Question about Standard (CRT) Televisions

1 Answer

Flyback transformer. I am trying to locate a Sanyo flyback transformer; part numbner: FD134.  Any help you can give me in locating this would be greatly appreciated.  Thank you.

Posted by on

  • 1 more comment 
  • rondrs2000 May 03, 2008

    Actually that flyback transformer came out of a 1987 Sears LXI color TV; model number: 564-42953750.

    It may not be a Sanyo model, but I found another transformer on the web; P/N: FD154; so I assumed it was built by Sanyo.

    Thank you, bobbyj, for answering my post.  Please let me know if you do come up with something.

    Thanks again and take care.

    rondrs2000


  • rondrs2000 May 03, 2008

    I apologize; there are a few more digits on the flyback which I omitted previously:

    FD134WGHf

    Also, on the main board there are three other numbers stenciled in the location where the flyback came out of:

    AR3RCS
    87NZ
    EB2146

    Thanks again for all your help.

  • Robert Johnson May 11, 2010

    that doesn,t cross to anything what is the model of the set?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 395 Answers

I can not seem to cross those numbers to any source I have. there is a good possiblity that the part is no longer available. after all the set is 20+ years old and manufacturers do not keep making parts for them forever. sears had other companies make their tvs early sets were made by zenith then they were RCA.

Posted on May 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the flyback transformer number of sanyo tv ST-21SE1


If you wish to get some details; visit the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Flyback transformer data is given. Search the site with the keyword "Flyback Transformer". Type in these words in the search box located at the top right of the display window.

Jun 20, 2015 | Sanyo Standard (CRT) Televisions

1 Answer

We replaced the transformer for our RCA F27650. It was sparking and now it is not, but now the screen won't turn on. It is just black. We hookd all the wires up like they were. we can hear sound, but...


Hello
Along with the flyback transofrmer, its horizontal output transistor also must be replaced. I don't know whether you have replaced it or not. If not, replace it too. It can be located very near to the flyback transformer, a three terminal component, black in colour, usually screwed to a metal heatsink. Then switch on the TV and measure the video output voltage at the video output card pluged directly to the picture tube neck. The collector of the video aoutput transistors must come around 145VDC. If it also is there, advance the screen control on the flyback transformer to get a raster. If that voltage is not there, it means that the flyback transformer is not working, and horizontal oscillator stage should be checked for oscillation, check the lined drive transformer for its primary winding open, Check the entire horizontal oscillator section. The collector point of the line drive transistor, the transistor that drives the line drive transformer, a small transformer soldered diretly to the printed circuit board; should be checked with frequency meter. The frequency at that point should come around 15525HZ approx: OK.

Mar 19, 2011 | RCA F27650 27" TV

1 Answer

Why does it power off on it's own? I've checked to make sure all the timers are off.


loose connection on power supply , u would have to open tv and do solder connection on the flyback transformer , this transformer is easy to located because that part is big and black and u would see one cable goes to the picture tube that flyback has loose connection need to bo solder

Dec 07, 2010 | RCA TruFlat 27F520T 27" TV

1 Answer

Locate flyback transformer t 402 sears lxi 56448060550 sanyo product?


Hello

What do you want to know exactly. It is not clear to understand from your post. Specify it clearly please. Ok.

Nov 30, 2010 | Sanyo Standard (CRT) Televisions

1 Answer

Need to replace the flyback (transformer) is it


good morning friend. it is not very complicated to fix, but it is far more better to allow someone with experience to solve this problem. there will be excess solder on the bottom of the circuit board the connects the flyback. you must desolder this in order to remove it. you need to have a mesh desolder wick in order to completely remove the solder. go over each eyelet( pins from flyback) as many times it take to completely clean it. follow the cords to their different destination and unplug them. write down each location and what you did and go into the reverse order. thank you and pleasew rate my solution.

Nov 19, 2009 | Sony KP-53HS10 TV

1 Answer

I need to find a service manual for an RCA F32650 so I can replace a blown flyback transformer, preferabley free if possible


I have repaired many of these; if a high pitched buzz when you plug the set in---flyback and horz. output transistor are bad--transistor has a generic number on it--Flyback is location number LL05, part number should be 257805---you will find RCA no longer has this part--most now are replaced with an asti #2078----CHECK the RCA number on Ebay---company I get them from is Suburban Electronics---Flyback and transistor are less then 30 dollars for both.

Aug 06, 2009 | Standard (CRT) Televisions

2 Answers

It won't turn on


The smell of something burning is not a good sign. The clicking sound you are hearing could be a relay or breaker kicking in and out as a result of whatever is wrong.

This could be cause by:
1. A problem in the power supply.
2. A problem with the Horizontal Output Stage.
3. The Flyback transformer.

Someone gave me a TV once that had the same problem. I determined that it had a bad flyback transformer. I replaced the transformer and the TV worked about 5 secs before I saw some black smoke come out of the new flyback. I turned it off right away and realized that something else was bad that caused the original flyback to burn up. The same thing was causing the new flyback to go as well. It turned out to be a shorted, 50 cent hi-speed switching diode. Fortunately, because I had turned the set off quickly when the 2nd flyback started to smoke, once I replaced the diode, the TV was fixed.

If you want to get it working again, you'll need to have it serviced.

Good luck,
- Jim

Jan 26, 2008 | Zenith B27A11Z 27" TV

2 Answers

Flyback transformer!


I HAVE SANYO TRANFOMER MODEL NOS TSD-025U CAN I USE IN INDIA . THANKS

Oct 12, 2007 | Sanyo DS32830H 32" TV

1 Answer

Flyback


FLY BACK MEANS WHAT? is it flyback transformer or pulse fron eht to afc ckt. fly back transformer are available according to kit like toshiba sanyo philips

Sep 19, 2007 | Prima C2012 TV

3 Answers

Flyback transformer on television


Single white line across screen mean a vertical colapse. So you will need the vertical output and maybe a cap around 100uf@50v.

Sep 13, 2007 | RCA E13320 13" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...