Question about PC Chips M963GV (V3.3A) Motherboard

Open Question

This unit has a 3.0GHz CPU that only runs at 2GHz. I checked PcChips site for CPU's that run on this board and bought a 3.06 P4. The system will not boot and the bios on the website shows the wrong date. Mine is (9-28-2006 so i flashed it to the one on the download page. I was hoping this would make the 3.0 run at 3GHz but no help there. Installing the 3.06 gives me a blank nothing so I need help. THe PDF manual on the download page for the M963GV ver5 (this is the one I have) shows the M963GV v3.3 manual which is different. I just need to know what to do to get either the 3.0 to run at full speed or to get the 3.06 to run at all and yeah at full speed. Please help

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: pcchips M810dlu v7.5c and amd duron pro2000

hi bajazzo1954,
the cpu would be fast on amd duron pro 2000
it would be better for ur pc

regards
shailesh

Posted on Mar 11, 2008

Ad
map9966
  • 2351 Answers

SOURCE: drivers for pcchips m963gv

Hi kenny,

Just click on this link. All the drivers for you're motheboard are listed here. PC Chips M963GV (V3.3A).

http://www.pcchips.com.tw/PCCWeb/Products/ProductsDetail.aspx?MenuID=22&LanID=0&DetailID=354&DetailName=Driver

Good Luck!
Have more questions, feel free to ask.

Mike

Posted on May 04, 2008

  • 1011 Answers

SOURCE: I need the drivers for M963GV motherboars

dear,

this link will provide u the drviers as required by u.

dont forget to rate as it fix your problem

regards,

Posted on Oct 25, 2008

  • 1 Answer

SOURCE: USES only 2ghz instead of 3

Have you just installed this processor as an upgrade?? Check the jumper settings on the motherboard and the multiplyer in the bios.You need 133Mhz clock speed. With the multiplier of 23 which is set in the bios automatically by the CPU id 23x133 = 3.06Ghz. I suspect that the jumper settings are for 100Mhz so 100x23 = 2.3Ghz. Let me know how you get on or if you have any more questions as i have the same motherboard and im gonna buy one of these processors @ Lecousi@yahoo.co.uk

Regards
Lecousi

Posted on Mar 16, 2009

  • 334 Answers

SOURCE: pcchips a13g drivers

hry there, you can find it at the following link

http://www.pcchips.com.tw/PCCWebSite/Downloads/Category_Download.aspx?MenuID=6&LanID=2

Posted on Jun 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My pc restarts when i invoke any programe internet explore or windows explorer.the system is windows xp sp2 with folling configuration pi845gv asrok motherboard,p4 2ghz


If the software appears to be hanging and then rebooting you most likely have bad capacitors on the motherboard. This is a pretty old board and the caps tend to dry out and this is a typical behavior. If there is a brief blue screen before it reboots I'd say just re-install windows. Also be sure to get SP3 and all the security updates. Your leaving yourself open for attack.

Nov 29, 2012 | ASUS P4i45gv Asrock P4 Motherboard 845gv...

2 Answers

Upgrade PCChips M925


According to PCChips, the maximum CPU & memory supported for all three is the Intel P4 Northwood (HT) 3.06 GHz 512K,533FSB,Socket 478 and 2GB (2 x 1GB) DDR 266.

Be sure you have the latest BIOS version for your motherbaord.

M925ALU (V7.3) must have BIOS : 030703s
M925G (V8.0) and M925G (V9.1b) must have BIOS : 050510s

Hope this helps you out.

Jan 09, 2010 | PC Chips (M925G) Motherboard

3 Answers

I don't know what version is my MS-6547. I want to upgrade the CPU (currently running P4 2Ghz) I know there's a description of each version somewhere here, but this one doesn't sem to adjust to any, First,...


Roberto,
Well I can say its a socket 478 P4 and you can probably only upgrade to about a 2.4Ghz P4 , probably not much of an upgrade, better to build or buy a new PC for around $500-$600
Eric

Jul 31, 2009 | MSI MS-6547 Motherboard

1 Answer

Not enough power on cpu


sir,
You can contact this number for *********** board problem.
800-404-2284 / 916-377-7000

Jul 03, 2009 | Computers & Internet

2 Answers

Intel P4 2.66GHz/512/533 is not working on MS9337C+.


#1. Does the CPU fan run if not then you may have a conductivity problem between fan and CPu. Did you use thermal paste or grease?

If fan is running follow directions below from my manual for MS9377C+ mainboard.

Go into the BIOS setup ,go to CPU setup, select proper voltage for you CPU. On Advanced setup page see if the hyperthreading function is revaeled. If so your CPU has this function. Set "Enabled " to test HT CPU function. If this doesn't work try "Disabling" the function. Good luck. I am about to attempt tp upgrade to a Prescott 3.0E which the box says this board supports. Sure hope so . Am running a 1.7 now.
umcds@sssnet.com

Apr 16, 2009 | Matsonic MS9337c Motherboard

1 Answer

Pc Chips P23G wont reconize my new p4 core 2 duo


The PC Chips P23G versions 1.0A & 3.0 will not support any current generation Core2Duo, Core2Quad or Pentium Dual-Core processors. Only some of the first generation (Conroe Core) Core2Duo processors which run @ 1066mhz bus and some Pentium D (presler core) processors which run @ 800mhz bus.are supported. Not even most current BIOS will add support for any current processors. Check the pcchips website for CPU compatibility for the P23G..

Mar 22, 2009 | PC Chips P23G Motherboard

2 Answers

I don't have mother board cd


Hi, I am confused regarding the model of the Mother board
you have:

The P5S800-VM is an LGA775 socket mother-board for a
Pentium 4 CPU.

P4-515, on the other hand, does not return any hits on the
Asus web-site search.

===

I think your best solution is to contact ASUS /USA:

1-888-678-3688

and talk to customer support.

They will guide you in identifying the exact motherboard you
have, so you can download the driver set from their
support site.

BTW.

I think you computer performance is very unbalanced at 256 MB.
This is not nearly enough memory to run with such a fast CPU,
(2.93 Gigs), and your machine must be terribly disk bound:

1) When your operating system runs out of semiconductor
memory, it begins to thrash to disk, which is 10 million times
slower then RAM, making the fast CPU a total waste of
money.

2) For a normal machine running Windows and a 3Gig CPU
you should have at least 1 GB of RAM, preferably 2GB
(RAM is cheap these days)

But before I put my foot too deep into my mouth, I notice that
you are running FREEDOS, does that mean you are running
DOS only (No Windows ?) for some specialized application ?

Martin



Jul 20, 2008 | ASUS P5S800-VM Motherboard

1 Answer

Motherboard and CPU


Well anything along the 2ghz line in cpu will do and as long as you get a compitibale motherboard that will be fine. If you want a specific combination the intel BX80557E2220 processor (Core 2 Duo) ans the MSI P31 Neo-F LGA775 Intel P31 1333 FSB DDR2 ATX i personally think is great. Please bear in mind you may also need new RAM for this combi.

Jun 21, 2008 | Pioneer ECS P4VMM2 V3.2A P4(478)/FSB...

1 Answer

Changing the vid


Dells 5150's are a problem and If they installed a 2.4 on this model theres a warpage issue usually.. (Dont ask).. Its complicated to say the least... Run on the 2.4 and reinstall the video driver for the actual unit.. (Did you ever see a "This unit does not support this CPU and may run" Blah, blah, blah. error on Boot ?? Thats why.. Good luck!
Ken

Nov 10, 2007 | Computers & Internet

1 Answer

MSI MS-6534


see this official cpu support for your board, you can go upto a 2.8ghz northwood P4 cpu http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=299&maincat_no=1#menu

May 15, 2007 | MSI MS-6534 (6534-010) Motherboard

Not finding what you are looking for?
PC Chips M963GV (V3.3A) Motherboard Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Chips Computers & Internet Experts

David
David

Level 3 Expert

781 Answers

Alun Cox

Level 3 Expert

2678 Answers

Jerry Umali

Level 3 Expert

979 Answers

Are you a PC Chips Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...