Question about Craftsman Saws

1 Answer

I have a sears reciprocating saw with a broken blade.I can't remove the busted blade.Is there any way of removing it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 43,501 Answers

Hi,
Getting a broken blade our of the sawzall chuck can be difficult and require some ingenuity and patience...
Sometimes there be enough blade left so that you can grab it with a needle nose pliers... othertimes it is flush and that makes it more difficult... holding the chuck in the release position and rapping the saw against a table or with a hammer can jiggle the piece out....of course you have the chuck pointed down while you do that...
Also moving the piece around a bit with a stiff wire and also soaking the chuck and blade with WD-40 helps also....
Usually it will take a combination of these things and some persistance to get the job done...

heatman101

Posted on Aug 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the blade clamp to remove broken blade?


Some reciprocating saws have a spring-loaded chuck you twist to release the blade.

Jul 26, 2015 | Saws

1 Answer

How do I remove blade that's broken off in a Skil 9216 reciprocating saw?


Turn the release as far as it will go, then tap on something blade down till it emerges.

Aug 03, 2014 | Skil 9216-01 9.0 Amp Variable Speed...

1 Answer

How do i remove a broken blade in the bosch rs 325


Open the chuck and try gripping the bit of broken blade with some tweezers or flick it out with a small screwdriver.

Nov 30, 2012 | Bosch RS325 Compact Demolition...

1 Answer

I have a dewalt model dw008 reciprocating saw.while removing a broken blade a small steel ball fell out. #52 in their parts manual.where does it go?


Here is a parts diagram. Item 52 is the ball. It fits behind item 49. Item 49 has a groove machined into it so that when it is moved it allows the ball to move away from the blade far enough to insert the blade. Once the lever is released the ball moves back and locks the blade into place.

DeWalt parts diagram

Jul 20, 2012 | Dewalt DW008 24V XTR Reciprocating Saw...

1 Answer

How to remove broken blade stub from cordless ryobi reciprocating saw


Try spraying the clamp assy with WD40 and then gently bang the front down against the work surface whilst holding open the clamp lever.

May 16, 2012 | Ryobi 18 V Cordless Reciprocating Saw

1 Answer

Broken blade in dewalt sawzall


Remove broken blade, install new one. These blades don't change themselves, unfortunately.

May 06, 2012 | Dewalt Dw938 18v Reciprocating Saw Sawzall...

1 Answer

Trying to find a tool to remove screws from my Navigator saw to replace the blade assembly. Also where can I purchase the blade assembly and the tool to remove the casing .


If you live by any wal mart or hardware stores they should carry the components you are looking for. like sears they will have what you are looking for.

Apr 05, 2011 | Black & Decker Saws

1 Answer

How do I remove a broken blade from a dw304 saw??


Unloosen the blade and You could try holding a strong magnet against a screwdriver and touch the blade of the screwdriver to the broken blade and pull it out.

Mar 16, 2011 | Heavy Duty DeWALT DW304PK DW304P HeavyDuty...

1 Answer

How do you install the blade in the craftsman recipricating saw model 320


You need a allen wrench to remove the blade and to reinsall it look at the base of the blade and you will see an allen wrench. If there is no allen wrench then you must pull down on the clap assembly to release the blade. If you still can't figure it out here is sears web site where you can get help for it if you need a picuter.
http://www.searspartsdirect.com/partsdirect/index.action?psid=26128394&sid=PSx20071217x00001a

Sep 17, 2009 | Craftsman 8.0 amp Reciprocating Saw

1 Answer

How does one remove a broken blade from a Bosch rs20 blade holder


twist the collar around where the blade fits in the saw. It will lock in the open position. When you insert the new blade, do so firmly until the collar releases locking the new blade in place. Give a tug at the blade to make sure it is locked in.

Nov 27, 2008 | Bosch RS20 13 Amp Reciprocating Saw

Not finding what you are looking for?
Saws Logo

Related Topics:

523 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Saws Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Craftsman Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...