Question about Office Equipment & Supplies

Open Question

Gestetner 6002 - Error Code SC542 - trying to bypass the error code to get into "system settings". Can you help me bypass the code to enter system settings?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Ricoh 1515 MF shows error code sc542

Um.. I don't see an "online" or "escape" button anywhere on the printer...

Posted on Jun 23, 2008

  • 37 Answers

SOURCE: Gestetner 6002?

you can down load a user manual for the machine at www.gestetner.co.za

Posted on Aug 14, 2008

M2Tech1
  • 313 Answers

SOURCE: error code SC542, unable to clear message from

this is an error for the fuser heat up..the temp is not being maintained or fluctuations. try this press the yellow clear button at top of number pad then enter 107 and hold down the red cancel button..the screen will change enter the copier sp and select 5.mode arrow down to 5-810 sc reset and execute.turn machine off.. if the code disappears it could have been just a glitch if not check the fuser to see if there is heat coming from it the lamps will come on at te start up. you can check this by putting a screw driver in the actuator slot to cheat the door switch if you see the lamp come on then you may just have to clean off the thermistors .. open the fuser up with the top screws and check that there isnt any build up of toner on thermistors..hope this helps good luck A

Posted on Jun 12, 2009

santosj27
  • 263 Answers

SOURCE: Gestetner 2212 copier Service Code SC542 I"ve

In your machine (model) you have to enter in SP mode to reset your error code.
Try this:
Yellow key.
1-0-7 on the key pad
Red key at least 3 sec.
Press "copy sp"
On the key pad press 5 810 and #.
Press execute
Exit all the way out.
Turn the machine off and on.

Posted on Mar 01, 2011

bosegautam11
  • 1 Answer

SOURCE: Ricoh Aficio SP C411dn error SC542

Ricoh Aficio error SC542

Posted on Sep 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What is error code SC542 for ricoh aficio 9005?


Ricoh Aficio MP2510, 3010 Error code sc542 on Lanier ...

? 6:08
https://www.youtube.com/watch?v=58MQVyjfDyg
Sep 3, 2013 - Uploaded by Used .Copier
Are you getting Error Code sc542 on your Ricoh, Lanier,Savin or Gestetner copiers? ... Ricoh Aficio 1022 ...

How to reset Ricoh Error Code sc542 sc546 sc548 problem ...

? 2:41
https://www.youtube.com/watch?v=3CnGl1Ytp34
Sep 21, 2015 - Uploaded by Copier Liquidation Center
How to reset Ricoh Error Code sc542 sc546 sc548 problem ...Ricoh Aficio copiers : AFICIO 1013 F

Dec 02, 2015 | Ricoh Aficio Office Equipment & Supplies

1 Answer

Gestetner DSM730


thermostatic from the fuse unit

Jun 20, 2014 | Gestetner 2212 Digital Imaging System...

1 Answer

CODE SC542


press clear mode key follow by 107 and hold the stop/clear key to enter sp mode power the copier off and on if the problem reoccur replace fuser unit and enter mode and off and on the copier

May 11, 2013 | Gestetner 3255 3265 3270 3355 3370 5502...

1 Answer

Gestetner Dsc445 service code error


have you checked/replaced the thermostats?
this may also be a problem with your hvt board or power supply.

Feb 26, 2013 | Gestetner Office Equipment & Supplies

1 Answer

Gestetner 2212 copier Service Code SC542 I"ve


In your machine (model) you have to enter in SP mode to reset your error code.
Try this:
Yellow key.
1-0-7 on the key pad
Red key at least 3 sec.
Press "copy sp"
On the key pad press 5 810 and #.
Press execute
Exit all the way out.
Turn the machine off and on.

Feb 28, 2011 | Gestetner 2212 Digital Imaging System...

1 Answer

SC542 error code


Without a model, I can't give you a lot of information, but I am assuming it is a Ricoh machine (Possibly Lanier/Gestetner, same difference), as that's the format of their error codes. An SC542 error code is a Fuser Temperature Error, meaning that the fuser didn't warm up fast enough. It is extremely likely that you will have to replace the fuser unit before the error code will go away. Please give me a model number if you need more information and I will try to be a bit more precise with the information. Thanks.

Feb 28, 2011 | Office Equipment & Supplies

1 Answer

Transformer blew at our office yesterday, now calling for a service call, error code SC542???


sc542 is a fuser temperature error code, which could either be something simple (a bad sensor reading) or something serious (a blown thermostat). Either way you'll need to have your service technician come take a look at it and reset the code. (Unfortunately, turning the printer off and back on won't help.)

Sep 14, 2010 | Gestetner C7526dn Laser Printer

2 Answers

Error code sc542 any ideas how to fix


Hi


Thanks for using FixYa. This error mostly occurs due to power outage. This error means that the fuser temperature and hot roller temperatures have warm up. After occurring of this error the printer will not work until your clear this error code.

To clear this error code follows this step by step procedure---

  • To Enter in Service Mode hold down the Online + Escape keys simultaneously and then turn on the printer.
  • Use up and down arrow keys to select SP2
  • Press Enter
  • Use up and down arrow to locate SP5
  • Press Enter
  • Use up and down arrow keys to select 810
  • Press Enter
  • Confirm the selection
  • Power off and on.

This will resolve the issue by clearing the error code.


Please do rate the solution and revert for further assistance.


Thanks

Rylee

Nov 16, 2009 | Gestetner DSM 651 Copier

2 Answers

Error code SC 542 on my Gestetner Dsm622sp


Fusing unit problem.Verify the heater lamps,thermistor and thermofuse continuity.Enter in the SP mode turn OFF the main switch,unplugged the machine wait 10 sec.,plugged and turn ON the copier.

Sep 24, 2009 | Gestetner Office Equipment & Supplies

1 Answer

Functional problem code SC542-00


Enter SP mode > Clear (yellow) button > 1 0 7 > and press and hold the Stop (red) button for 3 seconds.
Then switch off and on the machine.
If error still there, probably you have a problem in the fusing unit.
Possible causes are:
Thermistor defective;
One of the fusing lamp is open circuit;
Thermofuse open;
Fusing unit connector defective; and
Power supply board.
Good luck and please rate me, thanks.

Jan 21, 2009 | Gestetner Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...