Question about Televison & Video

1 Answer

I need the 4-digit code for a oneforall remote control model#urc-433-cb02

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

You can find the remote control codes for difrent brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing the following steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
If it hasn’t, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

Thank you for using FIXYA!

Cheers!
IrishDruid

Posted on May 02, 2008

  • Swilin Sampson
    Swilin Sampson May 31, 2008

    Hi,




    Just wanted to inquire if your issue is resolved, or if there is anything
    further I can do to assist you…





    P.S. -You can rate this solution with one of
    four votes, if you feel your issue is resolved.






    • "FixYa!"
      - The solution provides great advice on how to solve the problem.
      (Positive Rating)

    • "Helpful"
      - The solution provides useful leads that helps solve the problem.
      (Positive Rating)

    • "Thanks
      for Trying
      " - The solution does not solve the problem but the
      effort is appreciated. (Negative Rating)

    • "Inappropriate"
      - The solution has absolutely nothing to do with the problem.
      (Negative
      Rating)


    If your issue is not still not resolved, do not
    assign a rating just yet. Please post back as to what steps you took, results,
    etc, and I will try to assist you further as best I can.






    Thank you for using FIXYA!





    IrishDruid




×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an One For All URC-4700B00 Acess 4 remote control which I have lost the codes for! I need to program a Sharp television but I need the 4 digit codes.


Hi,
I recently came across this link that has the codes for many manufacturer's remote controls. I don't know if it will help you, but give it a shot and let me know. Here it is.
Best Regards,
Mark

http://www.hifi-remote.com/ofa/codes.shtml

Jan 24, 2011 | Televison & Video

2 Answers

Ive lost my code book to my tv remote. so i havent had tv for a couple of days lol. the remote mak is Total Control URC-11-2840 and my tv is a sony i need the 4 digit code can you please help. much...


Sony 4 Digital Codes 0000 this is the only code showing in my book for sony RCA uses 000 for theres You can go to dollar store buy remote handunit for 5.00 with codes to TVs.

Jan 02, 2009 | Televison & Video

1 Answer

I have a Tevion 19" LCD TV/DVD Combi with built in freeview. Model number 1961hdt. The remote that came with it is not working and I have a oneforall universal remote, model no. URC-7556. The problem...


I still haven't found the code, but I managed to find a telephone number for a warranty centre that is able to replace the original remote control.

Jun 19, 2008 | Televison & Video

2 Answers

Need manual/code book for oneforall.com remote for toschiba tv


hi having a problem.getting ther code for a sharp lcd projector.model pg-c20x.have one for all urc-7740.tried all the codes and search methods.no joy.

May 21, 2008 | Mitsubishi VS-50605 50" Rear Projection...

1 Answer

I need the remote control code so that my oneforall (URC-7930 remote control) will work on my Pioneer (XV-HTD1) DVD player as I have lost the remote (XXD3033). Thanks for any help


Go to this page, the download of the manual of your remote will automatically start. From page 123 you can find the codes for several brands. On page 129 you can find the codes for Pioneer. Just try them until you find one that works.
The manual also explains how to set up the remote for your dvd-player.

Apr 03, 2008 | Televison & Video

1 Answer

TV Remote


Go to www.oneforall-int.com They should have your codes available there . Good luck

Mar 04, 2008 | Televison & Video

1 Answer

I need the SETUP


Go to www.oneforall-int.com for the list of codes your looking for . Good luck

Mar 04, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69745 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...