug wires with a set of Magnecor or similar quality wires. This will allow running a larger plug gap without a concern for insulating the higher voltage needed to jump the gap. Ducati 916 Magnecor #2549 wires, for example, run $67. Ignition Amplifiers Running a larger gap is the main benefit of installing an ignition amplifier, such as the one sold by Evoluzione for Ducati's. The Evoluzione ignition amplifier increases the primary voltage to the stock Ducati coil from the existing battery voltage to either 16 volt or 18 volt (user selectable). A higher primary voltage means you get a higher secondary voltage applied to the wires and plugs. The higher the secondary voltage - the larger gap it will jump across. Evoluzione recommends that for best throttle response, you run a 0.060 inch plug gap. One reservation that I have about ignition amplifiers as a group is that they could possibly cause overheating and eventual failure of the stock coils or wires. This reliability consideration has to be balanced against improved performance. An independent test by Road Racing World magazine on a GSXR 1000 saw only about a 0.2 HP improvement, but throttle response is the major benefit.,,,

Nov 10, 2008 | 2000 Ducati MH900e

1 Answer

Plug gaps


Manufacturer Spark Plug Gap A spark plug part number might fit hundreds of engines and although the factory will typically set a gap to a pre-selected setting this gap may not be optimum for your particular engine and may not take into account modifications that you may have made to the engine. Spark Plug Gap – Bigger is Better The larger the spark kernel that is generated by a spark jumping the electrode gap, the more likely and complete the fuel burn will be, and the smoother the engine will run. That is, the larger the spark gap that’s exposed to the air/fuel mixture, the easier it is to initiate combustion. This translates directly into improved throttle response. So, the larger the plug gap you can run (without misfires) the better. Unfortunately, the greater the plug gap, the higher the voltage requirement to jump the gap. The difficulty lies in that, any added gap creates more strain on the other ignition parts. Coils, for example, may not have enough stored energy to cross the gap, creating a misfire. Old plug wire insulation can break down at the higher voltages required to fire a larger gap. The stock Ducati coils are good enough to fire a 0.044-inch plug gap. Any gap larger than this will likely result in more misfires (there’s always a few) and subsequent power loss. The correct new plug gap is specified at about 0.024-inch (0.6mm). But, remember, as a plug wears, the gap opens up further. If you use conventional sparkplugs, start with the recommended gap and try opening the gap up in 0.002-inch increments. You should note a progressively smoother throttle response if not more power. When the bike begins to lose power, go back 0.001 - 0.002 inch and this will be your optimum gap. I don't know offhand what the DCPR8E plug comes pre-gapped at but as a good rule-of-thumb, if you go more than 0.008 inch over the out-of-the-box gap you won’t maintain parallel surfaces between ground and the center electrodes. So if you reach that point, change to a plug that starts at a larger gap. The NGK dash 9 series starts at a 0.9mm (0.035-inch) gap, and is used for that reason. If you run iridium or platinum electrode plugs, start with the 0.035-inch gap that they are shipped with. Don't run them at smaller gaps or you'll loose throttle response. If you have a older bike, you may arc over the plug wires before you can reach the optimum plug gap. If the spark plug wires have inadequate insulation, the wire cannot maintain a high enough voltage across the insulation and will arc to ground before firing the plug gap. The factory spark plug leads are stranded wire covered with an EPDM jacket and although the wire itself will last a long time, the jacket will start to break down after a couple of years which is why most good aftermarket wire is insulated with silicone rubber. If this is the case, replace the stock spark plug wires with a set of Magnecor or similar quality wires. This will allow running a larger plug gap without a concern for insulating the higher voltage needed to jump the gap. Ducati 916 Magnecor #2549 wires, for example, run $67. Ignition Amplifiers Running a larger gap is the main benefit of installing an ignition amplifier, such as the one sold by Evoluzione for Ducati's. The Evoluzione ignition amplifier increases the primary voltage to the stock Ducati coil from the existing battery voltage to either 16 volt or 18 volt (user selectable). A higher primary voltage means you get a higher secondary voltage applied to the wires and plugs. The higher the secondary voltage - the larger gap it will jump across. Evoluzione recommends that for best throttle response, you run a 0.060 inch plug gap. One reservation that I have about ignition amplifiers as a group is that they could possibly cause overheating and eventual failure of the stock coils or wires. This reliability consideration has to be balanced against improved performance. An independent test by Road Racing World magazine on a GSXR 1000 saw only about a 0.2 HP improvement, but throttle response is the major benefit.,,,

Nov 10, 2008 | 2008 Buell XB12XT

1 Answer

Plug gaps


Manufacturer Spark Plug Gap A spark plug part number might fit hundreds of engines and although the factory will typically set a gap to a pre-selected setting this gap may not be optimum for your particular engine and may not take into account modifications that you may have made to the engine. Spark Plug Gap – Bigger is Better The larger the spark kernel that is generated by a spark jumping the electrode gap, the more likely and complete the fuel burn will be, and the smoother the engine will run. That is, the larger the spark gap that’s exposed to the air/fuel mixture, the easier it is to initiate combustion. This translates directly into improved throttle response. So, the larger the plug gap you can run (without misfires) the better. Unfortunately, the greater the plug gap, the higher the voltage requirement to jump the gap. The difficulty lies in that, any added gap creates more strain on the other ignition parts. Coils, for example, may not have enough stored energy to cross the gap, creating a misfire. Old plug wire insulation can break down at the higher voltages required to fire a larger gap. The stock Ducati coils are good enough to fire a 0.044-inch plug gap. Any gap larger than this will likely result in more misfires (there’s always a few) and subsequent power loss. The correct new plug gap is specified at about 0.024-inch (0.6mm). But, remember, as a plug wears, the gap opens up further. If you use conventional sparkplugs, start with the recommended gap and try opening the gap up in 0.002-inch increments. You should note a progressively smoother throttle response if not more power. When the bike begins to lose power, go back 0.001 - 0.002 inch and this will be your optimum gap. I don't know offhand what the DCPR8E plug comes pre-gapped at but as a good rule-of-thumb, if you go more than 0.008 inch over the out-of-the-box gap you won’t maintain parallel surfaces between ground and the center electrodes. So if you reach that point, change to a plug that starts at a larger gap. The NGK dash 9 series starts at a 0.9mm (0.035-inch) gap, and is used for that reason. If you run iridium or platinum electrode plugs, start with the 0.035-inch gap that they are shipped with. Don't run them at smaller gaps or you'll loose throttle response. If you have a older bike, you may arc over the plug wires before you can reach the optimum plug gap. If the spark plug wires have inadequate insulation, the wire cannot maintain a high enough voltage across the insulation and will arc to ground before firing the plug gap. The factory spark plug leads are stranded wire covered with an EPDM jacket and although the wire itself will last a long time, the jacket will start to break down after a couple of years which is why most good aftermarket wire is insulated with silicone rubber. If this is the case, replace the stock spark plug wires with a set of Magnecor or similar quality wires. This will allow running a larger plug gap without a concern for insulating the higher voltage needed to jump the gap. Ducati 916 Magnecor #2549 wires, for example, run $67. Ignition Amplifiers Running a larger gap is the main benefit of installing an ignition amplifier, such as the one sold by Evoluzione for Ducati's. The Evoluzione ignition amplifier increases the primary voltage to the stock Ducati coil from the existing battery voltage to either 16 volt or 18 volt (user selectable). A higher primary voltage means you get a higher secondary voltage applied to the wires and plugs. The higher the secondary voltage - the larger gap it will jump across. Evoluzione recommends that for best throttle response, you run a 0.060 inch plug gap. One reservation that I have about ignition amplifiers as a group is that they could possibly cause overheating and eventual failure of the stock coils or wires. This reliability consideration has to be balanced against improved performance. An independent test by Road Racing World magazine on a GSXR 1000 saw only about a 0.2 HP improvement, but throttle response is the major benefit.,,,

Nov 10, 2008 | 1999 Bimota SB8R

Not finding what you are looking for?
Poulan Pro Chain Saw 46cc 20" Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...